Walker Bay AIRIS Owners & Safety Manual - page 7
SPECIFICATIONS AND CAPACITIES*
HARDTOP
™
12’6 TOUR
HARDTOP
™
11’ SUV
HARDTOP
™
9‘ Stubby
*Specifications and capacities subject to change without notice.
Dimensions & Weights have a tolerance of plus or minus 3% & 5% respectively.
MODEL
1) Hi-Pressure AirWeb
™
hull
2) Fabric carrying handles
3) Front storage bungee
4) Rear storage bungee (11’ SUV only)
5) Rigideck
™
steps covered
with EVA foam
6) Large rear skeg for tracking
7) Attachment D-rings for optional
kayak backrest (11’ SUV & 9’ Stubby only)
8) Velcro rod/paddle holder (11’ SUV only)
9) Valve
10) Surf leash attachment ring
11) Backpack
12) Hi-Pressure pump with guage
13) Repair kit
14) Kayak backrest (Sold separately)
FEATURES & COMPONENTS
FOLDING INSTRUCTIONS
1
2
3
4
5
6
7
8
9
11
12
13
14
275
250
225
125
110
100
150
132
108
31
31
31
80
80
80
380
335
274
34
26.5
20
15.4
10.5
9
Note: When folding and storing your board avoid doing it in a way that will bend the skeg.
There are several ways of doing this, the following illustrations show one way, you may prefer
to do it differently.
If the skeg does become bent you can straighten it by gently heating it (For example with a
hair dryer) and bending it by hand.
1) First make sure the board is
completely deflated.
2) Fold the nose towards the
Rigideck
™
steps.
3) Fold the tail over the Rigideck
™
steps.
4) Fold the tail so the skeg is
pointing up.
5) Fold the board in half so the
skeg is kept flat between the
Rigideck
™
steps.
6) Once folded store the
board inside the bag
provided to keep it
protected.
1
2
3
4
5
6
2b
2c
3b
1
2
10