720p hd wireless ip camera k2 one smarteye one world ios android.
Speaker power interface status led/ wi-fi led wps reset did:view-227361-cewee 720p x series wifi ip camera(k2).
Easy set up step 1 download · wansview go to the app store or google play to search and download “ ” app to your supported device . Wansview app icon · or scan the qr code below to get the app..
· launch the wansview app, click to access add camera page and select“add cameras via wifi mode”. Step 3 connect to network 1 2.
· check the camera’s blue light, if it is flashing slowly, please tap “blue light is flashing slowly”, and scan the qr code on the bottom of the camera, and name the camera. Then “next” (keep "admin" as login name and "123456" as the default password ). Qr code 3 k2.
· your wifi name will be located there (if the wifi is not what you want to connect. Please tap to switch the needed wifi),input the correct wifi password (wi-fi name and password should not contain special characters ' and & .)and click “connect to wifi”. And move your phone close to the camera and...
Always remember to change your password, tap the“ ”and then access to edit camera page, get into“advanced setting” then“user setting”, change password and click to save. > faq: 1.Change default password 3 1 4 5 6 2.
2.If the night vision stops working, please turn on the ir light as below: tap this icon to turn night vision on tap this icon to turn night vision off 720p.
3. If you forgot the password, hold the “reset” button around 15-20 seconds, then the camera will be back to factory default.Default user/password: admin/123456. Remember to configure wifi again after the reset. Reset.
Let us know what you think thank you so much for your order and trust to wansview. Please feel free to contact us if you have any questions about the product application. As a young and growing company, it would mean the world to us if you could leave an honest review about our product and services....
