Walgreens WGNBPA-530 User instructions - page 11
20
19
1.Withthecuffwrappedaroundyourarm,pressthe
START/STOP button. Do not inflate the cuff unless it is
wrapped around your arm. All digits will light up to check
the display functions. The checking procedure will be
completed after about 3 seconds.
2. Afterallsymbolsdisappear,thedisplaywillshow
“00”. The monitor is
“Ready to Measure” and will
automatically inflate the cuff to start measurement.
3. The cuff will begin deflating as measurement continues.
Note: This monitor will re-inflate automatically if the system
detects that your body requires more pressure for
measurement.
4. Whenthemeasurementiscompleted,thecuffwill
deflate entirely. Systolic pressure, diastolic pressure
and pulse will be shown simultaneously on the LCD
screen.
The measurement is then automatically
stored into memory.
Note:
1.Thismonitorautomaticallyturnsoffapproximately
1
minute after last operation. You may also press the
START/STOP button to turn the unit off.
2.Tointerruptthemeasurement,youmaypressthe
START/STOP (recommended), “M,”
or Date & Time Set ( ) buttons. The cuff
will deflate immediately after a button is pressed.
START
STOP
M