Wacker Neuson BTS 630 Use And Operation - page 3
BTS 630, 635
9 Use and operation
Operator's manual
45
Starting the engine
Note: When starting the engine, move to a position at least 3 m from the fueling
area.
1. Grasp the front handle with one hand.
2. Place your foot in the rear handle to stabilize the machine.
3. Pull out the starter rope slowly until compression resistance can be felt and
then let it slowly roll back in again.
NOTICE
Improper handling can damage the machine.
f Do not pull the starter rope as far as it can go.
f Let starter rope slowly roll back in.
CAUTION
Incorrect handling during starting can result in minor injuries.
f Do not pull the starter rope until sufficient space is available and nobody is in
the immediate vicinity.
Item
Designation
Item
Designation
1
Starter rope
3
Rear handle
2
Front handle