Waldorf RN8110GC Technical Data Sheet

Technical data sheet for

TARGET TOP GAS CONVECTION

OVEN RANGE 900mm

RN8110GC

  Heavy-duty cast iron top with removable    

 centre 

ring

  Matched modular height machined top for    

  seamless work surface 

  High output dual ring cast iron burner

  GN 2/1 gas convection oven

  Drop down door

  Stainless steel exterior

 Easy clean

 Easy service

 Fully modular

Controls

• Large easy use control knobs - heat resistant reinforced

• Easy view control settings on knobs

Target top

• Variable high to low burner control

• Single control knob for burner and pilot system

• Flame failure pilot burner

• Manual pilot ignition for reliable operation

Oven

• 50-320˚C thermostatic control 

• Indicator lights for power and heating

• Piezo ignition to pilot burner

• Flame failure 

• Fan and burner automatic off when door open  

Cleaning and Servicing  

• Removable oven racking and sole plate

• Easy clean vitreous enamel oven and door inner

• Easy clean stainless steel exterior 

• Target Top fully serviceable from front of unit

• Bottom sill removable for burner and pilot access

• Door hinge spring adjustable on unit (door outer removed)

• Door disengages for lift off removal and increased service access

• Access to all parts from front of unit

Overall Construction

• Galvanized steel chassis

• Welded hob surround with 1.5mm 304 stainless steel bull nose 

• Splashback and hob sides 1.2mm 304 stainless steel

• Front panels and oven sides 0.9mm 304 stainless steel

• 150mm legs in 63mm dia. heavy-duty 1.2mm 304 stainless steel with  

 adjustable feet

Target top

• 3 piece heavy-duty cast iron top with fully machined surface

• Top plates and removable centre with integral spill protection design

• Cast top reinforced with integral heat fins for heat zone definition

• 45MJ dual ring cast iron burner with single control

• Full pilot and flame failure protection

• 50mm thick refractory brick lined burner box for high heat retention

• 2 vitreous enamelled spill trays 

• Supplied with heavy-duty centre casting removal tool

Oven

• Fully welded and vitreous enamelled oven liner

• GN 2/1 capacity with 4 position racking

• Heavy-duty easy remove heavy wire chrome rack supports

• Cast iron even heat oven sole plate 

• 30MJ oven burner

• Pilot and flame failure with piezo ignition

• 100W heavy duty motor  

• 200mm diameter heavy-duty circulation fan 

• Welded frame drop down door with heavy-duty spring hinge system

• 0.9mm 304 stainless steel door outer

• 1.0mm press formed vitreous enamelled door inner

• High density fibreglass insulated

• Stay cool stainless steel door handle with cast metal handle mounts

• Supplied with two chrome wire oven racks