Clarity ® extra high-frequency enhancing phone model: w1100 www.Walkerclarity.Com e s p a Ñ o l f r a n Ç a i s e n g l i s h user guide.
Safety instructions : .................................. 3 installation : ..................................................... 7 features : ............................................................. 11 • clarity ® power control .......................................... 12 • boost control .........
E n g l i s h 3 safety instructions • unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. • do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basemen...
W-1100 clarity extra 4 safety instructions • never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. • to reduce the risk...
E n g l i s h 5 the following items are included as part of the cs-03 requirements. The load number of the equipment is 20. The standard connecting arrangement code for the equipment is ca11a. Notice: the canadian department of communications label identifies certified equipment. This certification ...
W-1100 clarity extra 6 c g a b f d e inside you will find the following items: a. Handset b. Handset line cord (coiled, 10 ft.) c. Base unit d. Phone line cord (long, flat) e. Desk/wall-mounting bracket f. Ac adapter g. This user’s guide carefully remove all of the contents from the package. If ther...
E n g l i s h 7 warning: to prevent electrical shock, always remove the telephone line cord from the wall jack before removing the cord from the telephone. Never leave the line cord connected to the wall jack if it is not also connected to the telephone. Ac adapter should be unplugged when not in us...
W-1100 clarity extra 8 boost mute help program signal 1 2 3 4 5 6 7 8 9 10 redial flash hold clarity walker extra installation note: if you are plugging the phone into an older 4-prong jack, use an rj11c adapter rj-11c installation view flat cord here coiled cord here ac adapter 120 volt outlet ac a...
E n g l i s h 9 walker clarity comes assembled with mounting bracket attached in desk mount position. For wall mounting simply remove bracket, rotate 180 ° and reattach as shown. To install as a wall unit: important: a modular wall jack with raised mounting pins is required for installation as a wal...
W-1100 clarity extra 10 warning: to prevent electrical shock, always unplug the telephone line cord and ac adapter from the wall before removing the cord from the telephone. Never leave the cord connected to the wall if it is not also connected to the telephone. • hold the walker clarity so that the...
E n g l i s h 11 walker clarity ® features 15 2 3 4 1 8 6 5 9 10 11 12 13 14 16 17 18 19 20 7 1. Clarity power control ® 2. Boost button 3. Clarity on/off switch 4. Sound level indicator 5. Ringer volume control 6. Visual ringer 7. Ringer pitch control 8. Warble control 9. Tone/pulse selector 10. La...
W-1100 clarity extra 12 your walker clarity is packed with features that will help you improve your communi- cations over the telephone. ➤ clarity power control ® the clarity power control allows you to control the clarity of your phone conver- sations. It will let you hear clearly phone calls that ...
E n g l i s h 13 ➤ ringer controls the walker clarity comes with a special low-frequency ringer designed to be easily heard by everyone. The ringer also comes with a volume, pitch and warble control, allowing it to be tai- lored to each user. The ringer volume control has three settings: off, low, a...
W-1100 clarity extra 14 note for users with pulse/rotary ser- vice only: many automated answering systems used by banks, stores and gov- ernment agencies ask you to “push 1 for service”, “push 2 for the operator”, etc. You must switch the tone/pulse switch on the top edge of the phone to tone before...
E n g l i s h 15 ➤ hold this advanced feature on your walker clarity allows you to put a call on hold, hang up and switch to another extension or have a private conversation that you don’t want the person on the other end of the phone to hear. You will be able to hear the person on the other end, bu...
W-1100 clarity extra 16 operating the walker clarity ® 3. When placing a call, dial as you would any phone and wait for someone to answer. 4. Press the boost button 5. Adjust the clarity power control up- wards to a level where the other party’s voice is heard loud and clear, and begin conversation....
E n g l i s h 17 programming numbers into memory the walker clarity allows you to program in one emergency number and ten fre- quently dialed numbers into memory for future use. By doing so, you will only have to press one button to place a call. As a matter of safety, write these important numbers ...
W-1100 clarity extra 18 programming 4. Dial the number you wish to store. The number is not transmitted while you are programming it. You can program a pause into the dialing sequence, if necessary. Since there is not a separate pause button on the phone, the redial button serves this purpose during...
E n g l i s h 19 the walker clarity has been designed to give you years of dependable service with a minimum of care. To ensure the utmost in performance, follow these guidelines in caring for the unit: care • avoid dropping or knocking the unit. • dust the unit regularly. Wipe the unit with a soft,...
W-1100 clarity extra 20 •␣ loss of numbers programmed into memory —your clarity phone will maintain its memory for up to 12 hours during a power loss. If you unplug the phone from the telephone line for long periods or lose your phone service for an extended period of time you will need to reprogram...
E n g l i s h 21 trouble-shooting guide ➤ static on line • interference from household appliances —your clarity phone may be located near a touch lamp, microwave or refrigerator which may cause interference. Relocating your phone to another area may eliminate the problem. —a cordless phone on your p...
W-1100 clarity extra 22 trouble-shooting guide ➤ compatibility •␣ clarity phones are compatible with digital pbx systems —if a standard, single line phone works, your clarity phone should also work. •␣ clarity phones are not compatible with key systems or at&t pbx systems —these units have a large e...
E n g l i s h 23 your walker clarity® has been registered with the federal communications commission (fcc). This product complies with standards of part 68 of the fcc rules. The fcc requires us to provide you with the following information: 1.␣ connection and use with the nationwide telephone networ...
W-1100 clarity extra 24 federal communications commission requirements part 15 of fcc rules interference information some telephone equipment generates and uses radio-frequency energy and, if not installed and used properly, may cause interference to radio and telephone recep- tion. Your walker clar...
E n g l i s h 25 walker equipment limited warranty * walker equipment warrants each item of new telephone equipment manufactured by it against defects in material or work- manship for a period of one year from the date of original purchase. Your purchase includes the following warranty which is in l...
W-1100 clarity extra 26 walker warranty service for questions regarding warranty service from walker on your walker clarity, please call the following toll-free number: 1-800-552-3368 exclusions and limitations your walker clarity warranty does not cover: • damage by negligence, misuse, or accident....
E n g l i s h 27 walker service purchaser’s responsibility in order to obtain service under this warranty, you must send the walker clarity to: walker equipment attn: repair department 4009 cloud springs rd. Ringgold, ga 30736 provide proof of purchase along with the phone when you send it in. Failu...