1. DL manuals
  2. Walimex
  3. Camera Accessories
  4. CY-A
  5. Instruction Manual

Walimex CY-A Instruction Manual

Summary of CY-A

  • Page 1

    12 12. Technical specifications receiver power supply ac 220 - 230 v / 50 hz weight approx. 185g dimensions (h x w x l) approx. 4,5 x 14,5 x 18,5 cm synchro exit 6,3 mm adapter: 3,5mm transmitter battery 12 v hot-shoe under 0,01 ma weight approx. 70g dimensions (h x w x l) approx. 3,6 x 5 x 6 cm per...

  • Page 2

    2 content 1. How to understand this instruction manual .................................. 4 1.1 markings on the device ..................................................................... 4 1.2 markings in the instruction manual ................................................... 4 2. Important saf...

  • Page 3

    10 9. Maintenance 9.1 continuous inspections what you should do? Before every operation with every change check all cables and plugs for damages in case of damage: warning! Danger of electric shock and fire through short-circuit. The device should be repaired by an electrician immediately x 9.2 clea...

  • Page 4

    4 1. How to understand the instruction manual 1.1 markings on the device this marking means, that your device meets the safety requirements of all relevant european directives. This marking means, that your device should be disposed in the local disposal points. 1.2 markings in the manual marking me...

  • Page 5

    8 see technical specifications. If the values should differ, please contact info@foto-walser.De or tel. 49 84 32 / 9489-0. 5. Connect the power cord with the socket on the device and with the power socket. 6.2 adjust frequency you have the opportunity to operate the remote trigger with 4 different f...

  • Page 6

    6 repair the device on your own. The device should only be repaired by electricians. − please follow this instruction manual for maintaining your device. − please trigger the flash head through the test button before starting any operation or maintenance arrangement. 3. Unpack and check the device 1...