Walimex propac p8-820 Instruction Manual - page 4
After the device has completed charging, please unplug charging cable
and power cord from the device.
Dispose of the device at your local disposal area or send it back to the
manufacturer.
Do not leave the device unsupervised while it is being charged.
Do not use the device while it is being charged.
No liability is assumed for physical injury or damage.
3.
Unpack and check Powerblock
1.
Please unpack the Powerblock carefully.
NOTE: Keep the packaging for future storage and transportation of the
Powerblock.
2.
Please check if the scope of delivery is complete:
1 Powerblock
1 power cord with mains battery charger
1 12V car cable
1 instruction manual in German and English
Note: You can order the suitable connecting cable for your compact flash via
our online shop.
3.
Please check if the scope of delivery is undamaged.
NOTE: If the scope of delivery is incomplete or damaged, please contact
info@foto-walser.de or our service hotline with the telephone number +49 (0)
8432-9489-0.
We reserve the right to make technical and optical modifications in the
course of product improvement.
4.
Overview of device elements and operating elements
A Connecting socket charge and
connecting cable
B On/off switch
C LED charge and status display
D Fixture for carrying strap
E Powerblock
F 12 V car cable
G Power cord with mains battery charger
5.
Prepare Powerblock for operation
5.1.
Connect Powerblock to the power supply for charging
WARNING! Please pay attention to the safety notes from pages 4-6
Charging process with the mains battery
charger
Plug the charging cable into the socket on the
Powerblock and connect the mains battery
charger with the power supply.
NOTE: Compare the local power network with
the
connected load of the device. If the values differ, please contact info@foto-
walser.de or tel. +49 (0) 8432-94890.
The Powerblock starts charging right away.
LED Charge lights up red. LEDs of the status display flash.
7
B
A
C
E
D
F
G
D
6