1 copy of instruction manual cy-c remote trigger set gewerbering 26 86666 burgheim tel. +49 84 32 / 9489-0 fax. +49 84 32 / 9489 - 8333 email: info@foto-walser.De www.Foto-walser.De.
2 content 1. How to understand the instruction manual................................... 4 1.1 markings on the device ..................................................................... 4 1.2 markings in the manual ..................................................................... 4 2. Importan...
10 advice: just use the following specified cleaning supplies. 9.3 change batteries warning please just use batteries, which comply with the required specifications. See technical specifications . 1. Use a phillips screwdriver to loose the screw on the bottom side of the transmitter. 2. Take off the...
4 1. How to understand this instruction manual 1.1 markings on the device this marking means, that your device meets the safety requirements of all relevant european directives. This marking means, that your device should be disposed in the local disposal points. 1.2 markings in the manual marking m...
8 see technical specifications . If the values should differ, please contact info@foto-walser.De or tel. 49 84 32 / 9489-0. 5. Connect the power cord with the socket on the device and with the power socket. 6.2 connect the transmitter with the camera 1. Put the transmitter with the shoe on the flash...
6 repair the device on your own. The device should only be repaired by electricians. − please follow this instruction manual for maintaining your device. − please trigger the flash head through the test button before starting any operation or maintenance arrangement. 3. Unpack and check the device 1...
