Wacker Neuson 50Z3 Operator's Manual - page 16
OM 50Z3 6003 US – Edition 3.5 * 5003b110.fm
1-15
Introduction
Safety Labels
Always follow the instructions on the safety labels!
Description
The label means the following:
• Potential high pressure grease discharge from the track tension adjustment fitting.
• Always read the operator’s manual before relaising or tightening the tracks to avoid
potential injury from ejected grease.
Location
On the undercarriage near the opening or relaising to insert the grease fitting.
Description
Attention! Stop the engine before opening the safety devices ( like engine hood, fan
guard,...)
Location
On the chassis near handle engine cover.
Description
This safety label warns of the following hazards:
Cutting hazard. Cooling fan can cut when rotating. Stop engine before working on the
engine or cooling system.
Entanglement hazard. You can be pinched or entangled in the engine V-belt when the
engine is running. Stop engine before working on the engine.
Hot surface and burn hazards. Do not touch.
Contents are under pressure. Do not remove cap.
Location
In the engine compartment.
Description
Hot surface! Do not touch.
Location
Engine compartment near muffler system.
Fig. 14: Tighten tracks
Fig. 15: Prohibitory label
Fig. 16: Rotating V-belt
Fig. 17: Hot surfaces