1 copy of instruction manual fluorescent light 110-660w gewerbering 26 86666 burgheim tel. +49/84 32 / 9489-0 fax: +49/84 32 / 9489 - 8333 email: info@foto-walser.De www.Foto-walser.De.
2 content 1. How to understand the instruction manual .................................................... 4 1.1 markings on the device .......................................................................................... 4 1.2 markings in this manual ..............................................
3 thank you very much for your confidence. We wish you much pleasure and success with your new device. The fluorescent light is equipped with high-quality lamps and therewith particularly suitable for ambitious beginners and professional users in film and studio photography. The lamps are characteri...
4 1. How to understand the instruction manual 1.1 markings on the device this marking mean, that your device meets the safety requirements of all relevant european directives. This marking mean, that your device should be disposed in the local disposal points. Dieses zeichen bedeutet, dass sie das g...
5 warning danger of electric shock, burn hazard a short-circuit could be caused by defect cables, humidity or moisture. A short-circuit can warm up the conductors, so that there isolation will melt or even melt thoroughly. This could lead to fire. Please just use the original cables, which are inclu...
6 please just use lamps, which comply with en 60357 page 3155. 3. Unpack and check the device please unpack the delivery carefully. Please check, if the delivery is complete: 1 x fluorescent light 220 w o lamps (number depends on model – see technical data) o 1 x power cable o 1x mounting bracket/la...
7 1. Housing 2. Lamp socket 3. Locking lever tilt angle 4. Jack for power connection 5. On/off switch lamps 6. On/off switch 7. Fuse holder 8. Lamps 9. Barndoors 5. Quick-start guide advice: the detailed instruction for the following operations can be found in the respective chapters in this instruc...
8 6. Preparation for operation 6.1 mount on lamp tripod advice: please note the user information of the tripod manufacturer. Warning select a tripod of suitable weight and dimensions. See technical specifications. Make sure, that the tripod with the mounted device has a tilt and skid resistant stand...
9 7. Operation of the device warning make sure, that the lamp tripod is positioned tilt and skid resistant. 7.1 adjust tilt angle open tilt lever. Adjust the required tilt angle. Tighten tilt lever. 7.2 switch the device on and off switch on device: set main on/off tappet switch on i. The device is ...
10 9. Solve problems problem possible reason remedy device is switched on, but has no function power cord is not plugged or plugged incorrect plug in the power cord correctly micro-fuse is defect change micro-fuse, see change micro- fuse lamps do not light up lamps are switched off switch on lamps, ...
11 fluorescent light 220 w cleaning housing use a microfiber cloth to remove light and stubborn dirt lamps wipe off with dust brush or dry, soft cloth advice: don´t clean the lamps with water. Even small residues on the lamps could lead to bursting 10.3 change lamps warning please just use lamps, wh...
12 13. Disposal and environment protection your device should be disposed free of charge at the local disposal points. 14. Technical specifications device 110w 17156 220w 16846 220w 17158 330w 17159 330w 17157 440w 17160 550w 17161 660w 17162 protection class ip 20 power supply ac 220 - 230 v / 50 h...
