Waring Blender Operating Manual

B

lender

O

perating

 M

anual

IMPORTANT

HOT BLENDING INSTRUCTIONS

To minimize the possibility of scalding when blending hot materials, the 

following precautions and procedures must be observed:

1)  If you are using the standard two-piece container lid that originally 

came with your blender, limit the amount of material processed to 

1/2 pint.

NOTE: A special accessory lid assembly is available for use with 

stainless steel containers only, which allows safe processing of

larger loads.

Order 1-Quart Hot Blending Lid, Catalog No. CAC14.

2)  If you are using the

 standard two-piece container lid, completely 

remove the center portion of the lid before turning blender on.This 

will allow venting of the rapidly heated and expanding air present 

inside container when blender is running. 

If you are using the 

special accessory lid, follow the instructions 

packed with the lid; venting will be accomplished automatically. 

3)  Always start blending on lowest speed setting, then progress to 

desire speed.

4)  Never stand directly over blender when it is being started or while 

running.

SERVICE

Refer to the list of Factory Approved Service Centers enclosed with  

your Waring Blender for the name of the nearest Service Center or 

Write to:

SERVICE CENTER

314 ELLA T. GRASSO AVENUE

TORRINGTON, CT 06790

(800) 269-6640

Ship Blenders for repair to the above address or to a Factory Approved 

Service Center.  Do not ship to a Waring Sales Office.

Replacement parts for your own “Out of Warranty” repairs are obtainable 

at the above address.

WARING COMMERCIAL

314 Ella T. Grasso Ave.

P.O.Box 3201

Torrington, CT  06790

www.waringproducts.com 

014775   RV05   0306