Waldorf RN8800G-B Technical Data Sheet

Technical data sheet for

GAS COOKTOPS 1200mm

RN8800G-B, RN8800G-CB, RN8800G-LS, RN8800G-RB, 

RN8803G-B, RN8803G-CB, RN8803G-LS, RN8803G-RB, 

RN8806G-B, RN8806G-CB, RN8806G-LS, RN8806G-RB, 

RN8809G-B, RN8809G-CB, RN8809G-LS, RN8809G,RB

 Heavy-duty construction

  28 MJ/hr open burners

  Flame failure standard

  Pilot burners optional  

  300mm, 600mm, and 900mm griddle plate options

  Optional Simmer plates

  3 models of base unit

  1 model of ventilated refrigeration base with    

 drawer/door 

options

  Stainless steel exterior

 Easy clean

 Easy service

 Fully modular

Overall Construction

Cooktop

• Welded hob with 1.5mm 304 stainless steel bull nose 

• Splashback and side panels 1.2mm 304 stainless steel

• Front panels 0.9mm 304 stainless steel

• Aluminised steel internal construction 

• Cast iron 28MJ/hr open burners with forged brass cap

• Vitreous enamelled cast iron potstands

• Vitreous enamelled open burner spill covers

• Cast iron simmer plates (optional extra)

• 12mm thick mild steel griddle plate

• 2.5mm 304 stainless steel griddle splash guards 

• Vitreous enamelled spill trays  

Griddle sections are standard on RH side. Available on LH side to 

order or by conversion. 

Bench mount (supplied as –B model)

• Four 63mm dia. heavy-duty 1.2mm 304 stainless steel bench legs   

 with adjustable feet

• Adjustable height 80mm – 105mm

Cabinet base (supplied as –CB model)

• Fully modular for match suite finish

• Double skin 0.9mm 304 stainless steel interior and exterior

• Optional GN 1/1  4 position racking kit (1 or 2 cabinet bays)

• Up to eight 65mm GN 1/1 capacity

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with

 adjustable feet 

Leg stand (supplied as –LS model)

• Fully modular for matched suite finish

• Framed top for connection to Cooktop 

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with

 adjustable feet

• Fully modular framed stand shelf with 0.9mm 304 stainless steel finish

• Shelf to top stainless steel backstop panel for convenience and rigidity 

• Suitable for rear or through shelf gas connection to Cooktop 

• Quick assembly design (no tools required)

Refrigerated base (supplied as –RB model)

• Self contained suite matched modular base 

• Ventilated system with R134a refrigerant

• -2˚ to + 8˚C temperature (Tropical Climate rated)

• Two GN 1/1 drawers and one door standard

• 100mm deep pan drawer capacity

• Heavy-duty European telescopic drawer guides

• Magnetic drawer gaskets (replaceable without tools)

• 50mm fully foamed CFC free insulation

• 304 stainless steel exterior and interior

• Anti-corrosion treated evaporator

• No condensate drain required

• 63mm dia. heavy-duty 1.2mm 304 stainless steel legs with

 adjustable feet 

• Condensing unit removable through front of unit for service

• Easy clean interior

Controls

Cooktop

• Variable high to low controls to open burners

• Open burners flame failure standard with pilot burners optional 

• Variable high to low controls to griddles

• Griddles standard with pilot, flame failure and piezo ignition

• Large easy use control knob - heat resistant reinforced

• Easy view control settings on knob  

Refrigerated base

• Digital control electronic thermostat

• Automatic defrost 

• Automatic evaporation of defrost water 

• -2˚ to +8˚C temperature range

Cleaning and Servicing 

• All models with easy clean stainless steel external finish

• Lift off burners heads and vitreous enamelled burner spill covers

• Vitreous enamelled spill trays under open burner and griddle sections

• Access to all parts from front of unit

• Refrigerated Base condenser removable through front of unit

RN8800G-LS