1. DL manuals
  2. Wacker Neuson
  3. Lawn and Garden Equipment
  4. WL 750
  5. Operator's Manual

Wacker Neuson WL 750 Operator's Manual

Manual is about: wheel loaders

Summary of WL 750

  • Page 1

    Wheel loaders wl 750 wl 850 operator's manual 1000184973 us 2.1 0909 www.Wackerneuson.Com 1 0 0 0 1 8 4 9 7 3.

  • Page 2: 1 Introduction

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-1 introduction 1 introduction 1.1 important information on this operator's manual this operator's manual contains important information on how to work safely, correctly and economically with the machine. Therefore, it aims not only at new operators, b...

  • Page 3

    1-2 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction 1.2 machine overview fig. 1: machine outside views pos. Description 1 service flap (fuses, relays, recirculated air filter) 2 rearview mirror 3 handle 4 working lights 5 eye hook for removing the cab only (may not be used for crane-lift...

  • Page 4

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-3 introduction 1.3 models and trade names: overview 1.4 brief description of the wheel loader the wheel loader is a self-propelled work machine according to german traffic regulations. Get informed on and follow the legal regulations of your country. ...

  • Page 5

    1-4 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction hydrostatic drive the diesel engine permanently drives a hydraulic pump (variable displacement pump), whose oil flow is sent to a hydraulic motor flanged on the gearbox. The force of the hydrau- lic motor is transmitted to the rear axle...

  • Page 6

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-5 introduction 1.5 fields of application and using the wheel loader with an attachment the attachments installed determine the intended use of this machine. Note that not all attachments listed in the table comply with local traffic regulations. The a...

  • Page 7

    1-6 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction see “merkblatt für anbaugeräte“ (leaflet with specific instructions for attachments) § 30 clauses 10/11/12 of the stvzo german road traffic regulations for further information on mounting attachments. High-tilt bucket 3, 4, 5 wl 750 100...

  • Page 8

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-7 introduction 1.6 ec declaration of conformity, model 346-03 (wl 750) ec declaration of conformity manufacturer kramer-werke gmbh wacker-neuson-str. 1 d-88630 pfullendorf product conformity assessment procedure according to 2000/14/ec, appendix viii,...

  • Page 9

    1-8 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction 1.7 ec declaration of conformity, model 346-04 (wl 850) ec declaration of conformity manufacturer kramer-werke gmbh wacker-neuson-str. 1 d-88630 pfullendorf product conformity assessment procedure according to 2000/14/ec, appendix viii,...

  • Page 10

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-9 introduction 1.8 type labels and component numbers serial number the serial number is stamped on the machine frame a (next to the cab attachment, on the right in traveling direction). It is also located on the type label b (fig. 2). The type label b...

  • Page 11

    1-10 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction hydraulic pump serial number the type label (arrow) is located on the hydraulic pump housing (next to where the pump is installed on the diesel engine) hydraulic motor serial number the type label (arrow) is located on the hydraulic mo...

  • Page 12

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-11 introduction 1.9 labels overview xx n = 1900kg n = 1400kg 1000149082 346-01.

  • Page 13

    1-12 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction 1.10 signs and symbols labels on the outside of the machine label: cab eye hooks the eye hooks on the cab are for removing the cab only and may not be used for crane handling the machine – see chapter 3 “crane handling the machine” on ...

  • Page 14

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-13 introduction labels inside the cab description (example) ... When using pallet forks with fork arms: the framed numbers indicate the maximum authorized load on the fork arms for industrial and off-road applications respectively. The maximum load va...

  • Page 15

    1-14 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction description brake fluid label. Use only lhm brake fluids. ➥ – see chapter 5 “maintenance of the brake system” on page 5-21 ➥ – see chapter 5 “fluids and lubricants” on page 5-37 location on the brake-fluid reservoir description caution...

  • Page 16

    Ba 34603_04 us – edition 2.1 * 34603_04b110.Fm 1-15 introduction description warning! Do not raise or transport persons in the bucket or on the pallet forks. Location: in the cab on the cover plate between the steering wheel and the front window. . Description collision hazard! Bystanders must stay ...

  • Page 17

    1-16 ba 34603_04 us – edition 2.1 * 34603_04b110.Fm introduction description burn hazard! Do not touch. Location: in the engine compartment on the right on the sheet-metal separation of the radiator, next to the muffler. Description filler opening for hydraulic oil. Location: in the engine compartme...