Gewerbering 26 86666 burgheim tel. +49 84 32 / 9489-0 fax. +49 84 32 / 9489 - 8333 e-mail: info@foto-walser.De www.Foto-walser.De copy of instruction manual portable ring flash set gxr-400 / gxr-600 portable flash set gxr-400 / gxr-600 flash head for gxb-400 / gxb-600 ring flash gxr-400 / gxr-600
Content 1. How to understand the instruction manual ...................................... 3 1.1. Symbols on the device ................................................................ 3 1.2. Symbols in this manual ............................................................... 4 2. Important safety...
1.2. Symbols in this manual symbol meaning indicates the handling and consequences of safety notes. Warning indicates a hazardous situation which, if not avoided, may result in a serious injury or death. Caution indicates a hazardous situation which, if not avoided, may result in minor or moderate i...
Do not operate the device with wet hands or feet. Clean the device exclusively as described in this instruction manual. Ensure that cables and conductors are not damaged. Damage could be caused due to heat impact, chemical influence or due to mechanical impacts such as rubbing, bending, tearing, rol...
Warning the powerpack contains a rechargeable ni-mh battery. Please pay attention to the safety and disposal notes in the manual and on the battery. Keep children away from the powerpack. Use exclusively the charger of the gxr/gxb series for charging the battery. Ideal environmental temperature 0-40...
4. Operation of the device 4.1. Overview of device elements walimex pro powerpack a powerpack b connecting socket for flash devices c ready display d test button e photo cell f sync socket g battery compartment with battery h acoustic signal on/off switch i output regulator j display k on/off switch...
6. Prepare powerpack for operation 6.1. Charge battery warning pay attention to the safety notes from pages 4-8. A b c d power cord 12v car cable power supply unit battery open the battery compartment lid on the powerpack. Pull the battery from the shaft of the powerpack. Connect your power supply u...
For adjusting the height please open the corresponding locking screws. Adjust the device to the desired height. Tighten the locking wheel. For adjusting the depth please open the corresponding locking screws. Adjust the device to the desired depth. Tighten the locking wheel. In order to mount the de...
Prepare flash trigger with a radio receiver note: pay attention to the user manual of the radio trigger manufacturer. Plug cable of the radio receiver into the connective socket 3.5mm for the sync cable on the device. Connect radio transmitter to hot shoe of camera. 10. Trigger flash switch on devic...
13.2. Cleaning the device warning danger of bursting flash tube ensure not to touch the flash tube accidentally with bare hands. Warning danger of electric shock use exclusively the cleaning supplies as specified. Never allow for the device to get in touch with wetness or water. Always unplug power ...
17. Technical specifications powerpack dimensions (lxwxd) approx. 25.5x17x7cm operating voltage dc 12v charging voltage 220-240v output 600w adjustment range approx. 2 f-stops, 1/1-1/4 in 9 steps flash releases up to approx. 140 (at max. Output) weight approx. 3100g radio trigger 433mhz battery dime...
