1. DL manuals
  2. WAGO
  3. I/O Systems
  4. 750-8207
  5. Manual

WAGO 750-8207 Manual

Manual is about: PFC200 CS 2ETH RS 3G PLC - Controller PFC200

Summary of 750-8207

  • Page 1

    Manual wago-i/o-system 750 750-8207(/xxx-xxx) pfc200 cs 2eth rs 3g plc - controller pfc200 draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09).

  • Page 2

    2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) © 2017 wago kontakttechnik gmbh & co. Kg all rights reserved. Wago kontakttechnik gmbh & co. Kg hansastraße 27 d-32423 minden phone: +49 (0) 571/8 87 – 0 fax: +49 (0) 57...

  • Page 3: Table Of Contents

    Wago-i/o-system 750 table of contents 3 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table of contents 1 notes about this documentation ........................................................... 15 1.1 validity of this documentation......

  • Page 4

    4 table of contents wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.9.1 device data ..................................................................................... 49 3.9.2 system data .............................

  • Page 5

    Wago-i/o-system 750 table of contents 5 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5.6 inserting devices .................................................................................. 77 5.6.1 inserting the controller ...............

  • Page 6

    6 table of contents wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.8.3 “dns server” group ............................................................. 114 7.8.1.9 “ethernet configuration” page .....................

  • Page 7

    Wago-i/o-system 750 table of contents 7 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.24.4 “http” group ....................................................................... 139 7.8.1.24.5 “https” group .............................

  • Page 8

    8 table of contents wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.1 cbm menu structure overview ................................................. 164 7.8.4.2 “information” menu .....................................

  • Page 9

    Wago-i/o-system 750 table of contents 9 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.9 “mass storage” menu ................................................................ 197 7.8.4.9.1 “mass storage” > “sd card” submenu ............

  • Page 10

    10 table of contents wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.5 system events ................................................................................... 244 8.5.1 creating an event handler ...............

  • Page 11

    Wago-i/o-system 750 table of contents 11 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.4.1 modbus mapping for write bit services fc1, fc2 .................. 286 10.4.4.2 modbus mapping for write bit services fc5, fc15 .................

  • Page 12

    12 table of contents wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.2 status registers ............................................................................. 315 11.2.2.1 plc status register ..................

  • Page 13

    Wago-i/o-system 750 table of contents 13 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.1.6 8 channel digital input modules ................................................ 346 15.1.1.7 8 channel digital input module ptc with diagnos...

  • Page 14

    14 table of contents wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.2.1 general libraries ........................................................................... 374 15.2.1.1 codesys system libraries ..............

  • Page 15: 1.1

    Wago-i/o-system 750 notes about this documentation 15 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 1 notes about this documentation always retain this documentation! This documentation is part of the product. Therefore, retain the docum...

  • Page 16: 1.3

    16 notes about this documentation wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 1.3 symbols personal injury! Indicates a high-risk, imminently hazardous situation which, if not avoided, will result in death or serious...

  • Page 17

    Wago-i/o-system 750 notes about this documentation 17 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) additional information: refers to additional information which is not an integral part of this documentation (e.G., the internet)..

  • Page 18: 1.4

    18 notes about this documentation wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 1.4 number notation table 2: number notation number code example note decimal 100 normal notation hexadecimal 0x64 c notation binary '100...

  • Page 19: Important Notes

    Wago-i/o-system 750 important notes 19 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 2 important notes this section includes an overall summary of the most important safety requirements and notes that are mentioned in each individual sec...

  • Page 20: 2.1.4

    20 important notes wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet. 2.1.4 technical condition of specified...

  • Page 21: 2.2

    Wago-i/o-system 750 important notes 21 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 2.2 safety advice (precautions) for installing and operating purposes of the relevant device to your system the following safety precautions shall be ob...

  • Page 22: 2.3

    22 important notes wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) clean only with permitted materials! Clean soiled contacts using oil-free compressed air or with ethyl alcohol and leather cloths. Do not use any contac...

  • Page 23: 2.4

    Wago-i/o-system 750 important notes 23 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 2.4 licensing terms of the software package used the firmware for the “pfc200 cs 2eth rs 3g” controller (750-8207) contains open-source software. The li...

  • Page 24: Device Description

    24 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3 device description the controller 750-8207(pfc200 cs 2eth rs 3g) is an automation device that can perform control tasks of a plc. It is suitable fo...

  • Page 25

    Wago-i/o-system 750 device description 25 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) • modbus udp master/slave • modbus rtu master/slave (via rs-232 or rs-485) in the controller, all input signals from the sensors are combined. After ...

  • Page 26

    26 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) memory card is not included in the scope of delivery! Note, the controller is delivered without memory card. To use a memory card, you must order one...

  • Page 27: 3.1

    Wago-i/o-system 750 device description 27 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.1 view figure 1: view of device table 4: legend for figure “view” item description see section 1 marking options (mini-wsb) --- 2 led indicators – ...

  • Page 28

    28 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11 mode selector switch “operating elements” > “mode selector switch” 12 ethernet connections “connections” > “network connections ethernet – x1, x2”...

  • Page 29: 3.2

    Wago-i/o-system 750 device description 29 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.2 labeling the front labeling includes: - device designation - name of the display elements, connections and control elements - serial number with ...

  • Page 30: 3.3

    30 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3 connectors 3.3.1 data contacts/internal bus do not place the i/o modules on the gold spring contacts! Do not place the i/o modules on the gold sp...

  • Page 31: 3.3.2

    Wago-i/o-system 750 device description 31 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.2 power jumper contacts/field supply risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. Handle the i/o module ...

  • Page 32: 3.3.3

    32 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.3 cage clamp ® connectors figure 5: cage clamp ® connections table 6: legend for figure “cage clamp ® connections” contact description descriptio...

  • Page 33: 3.3.4

    Wago-i/o-system 750 device description 33 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.4 service interface the service interface is located behind the flap. The service interface is used for communication with wago-i/o-check and wag...

  • Page 34: 3.3.5

    34 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.5 network connections – x1, x2 figure 7: network connections – x1, x2 table 8: legend for figure “network connections – x1, x2” contact signal de...

  • Page 35: 3.3.6

    Wago-i/o-system 750 device description 35 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) kommuni kati onsanschluss 3.3.6 rs-232/rs-485 – x3 communication connection figure 8: rs-232/rs-485 – x3 communication connection table 9: legend for...

  • Page 36

    36 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.6.1 operating as an rs-232 interface depending on the device type dte (e.G., pc) or dce (e.G., pfc, modem), the rs-232 signals have different dat...

  • Page 37

    Wago-i/o-system 750 device description 37 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.6.2 operating as an rs-485 interface to minimize reflection at the end of the line, the rs-485 line must be terminated at both ends by a cable te...

  • Page 38: 3.3.7

    38 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.3.7 mobile radio antenna the screw connector (sma jack) for the mobile radio antenna is located at the front of the housing. Figure 12: mobile radi...

  • Page 39: 3.4

    Wago-i/o-system 750 device description 39 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.4 display elements 3.4.1 power supply indicating elements figure 13: power supply indicating elements table 11: legend for figure “power supply ind...

  • Page 40: 3.4.2

    40 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.4.2 fieldbus/system indicating elements figure 14: indicating elements for fieldbus/system table 12: legend for figure “fieldbus/system indicating ...

  • Page 41: 3.4.3

    Wago-i/o-system 750 device description 41 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.4.3 memory card indicating elements figure 15: indicating elements, memory card slot table 13: legend for figure “indicating elements, memory card ...

  • Page 42: 3.4.4

    42 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.4.4 network indicating elements figure 16: indicating elements, rj-45 jacks table 14: legend for figure “indicating elements, rj-45 jacks” descript...

  • Page 43: 3.4.5

    Wago-i/o-system 750 device description 43 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.4.5 mobile radio network status indicators figure 17: mobile radio network status indicators table 15: legend for the “mobile radio network status ...

  • Page 44: 3.5

    44 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.5 operating elements 3.5.1 operating mode switch figure 18: mode selector switch the function of the mode selector switch depends on the activated ...

  • Page 45: 3.5.2

    Wago-i/o-system 750 device description 45 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.5.2 reset button figure 19: reset button the reset button is installed behind drilling to prevent operating errors. It is a shortstroke button with...

  • Page 46: 3.6

    46 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.6 slot for memory card figure 20: slot for sd memory card the slot for the sd memory card is located on the front of the housing. The memory card i...

  • Page 47: 3.7

    Wago-i/o-system 750 device description 47 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.7 sim card slot figure 21: sim card slot table 18: legend for figure “sim card slot” positio n description 1 release button for sim card slot 2 sim...

  • Page 48: 3.8

    48 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.8 schematic diagram figure 22: schematic diagram.

  • Page 49: 3.9

    Wago-i/o-system 750 device description 49 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.9 technical data 3.9.1 device data table 19: technical data − device data width 103 mm height (from upper edge of din 35 rail) 65 mm length 100 mm ...

  • Page 50: 3.9.4

    50 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.9.4 clock table 22: technical data – clock drift - system clock (25 °c) 20 ppm drift - rtc (25 °c) 3 ppm buffer time rtc (25 °c) 30 days 3.9.5 prog...

  • Page 51: 3.9.7

    Wago-i/o-system 750 device description 51 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.9.7 ethernet table 25: technical data – ethernet ethernet 2 x rj-45 (switched or separated mode) transmission medium twisted pair s-utp, 100 Ω, cat...

  • Page 52

    52 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 29: technical data – power jumper contacts power jumper contacts spring contact, self-cleaning table 30: technical data – data contacts data co...

  • Page 53: 3.10  Approvals

    Wago-i/o-system 750 device description 53 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3.10 approvals more information about approvals. Detailed references to the approvals are listed in the document “overview approvals wago-i/o-system ...

  • Page 54

    54 device description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) emc ce-emission of interference en 61000-6-3.

  • Page 55: Function Description

    Wago-i/o-system 750 function description 55 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4 function description 4.1 network 4.1.1 interface configuration the ethernet x1 and x2 interfaces of the controller are connected with an internal...

  • Page 56: 4.1.2

    56 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.1.2 network security 4.1.2.1 users and passwords several groups of users are provided in the controller which can be used for various services. D...

  • Page 57

    Wago-i/o-system 750 function description 57 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.1.2.1.2 wbm user group wbm has its own user administration system. The users in this system are isolated from the other user groups in the system...

  • Page 58

    58 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.1.2.2 web protocols for wbm access the http and https web protocols can be used to access the wbm pages for the controller. Https is preferred be...

  • Page 59

    Wago-i/o-system 750 function description 59 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) bsi guidelines on migration to tls 1.2 the german federal office for information security guidelines on migration to tls 1.2 contain “compatibility...

  • Page 60: 4.1.3

    60 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.1.3 network configuration 4.1.3.1 host name/domain name without a host name configuration, the controller is assigned a default name which includ...

  • Page 61

    Wago-i/o-system 750 function description 61 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) there are two possibilities here: 1. Default route if the “default” value is entered in the destination address field, a default route is defined. ...

  • Page 62: 4.1.4

    62 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.1.4 network services 4.1.4.1 dhcp client the controller can get network parameters from an external dhcp master via the dhcp client service. The ...

  • Page 63

    Wago-i/o-system 750 function description 63 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the settings are made, for example, in the wbm via the “dhcp configuration” page. The dhcp server also passes other parameters in addition to the i...

  • Page 64

    64 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) server must be manually configured. For the controller, the dhcp server service is handled by the program "dnsmasq". From a linux ® command line, a...

  • Page 65: 4.2

    Wago-i/o-system 750 function description 65 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.2 memory card function only use recommended memory cards! Use only the sd memory card available from wago (item no. 758-879/000- 001) as it is su...

  • Page 66

    66 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) memory card access from codesys only possible with fat16, fat32 or ntfs! If the codesys user “admin” (see the section “network” > “network security...

  • Page 67: 4.2.2

    Wago-i/o-system 750 function description 67 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.2.2 data backup the controller has a backup function and a restore function. The necessary settings can be made and the functions can be executed...

  • Page 68

    68 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the controller has an automatic update function. If this function is activated on a memory card before the data backup and a controller is booted f...

  • Page 69

    Wago-i/o-system 750 function description 69 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) file size must not exceed the size of the internal drive! Note that the amount of data in the media/sd/copy/ directory must not exceed the total si...

  • Page 70: 4.2.3

    70 function description wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.2.3 inserting a memory card during operation the fieldbus nodes and the plc program are running. Insert a memory card during ongoing operation. D...

  • Page 71: 4.2.5

    Wago-i/o-system 750 function description 71 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4.2.5 setting the home directory for the runtime system the home directory for the runtime system is located in the controller's internal memory by...

  • Page 72: Mounting

    72 mounting wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5 mounting 5.1 installation position along with horizontal and vertical installation, all other installation positions are allowed. Use an end stop in the case...

  • Page 73

    Wago-i/o-system 750 mounting 73 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) increase the total length using a coupler module for internal data bus extension! You can increase the total length of a fieldbus node by using a 750-628 i/o m...

  • Page 74: 5.3

    74 mounting wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5.3 mounting onto carrier rail 5.3.1 carrier rail properties all system components can be snapped directly onto a carrier rail in accordance with the european ...

  • Page 75: 5.3.2

    Wago-i/o-system 750 mounting 75 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5.3.2 wago din rails wago carrier rails meet the electrical and mechanical requirements shown in the table below. Table 35: wago din rails item no. Description...

  • Page 76: 5.5

    76 mounting wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5.5 mounting sequence fieldbus couplers/controllers and i/o modules of the wago-i/o-system 750 are snapped directly on a carrier rail in accordance with the eu...

  • Page 77: 5.6

    Wago-i/o-system 750 mounting 77 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5.6 inserting devices perform work on devices only if they are de-energized! Working on energized devices can damage them. Therefore, turn off the power supply...

  • Page 78: 5.6.2

    78 mounting wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5.6.2 inserting the i/o module 1. Position the i/o module so that the tongue and groove joints to the fieldbus coupler/controller or to the previous or possibl...

  • Page 79: Connect Devices

    Wago-i/o-system 750 connect devices 79 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 6 connect devices 6.1 connecting a conductor to the cage clamp ® the wago cage clamp ® connection is appropriate for solid, stranded and finely stranded...

  • Page 80: 6.2

    80 connect devices wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 6.2 power supply concept 6.2.1 fuse protection of the electronic circuit power supply only implement the electronic circuit power supply with a suitable...

  • Page 81: 6.2.2

    Wago-i/o-system 750 connect devices 81 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 6.2.2 supplementary power supply regulations the wago-i/o-system 750 can also be used in shipbuilding or offshore and onshore areas of work (e. G. Worki...

  • Page 82: Commissioning

    82 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7 commissioning 7.1 switching on the controller before switching on the controller ensure that you • have properly installed the controller (see section “...

  • Page 83: 7.2

    Wago-i/o-system 750 commissioning 83 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.2 determining the ip address of the host pc to ensure that the host pc can communicate with the controller via ethernet, both devices must be located in...

  • Page 84: 7.3

    84 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.3 setting an ip address in the controller's initial state the following ip addresses are active for the ethernet interface (port x1 and port x2): table ...

  • Page 85: 7.3.1

    Wago-i/o-system 750 commissioning 85 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.3.1 assigning an ip address using dhcp the controller can obtain dynamic ip addresses from a server (dhcp/bootp). In contrast to fixed ip addresses, dyn...

  • Page 86: 7.3.2

    86 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.3.2 changing an ip address using the “cbm” configuration tool via the serial interface you can also assign a new ip address to the ethernet interfaces x...

  • Page 87

    Wago-i/o-system 750 commissioning 87 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4. In the main menu use the keyboard (arrow keys or numeric keypad) to move to and select networking and then press [enter]. Figure 32: cbm – selecting “n...

  • Page 88

    88 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7. In the menu tcp/ip configuration select ip address and press [enter]. Figure 35: cbm – selecting the ip address 8. In the menu change ip address enter ...

  • Page 89: 7.3.3

    Wago-i/o-system 750 commissioning 89 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.3.3 changing an ip address using “wago ethernet settings” the microsoft windows ® application “wago ethernet settings” is a software used to identify th...

  • Page 90

    90 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5. Click [identify] to read in and identify the connected controller. 6. Select the “network” tab: figure 38: “wago ethernet settings” – “network” tab 7. ...

  • Page 91: 7.3.4

    Wago-i/o-system 750 commissioning 91 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.3.4 temporarily setting a fixed ip address this procedure temporarily sets the ip address for the x1 interface to the fixed address “192.168.1.17”. When...

  • Page 92: 7.4

    92 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.4 testing the network connection carry out a ping network function to check whether you can reach the controller at the ip address you have assigned in ...

  • Page 93: 7.5

    Wago-i/o-system 750 commissioning 93 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.5 changing standard passwords change passwords the standard passwords are documented in these instructions and therefore do not offer adequate protectio...

  • Page 94: 7.6

    94 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.6 shutdown/restart switch off the power supply to shut down the controller. To perform a controller restart, press the reset button as described in the ...

  • Page 95: 7.7

    Wago-i/o-system 750 commissioning 95 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.7 initiating reset functions you can initiate various reset functions using the mode selector switch and the reset button (rst). 7.7.1 warm start reset ...

  • Page 96: 7.7.3

    96 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) all e!Runtime applications are reset with a cold start reset. All global data and the retain variables are set to their initialization values. This corres...

  • Page 97: 7.8

    Wago-i/o-system 750 commissioning 97 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8 configuration the following methods are available for configuring the controller: • access to the web-based management system via the pc using an inte...

  • Page 98: 7.8.1

    98 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1 configuration via web-based-management (wbm) the html pages (from here on referred to as “pages”) of the web-based management are used to configure ...

  • Page 99

    Wago-i/o-system 750 commissioning 99 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) some pages of the wbm are accessible only for certain users. They are only displayed if you have logged into the wbm. You can access the login form via th...

  • Page 100

    100 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 41: password reminder table 39: user settings in the default state users password user user admin wago observe access rights users in wbm are auth...

  • Page 101

    Wago-i/o-system 750 commissioning 101 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 40: access rights for wbm pages navigation wbm page user – reboot reboot controller admin package server – firmware backup firmware backup admin – ...

  • Page 102

    102 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.2 general information about the page figure 42: wbm browser window (example) the device name is displayed in the header of the browser window. When...

  • Page 103

    Wago-i/o-system 750 commissioning 103 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) • wbm status: this indicates whether the wbm is currently communicating with the device in the background. In other words, one or more requests have been...

  • Page 104

    104 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) do not power cycle the controller after changing any parameters! Some parameter changes require a controller restart for the changes to apply. Saving cha...

  • Page 105

    Wago-i/o-system 750 commissioning 105 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.3 “status information” page the following tables explain the parameters listed on this page: 7.8.1.3.1 “controller details” group this group displa...

  • Page 106

    106 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.4 “general plc runtime configuration” page the settings for the boot project created with the programming software are given on the “general plc ru...

  • Page 107

    Wago-i/o-system 750 commissioning 107 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the home directory change only takes effect after restarting the controller. For this purpose, use the wbm reboot function. Do not shut down the controll...

  • Page 108

    108 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.5 “plc runtime information” page all information about the enabled runtime system and plc program created in the programming software is provided o...

  • Page 109

    Wago-i/o-system 750 commissioning 109 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.5.3 “task n” group(s) this group is only visible if codesys 2 is enabled as the runtime system. One dedicated group is displayed for each task when...

  • Page 110

    110 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.6 “plc webvisu” page the settings for the web visualization created in the runtime system are shown on the “plc webvisu” page. 7.8.1.6.1 “web serve...

  • Page 111

    Wago-i/o-system 750 commissioning 111 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.7 “configuration of host and domain name” page the settings for the general tcp/ip parameters are found on the “configuration of host and domain na...

  • Page 112

    112 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.8 “tcp/ip configuration” page the tcp/ip settings for the ethernet interfaces are shown on the “tcp/ip configuration” page. 7.8.1.8.1 “ip configura...

  • Page 113

    Wago-i/o-system 750 commissioning 113 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.8.2 “default gateway n” groups you can configure two default gateways. The controller transmits all network data not going to a station on the loca...

  • Page 114

    114 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.8.3 “dns server” group table 52: wbm “tcp/ip configuration” page – “dns server” group parameters explanation configured: none/ dns server n the add...

  • Page 115

    Wago-i/o-system 750 commissioning 115 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.9 “ethernet configuration” page the settings for ethernet tcp/ip are located on the “ethernet configuration” page. 7.8.1.9.1 “switch configuration”...

  • Page 116

    116 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 54: wbm “ethernet configuration” page – “interface xn” groups parameter explanation enabled you can enable or disable the interface. Autonegotiatio...

  • Page 117

    Wago-i/o-system 750 commissioning 117 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.10 “general firewall configuration” page 7.8.1.10.1 “global firewall parameters” group table 55: wbm “general firewall configuration” page – “globa...

  • Page 118

    118 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.10.2 “firewall parameters interface xxx” group these settings in this group refer to the configuration of the firewall at ip level. Table 56: wbm “...

  • Page 119

    Wago-i/o-system 750 commissioning 119 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.11 “configuration of mac address filter” page you set the firewall configuration at ethernet level on this page. The “mac address filter whitelist”...

  • Page 120

    120 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.11.2 “mac address filter state xn” group table 58: wbm “configuration of mac address filter” page – “mac address filter state xn” group parameters ...

  • Page 121

    Wago-i/o-system 750 commissioning 121 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.12 “configuration of user filter” page 7.8.1.12.1 “user filter” group table 60: wbm “configuration of user filter” page – “user filter” group param...

  • Page 122

    122 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.12.3 “add new user filter” group you can enter 10 filters. You only have to enter values in the fields that are to be set for the filter. At least ...

  • Page 123

    Wago-i/o-system 750 commissioning 123 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.13 “configuration of time and date” page the settings for date and time are shown on the “configuration of time and date” page. 7.8.1.13.1 “date on...

  • Page 124

    124 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.13.3 “time zone” group you can specify the appropriate time zone for your location in this group. The total number of possible time zones is over 5...

  • Page 125

    Wago-i/o-system 750 commissioning 125 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.13.4 “tz string” group in this group you can enter a time zone that is not contained in the “time zone” selection. If the controller can associate ...

  • Page 126

    126 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.14 “configuration of the users for the web-based management” page the settings for user administration are shown on this page. 7.8.1.14.1 “change p...

  • Page 127

    Wago-i/o-system 750 commissioning 127 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.15 “create bootable image” page you can create a bootable image on the “create bootable image” page. 7.8.1.15.1 "create bootable image from active ...

  • Page 128

    128 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) remove the memory card write protection! Because write access to the memory card is possible during the boot process, the memory card cannot be write pro...

  • Page 129

    Wago-i/o-system 750 commissioning 129 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.16 “configuration of serial interface rs232” page the settings for the serial interface are shown on the “configuration of serial interface rs232” ...

  • Page 130

    130 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.17 “configuration of service interface” page the settings for the service interface are shown on the “configuration of the service interface” page....

  • Page 131

    Wago-i/o-system 750 commissioning 131 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.18 “reboot controller” page the settings for the system reboot are shown on the “reboot controller” page. 7.8.1.18.1 “reboot controller” group clic...

  • Page 132

    132 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.19 “firmware backup” page you can find the controller data backup settings on the “firmware backup” page. Table 71: “firmware-backup” wbm page para...

  • Page 133

    Wago-i/o-system 750 commissioning 133 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) no backup of the memory card! Backup from the memory card to the internal flash memory is not possible. Account for backup time generation of backup file...

  • Page 134

    134 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.20 “firmware restore” page the settings for restoring the controller data are shown on the “firmware restore” page. Table 72: “firmware restore” wb...

  • Page 135

    Wago-i/o-system 750 commissioning 135 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) note the firmware version! Restoring the controller operating system (“system” selection) is only permissible and possible if the firmware versions at th...

  • Page 136

    136 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.21 “system partition” page the settings for specifying the partition that the system will be started from are shown on the “system partition” page....

  • Page 137

    Wago-i/o-system 750 commissioning 137 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.22 “mass storage” page a group containing information about the storage volume is displayed for each storage volume that is found, along with an ad...

  • Page 138

    138 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.23 “software uploads” page the settings for a device update are shown on the “software uploads” page. 7.8.1.23.1 “upload new software” group table ...

  • Page 139

    Wago-i/o-system 750 commissioning 139 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.24 “configuration of network services” page the settings for various services are shown on the “configuration of network services” page. Besides en...

  • Page 140

    140 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) disconnection abort on disabling if the http service is disabled, the connection to the controller can be closed. Then call up the wbm page again. 7.8.1....

  • Page 141

    Wago-i/o-system 750 commissioning 141 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.25 “configuration of ntp client” page the settings for the ntp service are shown on the “configuration of ntp client” page. 7.8.1.25.1 “ntp client ...

  • Page 142

    142 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.26 “configuration of plc runtime services” page the settings for various services of the activated runtime system are shown on the “configuration o...

  • Page 143

    Wago-i/o-system 750 commissioning 143 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09).

  • Page 144

    144 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.27 “ssh server settings” page the settings for the ssh service are shown on the “ssh server settings” page. 7.8.1.27.1 “ssh server” group table 87:...

  • Page 145

    Wago-i/o-system 750 commissioning 145 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.28 “tftp server” page the settings for the tftp service are shown on the “tftp server” page. 7.8.1.28.1 “tftp server” group table 88: wbm “tftp ser...

  • Page 146

    146 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.29 “dhcp configuration” page the settings for the dhcp service are shown on the “dhcp configuration” page. 7.8.1.29.1 “dhcp configuration xn” group...

  • Page 147

    Wago-i/o-system 750 commissioning 147 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.30 “configuration of dns service” page the settings for the dns service are shown on the “configuration of dns service” page. 7.8.1.30.1 “dns servi...

  • Page 148

    148 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.31 “modbus services configuration” page the settings for various modbus services are shown on the “modbus services configuration” page. The groups ...

  • Page 149

    Wago-i/o-system 750 commissioning 149 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.32 “configuration of general snmp parameters” page the general settings for snmp are given on the “configuration of general snmp parameters” page. ...

  • Page 150

    150 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.33 “configuration of snmp v1/v2c parameters” page the general settings for snmp v1/v2c are shown on the “configuration of snmp v1/v2c parameters” p...

  • Page 151

    Wago-i/o-system 750 commissioning 151 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.33.3 “trap receiver n” group(s) a dedicated group with the following information is displayed for each trap receiver: table 96: wbm “configuration ...

  • Page 152

    152 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.34 “configuration of snmp v3 users” page the general settings for snmp v3 are shown on the “configuration of snmp v3 users” page. 7.8.1.34.1 “actua...

  • Page 153

    Wago-i/o-system 750 commissioning 153 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.34.3 “add new v3 user” group you can enter 10 users. Table 100: wbm “configuration of snmp v3 users” page – “add new v3 user” group parameters expl...

  • Page 154

    154 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.35 “diagnostic information” page the settings for displaying diagnostic messages are shown on the “diagnostic information” page. Table 101: wbm “di...

  • Page 155

    Wago-i/o-system 750 commissioning 155 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.36 “configuration of internal 3g modem” page the modem settings are available on the “configuration of internal 3g modem” page. 7.8.1.36.1 “sim aut...

  • Page 156

    156 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.36.2 “mobile network configuration” group table 103: wbm “configuration of internal 3g modem” page – “mobile network configuration” group parameter...

  • Page 158

    158 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.36.5 “upload and activate new modem software” group table 106: wbm “configuration of internal 3g modem” page – “upload and activate new modem softw...

  • Page 159

    Wago-i/o-system 750 commissioning 159 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.37 “configuration of openvpn and ipsec” page the general settings for snmp v1/v2c are shown on the “configuration of snmp v1/v2c parameters” page. ...

  • Page 160

    160 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) to transfer the selected file from the controller to the pc, click [start download] button. The changes only take effect after restarting the controller....

  • Page 161

    Wago-i/o-system 750 commissioning 161 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.1.38 “security settings” page the network security settings are found on the “security settings” page. 7.8.1.38.1 “tls configuration” group table 112...

  • Page 162: 7.8.2

    162 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.2 “open source licenses” page the licence conditions for the open source software used for the controller are listed in alphabetical order on the “op...

  • Page 163: 7.8.3

    Wago-i/o-system 750 commissioning 163 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.3 “wago licenses” page the licence conditions for the wago software used in the controller are listed on the “wago licenses” page..

  • Page 164: 7.8.4

    164 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4 configuration using a terminal program (cbm) you can use the console-based management tool (cbm) to configure the controller via the ethernet inter...

  • Page 165

    Wago-i/o-system 750 commissioning 165 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 113: cbm menu structure menu hierarchy 1. Host-/domain name 2. Tcp/ip 0. Back to networking menu 1. Ip address 2. Default gateway 3. Dns server 3. ...

  • Page 166

    166 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 113: cbm menu structure menu hierarchy 1. Update script 10. Ports and services 0. Back to main menu 1. Telnet 2. Ftp 3. Ftps 4. Http 5. Https 6. Nt...

  • Page 167

    Wago-i/o-system 750 commissioning 167 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.2 “information” menu this menu contains other submenus with information on the controller and network. Table 114: “information” menu menu item expl...

  • Page 168

    168 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.2.2 “information” > “network details” submenu in this submenu, the network and interface properties of the controller are displayed. If the ehernet...

  • Page 169

    Wago-i/o-system 750 commissioning 169 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.3 “plc runtime” menu this menu contains other submenus with information and settings for the runtime system. Table 117: “plc runtime” menu menu ite...

  • Page 170

    170 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.3.2 “information” > “runtime version” submenu in this submenu, the runtime version is displayed. Table 119: “plc runtime” > “information” > “runtim...

  • Page 171

    Wago-i/o-system 750 commissioning 171 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.3.5 “information” > “number of tasks” submenu in this submenu, the number of tasks in the plc program are displayed. The submenu only appears when ...

  • Page 172

    172 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.3.8 “tasks” > “task n” submenu in this submenu, information on the selected task is displayed. The submenu only appears when codesys 2 is enabled a...

  • Page 173

    Wago-i/o-system 750 commissioning 173 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.3.10 “general configuration” > “plc runtime version” submenu in this submenu, select which plc runtime system is enabled. Table 127: “plc runtime” ...

  • Page 174

    174 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.3.12 “plc runtime” > “webvisu” submenu this submenu contains information and settings for the web visualization. Table 129: “plc runtime” > “webvis...

  • Page 175

    Wago-i/o-system 750 commissioning 175 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4 “networking” menu this menu contains other submenus with settings for the network configuration. Table 130: “networking” menu parameters explanat...

  • Page 176

    176 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4.2 “host/domain name” > “hostname” submenu in this submenu, you can set the hostname of the controller. Table 132: “networking” > “hostname” subme...

  • Page 177

    Wago-i/o-system 750 commissioning 177 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4.5 “tcp/ip” > “ip address” submenu this submenu contains other submenus with settings for the ethernet interfaces. The submenu only appears if the...

  • Page 178

    178 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4.7 “tcp/ip” > “default gateway” submenu this submenu contains other submenus with settings for the default gateway. Table 137: “networking” > “tcp...

  • Page 179

    Wago-i/o-system 750 commissioning 179 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4.9 “tcp/ip” > “dns server” submenu this submenu contains the settings for the dns server. Table 139: “networking” > “tcp/ip” > “dns server” submen...

  • Page 180

    180 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4.11 “ethernet” > “switch configuration” submenu this submenu contains the settings for the switch configuration. Table 141: “networking” > “ethern...

  • Page 181

    Wago-i/o-system 750 commissioning 181 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.4.13 “ethernet ports” > “interface xn” submenu this submenu contains the settings for the selected ethernet interface. Table 143: “networking” > “e...

  • Page 182

    182 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5 “firewall” menu this menu contains other submenus for the firewall functionality settings. Table 144: “firewall” menu menu item explanation 0. Ba...

  • Page 183

    Wago-i/o-system 750 commissioning 183 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5.1 “firewall” > “general configuration” submenu this submenu contains the general settings for the firewall. Table 145: “firewall” > “general conf...

  • Page 184

    184 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5.2 “general configuration” > “interface xxx” submenu this submenu contains the firewall settings on the ip level for the selected interface. Table...

  • Page 185

    Wago-i/o-system 750 commissioning 185 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) click [] to apply the entry. Click [] to discard the entry..

  • Page 186

    186 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5.3 “firewall” > “mac address filter” submenu this submenu contains the settings for the mac address filter. Table 147: “firewall” > “mac address f...

  • Page 187

    Wago-i/o-system 750 commissioning 187 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5.4 “mac address filter” > “mac address filter whitelist” submenu this submenu displays all available filter entries. Table 148: “firewall” > “mac ...

  • Page 188

    188 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5.6 “firewall” > “user filter” submenu this submenu displays all available filter entries. Table 150: “firewall” > “user filter” submenu menu item ...

  • Page 189

    Wago-i/o-system 750 commissioning 189 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.5.7 “user filter” > “add new / no (n)” submenu in this submenu, you can create, change or delete filter entries. Table 151: “firewall” > “user filt...

  • Page 190

    190 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.6 “clock” menu this menu contains other submenus for the date and time settings. Table 152: “clock” menu menu item submenu item / explanation 0. Ba...

  • Page 191

    Wago-i/o-system 750 commissioning 191 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.7 “administration” menu this menu contains settings for controller administration. Table 153: “administration” menu menu item submenu item / explan...

  • Page 192

    192 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.7.1 “administration” > “create image” submenu this submenu contains the selection for creating the image. In addition to the menu item for the enab...

  • Page 193

    Wago-i/o-system 750 commissioning 193 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.8 “package server” menu this menu contains other submenus with functions for firmware backup and restore, as well as information and setting option...

  • Page 194

    194 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.8.2 “firmware backup” > “auto update feature” submenu this submenu contains a setting option for the auto update function. The submenu only appears...

  • Page 195

    Wago-i/o-system 750 commissioning 195 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.8.4 “package server” > “firmware restore” submenu this submenu contains a selection option for the restore source drive. In addition to the enabled...

  • Page 196

    196 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.8.6 “package server” > “system partition” submenu this submenu contains information and setting options for the current system partition. Table 162...

  • Page 197

    Wago-i/o-system 750 commissioning 197 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.9 “mass storage” menu this menu contains information on the internal flash memory and, if inserted, on the external memory card. In addition to the...

  • Page 198

    198 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.10 “software uploads” menu this menu contains choices and settings for the device update. You can select fieldbus software, program licenses and up...

  • Page 199

    Wago-i/o-system 750 commissioning 199 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11 “ports and services” menu this submenu contains other submenus with settings for the respective services. Table 165: “ports and services” menu m...

  • Page 200

    200 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.1 “ports and services” > “telnet” submenu this submenu contains the settings for the telnet service. Table 166: “ports and services” > “telnet” ...

  • Page 201

    Wago-i/o-system 750 commissioning 201 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.3 “ports and services” > “ftps” submenu this submenu contains the settings for the ftps service. Table 168: “ports and services” > “ftps” submen...

  • Page 202

    202 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.5 “ports and services” > “https” submenu this submenu contains the settings for the https service. Table 170: “ports and services” > “https” sub...

  • Page 203

    Wago-i/o-system 750 commissioning 203 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.7 “ports and services” > “ssh” submenu this submenu contains the settings for the ssh service. Table 172: “ports and services” > “ssh” submenu m...

  • Page 204

    204 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.9 “ports and services” > “dhcpd” submenu this submenu contains the settings for the dhcpd service. Table 174: “ports and services” > “dhcpd” sub...

  • Page 205

    Wago-i/o-system 750 commissioning 205 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.11 “ports and services” > “dns” submenu this submenu contains the settings for the dns service. Table 176: “ports and services” > “dns” submenu ...

  • Page 206

    206 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.12 “ports and services” > “iocheck port” submenu this submenu contains settings for the wago-i/o-check port. Table 177: “ports and services” > “...

  • Page 207

    Wago-i/o-system 750 commissioning 207 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.14 “ports and services” > “modbus udp” submenu this submenu contains the settings for the modbus udp service. Table 179: “ports and services” > ...

  • Page 208

    208 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.16 “plc runtime services” > “codesys 2” submenu this submenu contains the settings for the codesys 2 service. Table 181: “ports and services” > ...

  • Page 209

    Wago-i/o-system 750 commissioning 209 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.17 “plc runtime services” > “e!Runtime” submenu this submenu contains the settings for the e!Runtime service. Table 182: “ports and services” > ...

  • Page 210

    210 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.11.18 “…” > “firewall status” submenu this submenu contains firewall settings for the selected service. Table 183: “ports and services” > “firewall...

  • Page 211

    Wago-i/o-system 750 commissioning 211 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.12 “snmp” menu this menu contains other submenus with the snmp settings. Table 184: “snmp” menu parameters explanation 0. Back to … back to the hig...

  • Page 212

    212 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.12.2 “snmp” > “snmp v1/v2c manager configuration” submenu this submenu contains the snmp v1/v2c manager settings. Table 186: “snmp” > “snmp v1/v2c ...

  • Page 213

    Wago-i/o-system 750 commissioning 213 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.12.4 “snmp” > “snmp v3 configuration” submenu this submenu contains settings for snmp v3. Table 188: “snmp” > “snmp v3 configuration” submenu param...

  • Page 214

    214 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.4.12.5 “snmp” > “(secure)snmp firewalling” submenu these submenus contain the snmp firewall settings. Table 189: “snmp” > “(secure )snmp firewalling”...

  • Page 215: 7.8.5

    Wago-i/o-system 750 commissioning 215 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.5 configuration using “wago ethernet settings” the “wago ethernet settings” program enables you to read system information about your controller, mak...

  • Page 216

    216 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 46: “wago ethernet settings” – communication link once you have configured “wago ethernet settings” and have clicked [ok], connection to the contr...

  • Page 217

    Wago-i/o-system 750 commissioning 217 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.5.1 identification tab an overview of the connected device is given here. Besides some fixed values — e.G., item no., mac address and firmware versio...

  • Page 218

    218 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.5.2 network tab this tab is used to configure network settings. Values can be changed in the “input” column, while the parameters in use are shown in...

  • Page 219

    Wago-i/o-system 750 commissioning 219 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) this name is composed of the string “pfcx00” and the last three bytes of the mac address. This standard value is also used whenever the chosen name in th...

  • Page 220

    220 commissioning wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.5.3 protocol tab figure 49: “wago ethernet settings” – protocol tab you can enable or disable the web server..

  • Page 221

    Wago-i/o-system 750 commissioning 221 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 7.8.5.4 status tab figure 50: “wago ethernet settings” – status tab general information about the controller status is displayed here. The bus extension ...

  • Page 222: 8.1

    222 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8 run-time system codesys 2.3 8.1 installing the codesys 2.3 programming system the wago target files must also be included for the install...

  • Page 223

    Wago-i/o-system 750 run-time system codesys 2.3 223 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3. Click on [ok]. The “target system settings” configuration window then opens. Figure 51: target system settings (1) 4. To accept the defa...

  • Page 224: 8.2.3

    224 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5. In this “new component” window create a new program function block. In the example shown here, the new function block “plc_prg” is creat...

  • Page 225

    Wago-i/o-system 750 run-time system codesys 2.3 225 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 55: “resources” tab 2. In the left window double-click on “plc configuration”. The plc configuration for the controller opens..

  • Page 226

    226 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3. Right-click on the entry “k-bus[fix]” and then select “edit” in the contextual menu. The “configuration” dialog window then opens. Figur...

  • Page 227

    Wago-i/o-system 750 run-time system codesys 2.3 227 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 5. Wago-i/o-check is started. Figure 58: wago-i/o-check – starting screen 6. To connect to the controller and read in the module configurat...

  • Page 228

    228 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8. The detected i/o modules then appear in the configuration window. Passive i/o modules remember that passive i/o modules, such as a power...

  • Page 229

    Wago-i/o-system 750 run-time system codesys 2.3 229 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10. You can select a module in the new “module selection” window that then appears. Figure 61: “module selection” window 11. You can change...

  • Page 230

    230 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 13. To close the i/o configurator, click [ok]. 14. The individual inputs and outputs of the selected i/o module are displayed in the right ...

  • Page 231: 8.2.4

    Wago-i/o-system 750 run-time system codesys 2.3 231 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.2.4 editing the program function block to edit the plc_prg program function block, go to the “function block” tab and double-click on the...

  • Page 232

    232 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4. Repeat step 2 for the “input_1” variable. Figure 67: example of an allocation 5. To compile, click on project > compile all in the menu ...

  • Page 233: 8.2.5

    Wago-i/o-system 750 run-time system codesys 2.3 233 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.2.5 loading and running the plc program in the fieldbus controller (ethernet) requirement: - the simulation is deactivated ( online > sim...

  • Page 234

    234 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3. In the “name” field enter a designation for your fieldbus controller and then click on “tcp/ip (level 2 route)”. Then click [ok]. Figure...

  • Page 235: 8.2.6

    Wago-i/o-system 750 run-time system codesys 2.3 235 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.2.6 creating a boot project create a boot project to ensure that the plc program starts automatically again after a fieldbus controller r...

  • Page 236: 8.4

    236 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) enter the character string of the absolute address without empty spaces. The first bit of a word has an address of 0. 8.4 creating tasks se...

  • Page 237

    Wago-i/o-system 750 run-time system codesys 2.3 237 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 3. To assign a new name to the task (e.G. Plc_prog), click on “new task”. Then select the type of task. In this example, this is the “cycli...

  • Page 238

    238 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 4. Add the program module plc_prg that you have just created (see section “editing the program modules”). To do this, right-clock on the “c...

  • Page 239: 8.4.1

    Wago-i/o-system 750 run-time system codesys 2.3 239 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.4.1 cyclic tasks you can assign a priority for each task in order to establish the task processing sequence. Figure 74: cyclic task order...

  • Page 240: 8.4.2

    240 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) … 31. These tasks all receive the same computing time from the operating system (“completely fair scheduler” procedure). 8.4.2 freewheeling...

  • Page 241

    Wago-i/o-system 750 run-time system codesys 2.3 241 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 76: debugging (case 1) figure 77: debugging (case 2).

  • Page 242

    242 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) if the mode selector switch and the stop function of the user interface are used simultaneously, the mode selector switch has priority (cas...

  • Page 243

    Wago-i/o-system 750 run-time system codesys 2.3 243 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) as soon as a task is located at a breakpoint, only all other tasks can be controlled with the mode selector switch. Exception: if the mode ...

  • Page 244: 8.5

    244 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) if a task is at a breakpoint and the connection to the ide is broken (e.G., by logging out), all breakpoints are deleted. The debug task st...

  • Page 245

    Wago-i/o-system 750 run-time system codesys 2.3 245 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 83: codesys – system events do not set debug points in the event handlers! Debug points in event handlers can lead to unforeseeable ...

  • Page 246

    246 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the following events can be activated: table 191: events name description start the event is called directly after the user program starts....

  • Page 247: 8.5.1

    Wago-i/o-system 750 run-time system codesys 2.3 247 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.5.1 creating an event handler the example here is provided to illustrate how to define and use an event handler. The event handler “excpt...

  • Page 248

    248 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 86: codesys – new module has been generated handling for the event that has occurred is now programmed in this new function. In the ...

  • Page 249: 8.6

    Wago-i/o-system 750 run-time system codesys 2.3 249 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 88: codesys – variable contents prior to division by “0” figure 89: codesys – variable contents after division by “0” and call-up of...

  • Page 250

    250 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the pfc variables, the bit memory address area and the slaves attached to the fieldbus. Figure 90: process image.

  • Page 251: 8.6.1

    Wago-i/o-system 750 run-time system codesys 2.3 251 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 91: flag area 8.6.1 process images for i/o modules connected to the controller after starting the fieldbus controller, it automatica...

  • Page 252: 8.6.2

    252 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) i/o module data width the data width of an i/o module is between 0 and 48 bytes. I/o module process data check the i/o module process data ...

  • Page 253

    Wago-i/o-system 750 run-time system codesys 2.3 253 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 193: access to the process images of the input and output data – modbus memory area description access via plc logical address space ...

  • Page 254: 8.8

    254 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 196: access to the process images of the input and output data – flags memory area description access via plc logical address space f...

  • Page 255: 8.9

    Wago-i/o-system 750 run-time system codesys 2.3 255 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 198: addressing example i/o module input data output data description type c * 3 %qx4.2 occupies the first 4 words of the output proc...

  • Page 256

    256 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) internal data bus and the output values are also set at the module after each codesys task. Figure 92: internal data bus synchronization 01...

  • Page 257: 8.9.2

    Wago-i/o-system 750 run-time system codesys 2.3 257 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.9.2 case 2: codesys task interval smaller than twice the internal data bus cycle execution of the internal data bus is synchronized with ...

  • Page 258: 8.9.3

    258 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.9.3 case 3: codesys task interval greater than twice the internal data bus cycle the i/o data from the internal data bus are refreshed on...

  • Page 259: 8.9.4

    Wago-i/o-system 750 run-time system codesys 2.3 259 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.9.4 case 4: codesys task interval greater than 10 ms synchronization takes place as in case 3; however, the output modules would be reset...

  • Page 260: 8.9.5

    260 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.9.5 internal data bus configuration figure 96: internal data bus settings.

  • Page 261

    Wago-i/o-system 750 run-time system codesys 2.3 261 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 199: internal data bus settings parameter explanation update mode the update mode is used to configure how the internal data bus proc...

  • Page 262: 8.10.1  Program Memory

    262 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.9.5.1.2 synchronous update mode in the synchronous update mode the runtime behavior of codesys tasks can be influenced by the internal da...

  • Page 263

    Wago-i/o-system 750 run-time system codesys 2.3 263 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 97: program memory (example).

  • Page 264

    264 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.10.2 data memory and function block limitation the data memory is set for 64 mbytes in the controller's initial state. This set value has...

  • Page 265: 8.10.3  Remanent Memory

    Wago-i/o-system 750 run-time system codesys 2.3 265 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.10.3 remanent memory a total of 128 kbytes of remanent memory is available for the iec-61131 application. The remanent section is subdivi...

  • Page 266

    266 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.11 general target system settings figure 101: general target system settings no change to the settings is necessary on the “general” tab....

  • Page 267

    Wago-i/o-system 750 run-time system codesys 2.3 267 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 102: selecting the visualization technique in the target system settings.

  • Page 268

    268 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 2. Generate a start page for the visualization. Right-click the “visualization” folder in the “visualization” tab. Select add object ... Fr...

  • Page 269

    Wago-i/o-system 750 run-time system codesys 2.3 269 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) frequently asked questions additional information (faqs) on codesys web visualization is also provided in the section “frequently asked que...

  • Page 270

    270 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) processor time make sure when configuring tasks, that there is sufficient processor time available for all processes. Network load the cont...

  • Page 271

    Wago-i/o-system 750 run-time system codesys 2.3 271 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.12.2 eliminating errors in codesys web visualization if you are experiencing problems when working with the codesys web visualization, us...

  • Page 272

    272 run-time system codesys 2.3 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 8.12.3 faqs about codesys web visualization how can i optimize the applet for special screen resolutions? In order to optimize the web visu...

  • Page 273

    Wago-i/o-system 750 run-time system codesys 2.3 273 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) why does the visualization element “trend” in the web visualization only work “online”? The following settings must be selected for visuali...

  • Page 274: 9.1

    274 e!Runtime runtime environment wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 9 e!Runtime runtime environment 9.1 general notes additional information information on the installation and startup of e!Cockpit is prov...

  • Page 275: 9.2

    Wago-i/o-system 750 e!Runtime runtime environment 275 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 9.2 codesys v3 priorities a list of priorities implemented for the controller is provided below as supplementary information to the codes...

  • Page 276: 9.3

    276 e!Runtime runtime environment wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 9.3 memory spaces under e!Runtime the memory spaces in the controller under e!Runtime have the following sizes: • program and data memory...

  • Page 277: Modbus – Codesys 2

    Wago-i/o-system 750 modbus – codesys 2 277 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10 modbus – codesys 2 10.1 general modbus is a non-vendor-specific, open fieldbus standard for a wide range of applications in production and proces...

  • Page 278: 10.3  Configuration

    278 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.3 configuration all of the modbus operating modes are configured using the codesys plc configuration. Figure 105: codesys plc configuration - mod...

  • Page 279: 10.3.1  Modbus Settings

    Wago-i/o-system 750 modbus – codesys 2 279 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.3.1 modbus settings the “modbus settings” group contains the following configuration parameters. Table 202: modbus settings parameters explanatio...

  • Page 280

    280 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.3.2 modbus tcp settings the “modbus tcp settings” contains the following configuration parameters for the “modbus tcp” mode: table 203: modbus tc...

  • Page 281

    Wago-i/o-system 750 modbus – codesys 2 281 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 205: modbus rtu settings parameters explanation rtu mode enable for the modbus rtu mode off * operation not permitted active operation possibl...

  • Page 282

    282 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 205: modbus rtu settings parameters explanation flow control data flow control (supported only for the setting “rs-232” for the physical inter...

  • Page 283: 10.4  Data Exchange

    Wago-i/o-system 750 modbus – codesys 2 283 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4 data exchange modbus data exchange is performed in cycles or acyclically using modbus services. The type and number of usable modbus services d...

  • Page 284: 10.4.1  Process Image

    284 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.1 process image the main data interfaces between the plc and the modbus slave are the local modbus process images in the plc address area based...

  • Page 285: 10.4.2  Flag Area

    Wago-i/o-system 750 modbus – codesys 2 285 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.2 flag area modbus can also exchange data and fieldbus variables with the plc via the flag area. Caution is urged, however, when using data and...

  • Page 286: 10.4.3  Modbus Registers

    286 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.3 modbus registers wago-specific registers are implemented in the last modbus-relevant address area; this simplifies the reading of certain sys...

  • Page 287

    Wago-i/o-system 750 modbus – codesys 2 287 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.4.2 modbus mapping for write bit services fc5, fc15 the table below outlines the mapping for the modbus-writing, bit-oriented services: • fc5 –...

  • Page 288

    288 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.4.3 modbus mapping for read register services fc3, fc4, fc23 the table below outlines the mapping for the modbus-reading, register-oriented ser...

  • Page 289

    Wago-i/o-system 750 modbus – codesys 2 289 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 208: modbus mapping for read register services fc3, fc4, fc23 modbus address (hexadecimal values in parentheses) iec 61131 address description...

  • Page 290

    290 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.4.4.4 modbus mapping for write register services fc6, fc16, fc22, fc23 the table below outlines the mapping for modbus-writing, register-oriented...

  • Page 291

    Wago-i/o-system 750 modbus – codesys 2 291 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 209: modbus mapping for write register services fc6, fc16, fc22, fc23 modbus address (hexadecimal values in parentheses) iec 61131 address des...

  • Page 292

    292 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.5 wago modbus registers system and modbus data can be read and some modbus parameters configured using the wago modbus registers. The following t...

  • Page 293

    Wago-i/o-system 750 modbus – codesys 2 293 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 210: wago modbus registers modbus address data length in words access description dec. Hex. 8197 0x2005 1 ro 0x7fff (constant) 8198 0x2006 1 r...

  • Page 294

    294 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.5.2 network configuration 10.5.2.1 register 0x1028 – ip configuration this register contains information about the set ip configuration. Possible...

  • Page 295: 10.5.4  Modbus Watchdog

    Wago-i/o-system 750 modbus – codesys 2 295 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.5.3 plc status register register 0x1040 provides the status (state) that the controller is currently in. Possible values: 1 = plc running − plc s...

  • Page 296

    296 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 109: state diagram, alternative_watchdog operation mode the state diagram for the alternative_watchdog operation mode shows that the watchdog...

  • Page 297

    Wago-i/o-system 750 modbus – codesys 2 297 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 110: state diagram, switchover operation mode 10.5.4.1 register 0x1100 – watchdog command this register receives commands for the modbus watc...

  • Page 298

    298 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 211: watchdog commands value name explanation 0x5555 watchdog_ start starts the configured watchdog; in the watchdog_unconfigured state if no ...

  • Page 299

    Wago-i/o-system 750 modbus – codesys 2 299 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.5.4.2 register 0x1101 – watchdog status this register provides the current state of the modbus watchdog. The following states are possible: table...

  • Page 300

    300 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the register can be read and written in the states watchdog_unconfigured, watchdog_stopped and watchdog_expired. However, if the watchdog is active ...

  • Page 301

    Wago-i/o-system 750 modbus – codesys 2 301 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 214: watchdog operation modes value name explanation 0x0000 standard_ watchdog “standard watchdog” operation mode; the watchdog must be contro...

  • Page 302

    302 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.5.6.5 register 0x2013 – major firmware version this register provides the major part for the firmware version. 10.5.6.6 register 0x2014 – minor f...

  • Page 303: 10.6  Diagnostics

    Wago-i/o-system 750 modbus – codesys 2 303 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 10.6 diagnostics 10.6.1 diagnostics for the modbus master the status of the plc, or of the control system, can be queried by the modbus master by re...

  • Page 304

    304 modbus – codesys 2 wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 215: diagnostics for the error server diagnostics id diagnostic text method of saving explanation 0x00090006 modbus slave udp start failed per...

  • Page 305

    Wago-i/o-system 750 modbus – codesys 2 305 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 215: diagnostics for the error server diagnostics id diagnostic text method of saving explanation 0x00090108 modbus slave rtu configuration in...

  • Page 306: Modbus – E!runtime

    306 modbus – e!Runtime wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11 modbus – e!Runtime 11.1 modbus address overview figure 111: modbus address overview.

  • Page 307: 11.2  Modbus Registers

    Wago-i/o-system 750 modbus – e!Runtime 307 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2 modbus registers table 216: wago modbus registers modbus address data length in words access description dec. Hex. Watchdog configuration regis...

  • Page 308

    308 modbus – e!Runtime wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 216: wago modbus registers modbus address data length in words access description dec. Hex. 64,069 0xfa45 1 ro number of output registers, dig...

  • Page 309: 11.2.1  Modbus Watchdog

    Wago-i/o-system 750 modbus – e!Runtime 309 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.1 modbus watchdog the modbus watchdog monitors in the modbus slave the ongoing modbus communication with the modbus master. All valid modbus re...

  • Page 310

    310 modbus – e!Runtime wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 113: state diagram, simple_watchdog operation mode the state diagram for the simple_watchdog operation mode shows that the watchdog is always...

  • Page 311

    Wago-i/o-system 750 modbus – e!Runtime 311 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.1.1 register 0xfa00 – watchdog command this register receives commands for the modbus watchdog. It cannot be read, i.E. It is not possible to r...

  • Page 312

    312 modbus – e!Runtime wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.1.2 register 0xfa01 – watchdog timeout this register contains the value for the watchdog timeout. The step width is 1 ms and the maximum value ...

  • Page 313

    Wago-i/o-system 750 modbus – e!Runtime 313 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.1.4 register 0xfa03 – watchdog config this register contains the configuration parameters for the watchdog. The register is organized in bits, ...

  • Page 314

    314 modbus – e!Runtime wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 219: watchdog configuration bit name/bit identifier explanation *default setting the individual options are activated if the relevant bit or b...

  • Page 315: 11.2.2  Status Registers

    Wago-i/o-system 750 modbus – e!Runtime 315 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.2 status registers 11.2.2.1 plc status register the register 0xfa0d supplies the current status of the controller. Possible values: 1 = plc sto...

  • Page 316: 11.2.7  Live Register

    316 modbus – e!Runtime wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.2.6 constant registers registers 0xfaa0 … 0xfaa2 provide constants based on the “wago modbus registers” table. It is possible to read all of the ...

  • Page 317

    Wago-i/o-system 750 modbus – e!Runtime 317 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 11.3 estimating the modbus master cpu load due to the real-time characteristics of the linux ® kernel used, many data points can generate many conte...

  • Page 318: Diagnostics

    318 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12 diagnostics 12.1 operating and status messages the following tables contain descriptions of all operating and status messages for the controller which a...

  • Page 319

    Wago-i/o-system 750 diagnostics 319 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12.1.2 mobile radio network status indicators figure 116: mobile radio network status indicators table 223: legend for the “mobile radio network status ind...

  • Page 320

    320 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12.1.3 fieldbus/system indicating elements figure 117: indicating elements for fieldbus/system table 225: diagnostics via sys led status explanation remedy...

  • Page 321

    Wago-i/o-system 750 diagnostics 321 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the run led indication depends on the runtime system enabled (codesys 2 or e!Runtime). The following indications apply to the codesys 2 runtime system: tab...

  • Page 322

    322 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the following indications apply to the e!Runtime runtime system: table 227: run led diagnostics – e!Runtime status explanation remedy green applications lo...

  • Page 323

    Wago-i/o-system 750 diagnostics 323 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 228: diagnostics i/o led status explanation solution green data cycle on the internal data bus, normal operating status. --- orange flashing startup ...

  • Page 324

    324 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 229: ms-led diagnostics status explanation remedy off no error --- red flashing (flashing sequence) a configuration error exists. An explanation of t...

  • Page 325

    Wago-i/o-system 750 diagnostics 325 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 230: diagnostics via net led status explanation remedy green 3g network --- orange 2g network --- red no network - check the sim status via wbm. - en...

  • Page 326

    326 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 231: diagnostics via signal quality leds status of signal quality leds signal quality ▐ (s1) █ (s2) ▐█ (s3) ██ (s4) ▐██ (s5) off off off off off no n...

  • Page 327: 12.2.1  Flashing Sequences

    Wago-i/o-system 750 diagnostics 327 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12.2 diagnostics messages via flashing sequences 12.2.1 flashing sequences a diagnosis (fault/error) is always displayed as three flashing sequences in a c...

  • Page 328

    328 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 118: flashing sequence process diagram.

  • Page 329: Sequence

    Wago-i/o-system 750 diagnostics 329 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12.2.2 example of a diagnostics message indicated by a flashing sequence the example below illustrates the representation of a diagnostics message via a fl...

  • Page 330: Troubleshooting

    330 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12.2.3 meaning of blink codes and procedures for troubleshooting this section describes the diagnostics presented as blink codes via the i/o leds. If the d...

  • Page 331

    Wago-i/o-system 750 diagnostics 331 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 234: error code 1, explanation of blink codes and procedures for troubleshooting error argument cause remedy - invalid parameter checksum for interna...

  • Page 332

    332 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 234: error code 1, explanation of blink codes and procedures for troubleshooting error argument cause remedy 7 error occurred while writing to the se...

  • Page 333

    Wago-i/o-system 750 diagnostics 333 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 236: error code 3, explanation of blink codes and procedures for troubleshooting error argument cause solution -- internal data bus communication err...

  • Page 334

    334 diagnostics wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 237: error code 4, explanation of blink codes and procedures for troubleshooting error argument cause solution -- maximum permissible number of i/o m...

  • Page 335: Troubleshooting

    Wago-i/o-system 750 diagnostics 335 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 12.2.4 meaning of blink codes and procedures for troubleshooting this section describes the diagnostics presented as blink codes via the ms leds. If the di...

  • Page 336: Service

    336 service wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 13 service 13.1 inserting and removing the memory card 13.1.1 inserting the memory card 1. Use an actuating tool or a screwdriver to open the transparent cover...

  • Page 337

    Wago-i/o-system 750 service 337 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 6. Close the cover flap by flipping it down and pushing it in until it snaps into place..

  • Page 338

    338 service wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 13.2 inserting and removing the sim card 13.2.1 inserting the sim card 1. Press the release button of the sim card slot with an appropriate object (e.G., pen o...

  • Page 339: 13.3  Firmware Changes

    Wago-i/o-system 750 service 339 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 13.3 firmware changes obtain documentation appropriate for the firmware target version! A firmware upgrade or downgrade can modify, remove or add controller pr...

  • Page 340

    340 service wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 13.3.2 perform firmware downgrade do not switch the controller off! The controller can be damaged by interrupting the downgrade process. Do not switch the cont...

  • Page 341: 13.3.3  Factory Reset

    Wago-i/o-system 750 service 341 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 13.3.3 factory reset do not switch the controller off! The controller can be damaged by interrupting the factory reset process. Do not switch the controller of...

  • Page 342: Removal

    342 removal wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 14 removal risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. Handle the i/o module carefully to prevent injury. 14.1 removi...

  • Page 343

    Wago-i/o-system 750 removal 343 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 14.1.2 removing the i/o module 1. Remove the i/o module from the assembly by pulling the release tab. Figure 122: removing the i/o module (example) electrical ...

  • Page 344: Appendix

    344 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15 appendix 15.1 structure of process data for the i/o modules the process image for the i/o modules on the internal data bus is built up word- by-word in the...

  • Page 345

    Wago-i/o-system 750 appendix 345 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.1 digital input modules digital input modules supply one bit of data per channel to specify the signal state for the corresponding channel. These bits ar...

  • Page 346

    346 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.1.4 2 channel digital input module with diagnostics and output process data 750-418, 753-418 the digital input module supplies a diagnostic and acknowled...

  • Page 347

    Wago-i/o-system 750 appendix 347 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.1.7 8 channel digital input module ptc with diagnostics and output process data 750-1425 the digital input module ptc provides via one logical channel 2 ...

  • Page 348

    348 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.2 digital output modules digital output modules use one bit of data per channel to control the output of the corresponding channel. These bits are mapped...

  • Page 349

    Wago-i/o-system 750 appendix 349 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.2.3 2 channel digital input modules with diagnostics and input process data 750-507 (-508), -522, 753-507 the digital output modules have a diagnostic bi...

  • Page 350

    350 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.2.4 4 channel digital output modules 750-504, -516, -519, -531, 753-504, -516, -531, -540 table 254: 4 channel digital output modules output process imag...

  • Page 351

    Wago-i/o-system 750 appendix 351 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.2.7 8 channel digital output modules with diagnostics and input process data 750-537 the digital output modules have a diagnostic bit for each output cha...

  • Page 352

    352 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.2.9 8 channel digital input/output modules 750-1502, -1506 table 259: 8 channel digital input/output modules input process image bit 7 bit 6 bit 5 bit 4 ...

  • Page 353

    Wago-i/o-system 750 appendix 353 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.3 analog input modules the analog input modules provide 16-bit measured data and 8 control/status bits per channel. The controller only uses the 8 contro...

  • Page 354

    354 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.3.3 4 channel analog input modules 750-450, -453, -455, -457, -459, -460, -468, (and all variations), 753-453, -455, -457, -459 table 262: 4 channel anal...

  • Page 355

    Wago-i/o-system 750 appendix 355 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.3.4 3-phase power measurement module 750-493 the above analog input modules have a total of 9 bytes of user data in both the input and output process ima...

  • Page 356

    356 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.4 analog output modules the analog output modules provide 16-bit output values and 8 control/status bits per channel. The controller only uses the 8 cont...

  • Page 357: 15.1.5  Specialty Modules

    Wago-i/o-system 750 appendix 357 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.5 specialty modules wago has a host of specialty i/o modules that perform various functions. With individual modules beside the data bytes also the contr...

  • Page 358

    358 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 750-404/000-005 the above counter modules have a total of 5 bytes of user data in both the input and output process image (4 bytes of counter data and 1 byte ...

  • Page 359

    Wago-i/o-system 750 appendix 359 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.5.2 pulse width modules 750-511, (and all variations /xxx-xxx) the above pulse width modules have a total of 6 bytes of user data in both the input and o...

  • Page 360

    360 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.5.4 serial interface modules with standard data format 750-650/000-001, -014, -015, -016 750-653/000-001, -006 the above serial interface modules with st...

  • Page 361

    Wago-i/o-system 750 appendix 361 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the above ssi transmitter interface modules have a total of 4 bytes of user data in the input process image, which has 2 words mapped into the image. Word ali...

  • Page 362

    362 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 276: incremental encoder interface modules 750-634 input process image offset byte destination description high byte low byte 0 - s not used status byte...

  • Page 363

    Wago-i/o-system 750 appendix 363 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 750-635, 753-635 the above digital pulse interface module has a total of 4 bytes of user data in both the input and output process image (3 bytes of module da...

  • Page 364

    364 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) output process image offset byte destination description high byte low byte 0 c1 c0 control byte c1 control byte c0 1 d1 d0 setpoint position setpoint positio...

  • Page 365

    Wago-i/o-system 750 appendix 365 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) output process image offset byte destination description high byte low byte 0 reserved c0 reserved control byte c0 1 d1 d0 process data*) / mailbox**) 2 d3 d2...

  • Page 366

    366 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) output process image offset byte destination description high byte low byte 0 d0 c dali command, dsi dimming value control byte 1 d2 d1 parameter 2 dali addre...

  • Page 367

    Wago-i/o-system 750 appendix 367 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 283: overview of input process image in the "easy" mode input process image offset byte designation note high byte low byte 0 - s res. Status, activate ...

  • Page 368

    368 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) long: dimming, darker bit pairs ga1 … ga15 similar to ga0. 11 bit 8…15 bit 0…7 switch scene 0…15 da = dali address ga = group address 15.1.5.13 lon ® ftt modu...

  • Page 369

    Wago-i/o-system 750 appendix 369 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 286: mp bus master module 750-643 input and output process image offset byte destination description high byte low byte 0 c1/s1 c0/s0 extended control/ ...

  • Page 370

    370 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.5.17 vibration velocity/bearing condition monitoring vib i/o 750-645 the vibration velocity/bearing condition monitoring vib i/o has a total of 12 bytes ...

  • Page 371

    Wago-i/o-system 750 appendix 371 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 289: knx/eib/tp1 module 753-646 input process image offset byte destination description high byte low byte 0 - s0 not used status byte 1 s1 op extended ...

  • Page 372

    372 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) in the operating mode with suppressible mailbox (mode 2), the mailbox and the cyclical process data are mapped next. The following words contain the remaining...

  • Page 373: 15.1.6  System Modules

    Wago-i/o-system 750 appendix 373 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.1.6 system modules 15.1.6.1 system modules with diagnostics 750-610, -611 the modules provide 2 bits of diagnostics in the input process image for monitori...

  • Page 374: 15.2.1  General Libraries

    374 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.2 codesys 2 libraries additional functions for the controller 750-8207are provided using libraries. 15.2.1 general libraries this section contains general ...

  • Page 375

    Wago-i/o-system 750 appendix 375 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 293: codesys system libraries library function c/iec 61131 systaskinfo.Lib evaluation of task information in the online mode iec 61131 util.Lib various ...

  • Page 376

    376 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) ensure that files are saved! Files are not reliably saved on the data medium until you call up the “sysfileclose” function block! Additional information about...

  • Page 377

    Wago-i/o-system 750 appendix 377 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) - sysfilewriteasync ensure that files are saved! Files are not reliably saved to the data medium until you call up the “sysfilecloseasync” function block. Add...

  • Page 378

    378 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.2.1.6 busdiag.Lib the controller 750-8207 supports the following function blocks of the “busdiag.Lib” library: - diaggetbusstate - diaggetstate the documen...

  • Page 379

    Wago-i/o-system 750 appendix 379 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) 15.2.1.9 wagoconfigtoollib.Lib the following table shows call-ups that allow you to configure and parameterize the controller from the plc program or linux ® ...

  • Page 380

    380 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 298: description of the configuration scripts for “codesys” parameters status call output/input effecti ve information codesys webserver version read ge...

  • Page 381

    Wago-i/o-system 750 appendix 381 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 299: description of the configuration scripts for “networking - host/domain name” parameters status call output/input effecti ve host name host name rea...

  • Page 382

    382 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 300: description of the configuration scripts for “networking - tcp/ip” parameters status call output/input effecti ve default gateway 1 default gateway...

  • Page 383

    Wago-i/o-system 750 appendix 383 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 301: description of the configuration scripts for “networking - ethernet” parameters status call-up output/input effective switch configuration interfac...

  • Page 384

    384 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 302: description of the configuration scripts for “ntp” parameters status call output/input effecti ve configuration data state read get_ntp_config stat...

  • Page 385

    Wago-i/o-system 750 appendix 385 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 303: description of the configuration scripts for “clock” parameters status call-up output/input effective clock time and date date on device, local rea...

  • Page 386

    386 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 304: description of the configuration scripts for "administration" parameters status call output/input effecti ve configuration of service interface con...

  • Page 387

    Wago-i/o-system 750 appendix 387 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 306: description of configuration scripts for “ports and services” – “network services parameters status call-up output/input valid network services tel...

  • Page 388

    388 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 307: description of configuration scripts for “ports and services” – “plc runtime services” parameters status call output/input effecti ve general setti...

  • Page 389

    Wago-i/o-system 750 appendix 389 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 307: description of configuration scripts for “ports and services” – “plc runtime services” parameters status call output/input effecti ve codesys 2 set...

  • Page 390

    390 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 307: description of configuration scripts for “ports and services” – “plc runtime services” parameters status call output/input effecti ve e!Runtime set...

  • Page 391

    Wago-i/o-system 750 appendix 391 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 308: description of configuration scripts for “ports and services” – “ssh/tftp” parameters status call-up output/input valid ssh ssh server ssh read get...

  • Page 392

    392 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 309: description of configuration scripts for “snmp” parameters status call-up output/input valid general snmp information parameters name of device rea...

  • Page 393

    Wago-i/o-system 750 appendix 393 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 309: description of configuration scripts for “snmp” parameters status call-up output/input valid snmp trap receiver configuration for v1 and v2c any nu...

  • Page 394

    394 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 309: description of configuration scripts for “snmp” parameters status call-up output/input valid configuration of snmp v3 any number of snmp v3 users c...

  • Page 395

    Wago-i/o-system 750 appendix 395 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 309: description of configuration scripts for “snmp” parameters status call-up output/input valid add new v3- user write config_snmp v3-edit=add v3-auth...

  • Page 396

    396 appendix wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) the document containing the description of the library and the function block it includes is available for download on the internet at www.Wago.Com . 15.2.1.1...

  • Page 397

    Wago-i/o-system 750 appendix 397 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) - snmpm_set - snmpm_set_v3 the document containing a description of this library and the function blocks it includes is available for download on the internet...

  • Page 398: List Of Figures

    398 list of figures wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) list of figures figure 1: view of device .....................................................................................27 figure 2: marking area...

  • Page 399

    Wago-i/o-system 750 list of figures 399 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 48: “wago ethernet settings” – network tab ................................. 218 figure 49: “wago ethernet settings” – protocol tab ...............

  • Page 400

    400 list of figures wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) figure 96: internal data bus settings ............................................................... 260 figure 97: program memory (example) ............

  • Page 401: List Of Tables

    Wago-i/o-system 750 list of tables 401 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) list of tables table 1: variants ................................................................................................15 table 2: number nota...

  • Page 402

    402 list of tables wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 47: wbm “plc webvisu” page – “web server configuration” group .... 110 table 48: wbm “configuration of host and domain name” page – “hostname” gro...

  • Page 403

    Wago-i/o-system 750 list of tables 403 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 81: wbm “configuration of network services” page – “https” group .. 140 table 82: wbm “configuration of network services” page – “i/o-check” group...

  • Page 404

    404 list of tables wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 109: wbm “configuration of openvpn and ipsec” page – “certificate upload” group .....................................................................

  • Page 405

    Wago-i/o-system 750 list of tables 405 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 150: “firewall” > “user filter” submenu .................................................. 188 table 151: “firewall” > “user filter” > “add new / ...

  • Page 406

    406 list of tables wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 194: access to the process images of the input and output data – canopen ............................................................................

  • Page 407

    Wago-i/o-system 750 list of tables 407 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 237: error code 4, explanation of blink codes and procedures for troubleshooting ....................................................................

  • Page 408

    408 list of tables wago-i/o-system 750 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09) table 275: incremental encoder interface modules 750-631/000-004, --010, - 011 ............................................................................

  • Page 409

    Wago-i/o-system 750 409 750-8207 pfc200 cs 2eth rs 3g manual draft version 1.2.1 from 2017-09-13, valid from fw version 02.06.20(09).

  • Page 410

    Wago kontakttechnik gmbh & co. Kg postfach 2880 • 32385 minden hansastraße 27 • 32423 minden phone: 0571/887 – 0 fax: 0571/887 – 169 e-mail: info@wago.Com internet: http://www.Wago.Com.