- DL manuals
- Wacom
- Monitor
- DTF-521 series
- Installation And User Manual
Wacom DTF-521 series Installation And User Manual
Summary of DTF-521 series
Page 1
Pen display installation & user’s guide for dtf-521/pl-521 series www.Wacom.Com dtf521_manual.Fm page -1 tuesday, february 28, 2006 10:36 am.
Page 2
(this page intentionally left blank.) dtf521_manual.Fm page 0 tuesday, february 28, 2006 10:36 am.
Page 3: Introduction and Overview
Introduction and overview page 1 introduction and overview the wacom ® dtf-521/pl-521 pen display combines the benefits of an lcd monitor with the control, comfort, and productivity of wacom’s cordless, battery-free pen technology. This gives you a direct pen-on-screen interface that can be used wit...
Page 4
Precautions on use and handling page 2 precautions on use and handling be sure to follow all instructions, cautions, and warnings found within this guide. Failure to do so could cause the loss of data or damage to your computer. Failure to do so could also void your warranty, in which case wacom sha...
Page 5
Precautions on use and handling page 3 handling w arning high voltage. Do not open or disassemble the dtf-521/pl-521 pen display. There is a risk of electrical shock when the casing is open. This will also void your warranty and wacom shall have no responsibility to repair or replace the product. W ...
Page 6
Precautions on use and handling page 4 c aution do not expose the dtf-521/pl-521 to high voltage electrostatic discharges or to a build-up of an electrostatic charge on the lcd screen. This may result in a temporary discoloration and blotching of the lcd monitor. If discolorations occur, leave the d...
Page 7: Contents
Contents page 5 contents introduction and overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 precautions on use and handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 physical location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 8: Unpacking Your Pen Display
Unpacking your pen display page 6 unpacking your pen display package contents your product came with the following items: notes: images are not shown to scale. Some product configurations may come with different pens having no side switch. Some configurations may include additional cds containing ap...
Page 9: Pen Display Components
Pen display components page 7 pen display components the lcd monitor and tablet sensor function as an integrated input and output device. The lcd monitor supports resolutions up to 1024 x 768 pixels at 16.2 million colors. The tablet sensor reports pen coordinates, pressure, and switch information. ...
Page 10
Pen display components page 8 rear view next step: installation . See page 9. Video, usb, and power connectors kensington security slot allows easy attachment of a security cable. Pen tether attachment points if you will be using the pen tether, use the tether attachment ring and small thumb screw t...
Page 11: Installation
Installation page 9 installation system requirements before installing the dtf-521/pl-521 pen display, make sure your computer meets the following system requirements: • pc. Windows xp, xp x64, 2000, me, or 98se. Vga video connector, available usb port, and cd-rom drive. • macintosh. Os x, v10.2.8 o...
Page 12
Installation page 10 step 1: lcd monitor installation in the first stage of the installation process, the dtf-521/pl-521 is installed as a monitor on your system. As you work through the first stage of the installation process, please refer to the lcd monitor cabling diagram on the following page wh...
Page 13
Installation page 11 lcd monitor cabling diagram dtf-521/pl-521, rear view – b – dc in (12v) – a – vga cable video card rear panel of your computer analog rgb out do not attach the usb data cable until instructed to do so. Power adapter – c – to ac outlet c aution use only the power adapter that cam...
Page 14
Installation page 12 • turn on the dtf-521/pl-521. The power led will light orange. • next, turn on your computer. Windows xp, xp x64, and 2000: the dtf-521/pl-521 will automatically install as a default monitor. Windows 98se and me: the n ew h ardware w izard will display. Follow the prompts select...
Page 15
Installation page 13 step 2: pen tablet installation usb cable installation plug the square end of the usb cable into the dtf-521/pl-521 port labeled usb. Plug the other end into an available usb port on your computer or on a usb hub attached to your computer. See – d – in the connection diagram bel...
Page 16
Installation page 14 software installation to install the tablet software: • save your work and close all open applications before installing the tablet software. Temporarily disable any virus protection programs. • insert the wacom pen tablet driver cd into your computer’s cd-rom drive. If the soft...
Page 17
Working with your pen display page 15 working with your pen display as you work with the dtf-521/pl-521 pen display you can rest your hand lightly on the display screen, just as if it were a drawing board or sheet of paper. • because the pen display drawing surface will be a little higher than your ...
Page 18
Working with your pen display page 16 using the pen as you work with the dtf-521/pl-521 you can rest your hand lightly on the display screen, just as if it were a drawing board or sheet of paper. The wacom pen is cordless, battery-free, and sensitive to the pressure you exert upon it. Hold the pen l...
Page 19
Working with your pen display page 17 pen operations the basic methods of working with the pen are as follows: pointing and selecting: move the pen above the dtf-521/pl-521 display screen to position the screen cursor. The pen tip needs to be within 5 mm (0.2 inch) of the pen display tablet surface;...
Page 20: Customizing
Customizing page 18 customizing after you master the basics of using your pen on the dtf-521/pl-521 pen display, you may want to customize the way the pen works. The pen tablet control panel makes it easy to customize your pen display and pen. Opening the control panel to open the control panel, use...
Page 21
Customizing page 19 control panel overview open the pen tablet control panel to customize your product. Experiment with different settings to find what works best for you. Any changes you make will take effect immediately, but you can always click d efault to return to the factory settings. Addition...
Page 22
Customizing page 20 calibrating your pen display you will need to calibrate the dtf-521/pl-521 pen display tablet in order to align the screen cursor position with the position of the pen on the display screen. This is required to adjust for parallax caused by the acrylic display screen cover and co...
Page 23
Customizing page 21 control panel details adjusting double-click double-clicking with the pen tip can be made easier by expanding the tap area that accepts a double- click (the double-click distance), or by using the pen’s side switch to automatically double-click when pressed. A large double-click ...
Page 24
Customizing page 22 k eystroke .... Enables you to simulate keystrokes. Selecting this option displays the d efine k eystroke dialog box where you can enter a keystroke or keystroke sequence to play back at the press of a button. M odifier .... Enables you to assign modifier key(s) (such as s hift o...
Page 25
Customizing page 23 m ode t oggle .... Toggles between the pen tracking mode (pen mode) and mouse mode. The tracking mode you select determines the relationship between pen movement and cursor movement. • with the pen display tablet correctly calibrated in pen mode, the screen cursor should always f...
Page 26
Customizing page 24 adjusting the lcd monitor factory presets, auto-sync, and user settings factory presets: for optimal display quality, set your video card to the dtf-521/pl-521’s native resolution of 1024 x 768 pixels. See page 43 for signal specifications. Auto-sync: the dtf-521/pl-521 attempts ...
Page 27
Customizing page 25 when you open the on screen display, the following menu option icons are displayed: c ontrast . Select to increase or decrease image contrast. B rightness . Select to increase or decrease image brightness. P hase . Select to reduce or eliminate horizontal distortion lines. To aut...
Page 28
Customizing page 26 b acklight . Select to increase or decrease the backlight brightness level. C olor . Provides color temperature settings for 9300˚, 6500˚, and 5000˚ kelvin. D irect displays the received signal as it is without any adjustment. When d irect is selected, the b rightness and c ontra...
Page 29
Customizing page 27 adjusting pitch and phase some computers and video cards may not allow the auto-sync function to fully work when the dtf-521/pl-521 is first connected. If some portion of text appears blurred, adjust pitch and phase by following the procedure below. For crisp images, set the reso...
Page 30
Customizing page 28 power saving the dtf-521/pl-521 conforms to vesa and energy star ® power saving guidelines. When using the dtf-521/pl-521 with a display power management signaling (dpms) compliant computer or video card, the display will automatically comply with the below power saving parameter...
Page 31: Troubleshooting
Troubleshooting page 29 troubleshooting most of the time your pen display tablet will work flawlessly. But if you are having trouble, wacom recommends you do the following: 1. If the dtf-521/pl-521 pen display does not function properly, refer to the troubleshooting section below. See also display t...
Page 32
Troubleshooting page 30 3. Verify that the tablet and pen are working: • press the pen tip against the display and verify that the status led lights blue. • if the led does not light, verify that the dtf-521/pl-521’s usb cable is plugged into an active usb port. If the pen display is plugged into a ...
Page 33
Troubleshooting page 31 display troubleshooting if you encounter problems with the dtf-521/pl-521 display, refer to the following tables; your problem may be described here and you can try the solution offered. For additional information about color issues, refer to the documentation that came with ...
Page 34
Troubleshooting page 32 vga problems the image appears multiple times on the display. • do not extend the video cable. Do not use an input selector switch box. When a still image is displayed for a long period of time without refreshing the screen, an after- image remains for a short period of time....
Page 35
Troubleshooting page 33 pen tablet troubleshooting if you encounter problems with the dtf-521/pl-521 pen display, refer to the following tables. Your problem may be described here, and you can try the solution offered. Be sure you refer to the dtf-521/pl-521 read me file for the latest information. ...
Page 36
Troubleshooting page 34 you notice a delay at the beginning of pen strokes. Try decreasing the d ouble c lick d istance . See adjusting double- click on page 21. You have to press hard with the pen when clicking or drawing. Open the pen tablet control panel and go to the p en tab. Move the t ip f ee...
Page 37
Troubleshooting page 35 when using the pen display tablet on a multiple monitor system, you cannot use the pen to control the other monitor(s). You can use your pen to control the other monitors in mouse mode. To use mouse mode, first set the pen’s duoswitch to m ode t oggle .... Then use the switch...
Page 38
Troubleshooting page 36 windows-specific problems after changing right- and left-handed settings in the computer’s mouse control panel, the pen tip no longer functions properly. Restart windows for your wacom tool settings to be correctly recognized. Windows 98se or me: your pen does not function in...
Page 39
Troubleshooting page 37 macintosh-specific problems at startup, a dialog box appears telling you that either the driver failed to load or the tablet preferences have not yet been created. The pen display tablet was not detected at startup. Check that the usb interface cable is securely connected to ...
Page 40
Troubleshooting page 38 technical support options if you have a problem with your pen display, first check the appropriate installation section in this guide to make sure the unit is installed correctly. Then review the troubleshooting procedures within this guide; your problem may be described ther...
Page 41
Troubleshooting page 39 obtaining driver downloads wacom periodically updates the pen tablet software driver to maintain compatibility with new products. If you are having a compatibility problem between your pen display and a new hardware or software product, it may be helpful to download a new wac...
Page 42: Appendix
Appendix page 40 appendix caring for your pen display keep the pen and your pen display lcd screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the display screen surface. Regular cleaning will help prolong the life of your lcd screen surface and pen. Keep the pen di...
Page 43
Appendix page 41 using an alternate mount or stand if you will be using the dtf-521/pl-521 pen display in an installation that requires the use of an alternate mounting platform, you can remove the adjustable stand from the unit and mount the pen display onto any mount arm or stand conforming to the...
Page 44
Appendix page 42 uninstalling the dtf-521/pl-521 follow the appropriate procedure below to remove the wacom tablet software and the dtf-521/pl-521 pen display from your system. Important: when you remove the wacom tablet driver software from your system, any other wacom tablet connected to your comp...
Page 45
Appendix page 43 product specifications general specifications lcd monitor physical dimensions (w x d x h) 344.0 x 300.0 x 49.0 mm (13.6 x 11.8 x 1.9 in), excluding stand weight 4.6 kg (10.1 lb), including stand input voltage 12 vdc power consumption 23w or less operating temperature and humidity 5°...
Page 46
Appendix page 44 pen tablet power adapter pen (model fp-320) purchasing parts and accessories to purchase parts and accessories, refer to the wacom pen display read me file and see who to call for your region. You can also do the following: to purchase parts and accessories in the usa or canada, cal...
Page 47
Appendix page 45 radio and television interference the equipment described in this manual generates, uses, and can radiate radio-frequency energy. If it is not installed and used properly – that is, in strict accordance with applicable instructions – it may cause interference with radio and televisi...
Page 48
Appendix page 46 warranty (worldwide, except for europe, africa and middle east) limited warranty wacom warrants the product, to the original consumer purchaser, except for the software and consumable items such as the pen nibs, to be free from defects in materials and workmanship under normal use a...
Page 49
Appendix page 47 warranty service in the u.S.A. And canada to obtain warranty service within the u.S. Or canada contact: wacom technical support phone: 1.360.896.9833 fax: 1.360.896.9724 e-mail: http://www.Wacom.Com/productsupport/email.Cfm support@wacom.Com warranty service outside of the u.S.A. An...
Page 50
Appendix page 48 license and warranty (europe, africa and middle east) software license agreement important notice to customers this product contains copyrighted computer programs (“software”) which are the inalienable intellectual property of wacom europe gmbh (“wacom”). This software is both integ...
Page 51
Appendix page 49 wacom shall have no responsibility to repair or replace the product if (a), in the opinion of wacom, the failure of the product has resulted from accident, abuse, misuse, negligence, misapplication, or unauthorized modification or repair, or (b) the product has been handled or store...
Page 52
Appendix page 50 (this page intentionally left blank.) dtf521_manual.Fm page 50 tuesday, february 28, 2006 10:36 am.