Walimex Pro 16565 Instruction Manual - Assembly
4
−
Don´t touch these parts during operation and cooling down.
−
Let the devices cool down completely before starting any mounting or maintenance
arrangements.
3.
Assembly
Step I
Plug the upper longitudinal rod 1x Rod with Spigot approx. 71cm (A) with 1x Rod with connecting
piece and spigot approx. 84cm (B) together and tighten the Allen screws. Repeat this twice.
Step II
For the lower longitudinal support plug 1x Rod approx. 99cm (D) with Rod approx. 105cm (E)
together and tighten the Allen screws. Repeat this twice.
Step III
To get the upper rectangular support, plug together the
short approx. 26cm long lateral rods (J) with the longitudinal
rods from step I. Tighten the butterfly screws. The spigots
must show upwards.
Step IV
Take the longitudinal rods from step III and plug the lateral rods
approx. 105cm (C) to the lower rectangle. Tighten the butterfly
screws.
Step V
Take the 4 Connecting Rods (F) and plug the upper rectangle support from step III with the lower
rectangle support from step IV together. Tighten the butterfly screws. Check all screw and plug
connections, if they are tightened and tighten them again if necessary.