1. DL manuals
  2. Walimex
  3. Camera Accessories
  4. Daylight 250
  5. Instruction Manual

Walimex Daylight 250 Instruction Manual

Summary of Daylight 250

  • Page 1

    16 14. Technical specifications device power supply ac 220 - 230 v / 50 hz weight approx. 1 kg vertical pivoting radius 180 ° dimensions incl. Softbox (hxwxd) approx. 60 cm x 40 cm x 49 cm accessories lamp, front diffuser, instruction manual lamp spiral daylight (energy-saving lamp), which comply to...

  • Page 2

    2 content 1. How to understand the instruction manual................................... 4 1.1 markings on the device ..................................................................... 4 1.2 markings in the manual ..................................................................... 4 2. Importan...

  • Page 3

    14 what you should do? Before every operation with every change check, if the lamp is screwed in firmly in case of damage: warning! Danger of electric shock and fire through short-circuit. The device should be repaired by an electrician immediately x check, if the softbox is mounted correctly x 10.2...

  • Page 4

    4 1. How to understand the instruction manual 1.1 markings on the device this marking mean, that your device meets the safety requirements of all relevant european directives. This marking mean, that your device should be disposed in the local disposal points. 1.2 markings in the manual marking mean...

  • Page 5

    12 7. Operation of the device 7.1 adjust tilt angle 1. Loose fastening screw for tilt lever. 2. Adjust required tilt angle. 3. Tighten fastening screw for tilt angle. 7.2 switch the device and lamp on and off the lamp can be switched on and off through the tappet switch on the power cord. 1. Switch ...

  • Page 6

    6 humidity or moisture. A short-circuit can warm up the conductors, so that there isolation will melt or even melt thoroughly. This could lead to fire. − please just use the original cables, which are included in delivery. They are aligned for your device and guarantee the necessary safety for you a...

  • Page 7

    10 warning please note the safety notes in the respective chapters throughout operation. • mount the device on tripod (optional). • mount softbox. • screw in lamp. • adjust tilt angle. • connect to power supply. • switch the lamp on and off. 6. Preparation for operation 6.1 mount on tripod (optional...

  • Page 8

    8 − please handle the lamps with care to avoid bursting. − don´t touch the lamps with bare hands. Just touch the lamp at the plastic socket or wear clean cotton gloves or use a clean cloth. − avoid touching the flash tube accidentally when mounting or changing accessories. − please just use lamps, w...