1 copy of instruction manual ready-to-go light cube 540w, 60x60cm gewerbering 26 86666 burgheim tel. +49/84 32 / 9489-0 fax: +49/84 32 / 9489 - 8333 email: info@foto-walser.De www.Foto-walser.De.
2 content 1. How to understand this instruction manual .................................................... 4 1.1 markings on the device .......................................................................................... 4 1.2 markings in this manual .............................................
3 thank you very much for your confidence. We wish you much success and pleasure with your new device. The little details bring the big picture! With the ready-to-go light cube no problem at all, because the mobile miracle cube combines 540w bright light with a sturdy exterior on compact 60x60cm. Us...
4 1. How to understand this instruction manual 1.1 markings on the device this marking mean, that your device meets the safety requirements of all relevant european directives. This marking mean, that your device should be disposed in the local disposal points. 1.2 markings in this manual marking me...
5 warning danger of electric shock, fire through short-circuit a short-circuit could be caused through defect cables and through humidity or moisture. A short- circuit can warm up the conductors, so that there isolation will melt or even melt thoroughly. This could lead to fire. Please just use the ...
6 please just use lamps, which comply with en 60357 page 3155. 3. Unpack and check the device please unpack your device carefully. Please check, if the delivery is complete: 1x ready-to-go light cube 540w o 3x cloth background (blue, white, grey) o 1x silver cloth o 1x power cord o 2x diffusor 1 ins...
7 5. Quick-start guide advice: the detailed instruction for the following operations can be found in the respective chapters in this instruction manual. Keep the sequences of the following operation steps when using the device for the first time to avoid damages on the device. Warning please note th...
8 6.3 screw in and out of lamps warning danger of cutting and splitting through breaking or bursting lamp. Don´t let the lamps fall down. Switch off device. See switch the device on and off . Disconnect from power supply: plug out power cord. Let the device cool down. Caution! Danger of burning on l...
9 7.3 switch lamps on and off you can switch the lamps on and off through the on/off tappet switch. Switch on device: see switch the device on and off . Switch lamps on: see switch the device on and off . The lamp lights up. Switch lamps off: see switch the device on and off . The lamps go out. 8. T...
10 what you should do? Before every operation with every change check, if the lamps are screwed in firmly. In case of damage: warning! Danger of electric shock and fire through short- circuit. The device should be repaired by an electrician immediately. X 10.2 cleaning warning danger of cutting and ...
11 disconnect from power supply: unplug power cord. Open fuse holder: use a small screwdriver to lift up the fuse holder carefully and slightly. Pull out the fuse holder with your hands completely out of the slot. Take out the old micro-fuse. Slide the new micro-fuse in the fuse holder. Slide the fu...
12 colour temperature 5000-5300 k socket e14.
