WAGNER KYOTO Manual - Assembly
6
GB
ASSEMBLY
• Carefully remove your KYOTO and the fittings out of the box.
• Pull the orange-marked foil strip out of your KYOTO.
Your KYOTO is now ready for operation.
• Screw the suspension hook to one or both poles together according to the
desired height.
WARNING! Contact with hidden lines can lead to severe injury or even
death! Please ensure while digging and boring holes that you do not hit
any hidden lines.
• Drive the ground spike into the ground.s
• Put the pole into the ground spike.
• Fit the lamp unit with the lug into the suspension hook.
ERECTION
Select a location for erection with as much exposure to solar radiation as
possible and put KYOTO into the ground. Do not erect KYOTO in the shade of
trees, shrubbery or buildings, otherwise the loading effect of your KYOTO will
be diminished.
PERFORMANCE
The performance of your KYOTO depends on the time of year. KYOTO is
ready for operation longer in summer than in winter.
How long KYOTO shines at night depends on how long KYOTO was
exposed to direct solar radiation during the day. For example, when the sky is
overcast, less solar energy is available to load the rechargeable battery.
During the following night, the duration of emission of light of KYOTO is
therefore shorter.
The duration of emission of light is strongly limited on winter days due to lower
exposure to solar radiation.
NOTE: Clean the solar module regularly with a damp towel to guarantee
optimum performance of the solar collectors. Do not use any solvents for
cleaning. Do not put any pressure on the solar module during cleaning.
☞
☞