Walther DigiViewPro Operating Instructions Manual - Caution
3
EN
CAUTION
Read these instructions carefully before using the device.
This night scope is a sensitive optoelectronic, digital low-light amplifier and should be
used only under low-light conditions. The image amplifier in the unit can be permanently
damaged by strong light.
The device is equipped with an infrared (IR) illuminator that can be used as an additional
light source. Keep in mind, however, that the beam is also visible to other night vision
devices. Therefore use it with caution.
This device does not show differences in colour. You will only see a black-and-white image.
If you need to distinguish colours, you will always have to make a visual check. Only
specially trained persons may use the device to drive a vehicle or fly an airplane. Always
observe national regulations.
Do not dismantle the device. Do not recharge the batteries, subject them to heat or throw
them into a fire. Improper use can cause a life-threatening explosion or chemical fire. If you
do not intend to use the device for a long period, remove the batteries and store them in a
cool, dry place.
WARRANTY
The Umarex company will repair or replace your device free of charge (up to 12 months
from date of purchase) provided the defect was not caused by you. Return the device to the
authorised dealer from where you bought it.