- DL manuals
- Waring
- Coffee Maker
- ES1500 PRO
- User manual
Waring ES1500 PRO User manual
Summary of ES1500 PRO
Page 1
Es1500 vero barista ® professional espresso maker for your safety and continued enjoyment of this product, always read the instruction book carefully before using..
Page 2: Important Safeguards
2 important safeguards when using any electrical appliance, basic safety precautions should always be taken, including the following: 1. Read all instructions. 2. Unplug from outlet when not in use, before putting on or taking off parts and before any cleaning or maintenance operations. 3. This appl...
Page 3: Save These Instructions
3 12. Children must be supervised at all times to ensure they do not play with the appliance. Do not allow children access to the plastic packaging bags. 13. Do not immerse the appliance in water or other liquids. 14. Before filling the tank with water, always disconnect the appliance from the elect...
Page 4: Contents
4 contents important safeguards ................................................................. 2 parts & assembly ........................................................................ 5 before first use ........................................................................... 7 ground espres...
Page 5: Parts & Assembly
K l m d f e i t p b q o r s c g h a n j j2 j1 j3 5 parts & assembly a. Main housing b. Water tank c. Water tube d. On/off switch e. Control lever f. Power indicator light g. Boiler temperature control light h. Steam function indicator light i. Boiler temperature thermometer (˚c & ˚f) j. Ground espre...
Page 6
6 f. Power indicator light (left) this light indicates that the on/off switch has been turned to the on position. This light will remain illuminated until the switch is turned to the off position. G. Boiler temperature control light (middle) this light will illuminate when the machine is at the righ...
Page 7: Before First Use
7 before first use 1. Check that the household voltage is the same as that indicated on the technical plate. 2. Place the espresso maker on a flat and stable surface where it will not be knocked over. 3. Wash the water tank and fill it with cool tap water up to the line marked max. Place the water t...
Page 8: How to Make Espresso
8 how to make espresso please visit us at waringpro.Com for an online video demonstration. Be sure that the machine is fully preheated and the boiler temperature control light (g) is on before preparing beverages. Using ground espresso 1. Attach either the single or double espresso spout (k) onto th...
Page 9: Using A Pod
9 4. Depending on the espresso spout used, place one or two cups underneath the espresso spout and pull the control lever (e) forward/towards the espresso cup symbol. Allow espresso to dispense to the desired level (a standard shot of espresso is approximately 1 ounce in size). To stop dispensing, r...
Page 10: Note: When Removing
10 to stop dispensing, raise the control lever back to the vertical standby position, as indicated by the dot. Just a few seconds are needed for the espresso to flow down into the cup(s). If the dispensing time is longer, this may mean that the espresso pod is inserted incorrectly. Note: do not remo...
Page 11
11 3. Pour cold milk into a stainless steel frothing pitcher. Keep in mind that the volume of milk will increase during the texturizing. 4. Initially, a little bit of hot water will come out of the steam/ water wand, so you may wish to purge the steam wand of any water. To do so, place a cup underne...
Page 12: Dispensing Hot Water
12 note: do not touch hot water coming from the spout. The boiler temperature control light (g) will turn off a few seconds later to indicate the boiler thermostat has intervened. The machine will be ready for making espresso as soon as the light (g) turns on again. Little puffs of steam may come ou...
Page 13: Cleaning & Maintenance
13 cleaning & maintenance parts are not dishwasher safe; hand-wash only. Cleaning the ground espresso holder (j) turn the filter counterclockwise and lift to remove it. Underneath is the two-part crema enhancer silicone disk and plastic base. Wash the silicone disk under running water, bending it sl...
Page 14: Cleaning The Housing
14 cleaning the internal boiler it is recommended to thoroughly clean the boiler about every three months, using a dishwasher detergent tab (without added rinse aid or other chemical additives) as follows: 1. Put a dishwasher detergent tab into the pod holder (without espresso) when the machine is h...
Page 15
15 1. Be sure the machine is unplugged and in the off position. 2. Remove the water tank and fill it to capacity with a mixture of ¹/³ white vinegar and ²/³ water. Place the water tank back into place. 3. Plug the machine in and turn it to the on position. 4. Place a large container under the coupli...
Page 16: Problem:
16 problem: cause: solution: the espresso maker does not supply boiling water. Air has probably entered the circuit and deactivated the pump. Make sure the water tank is properly inserted and that the water is not below the minimum level. The steam exit hole on the steam/water wand is clogged. Unclo...
Page 17: Problem:
17 problem: cause: solution: espresso is overflowing from the edges of the coupling seat. (continued) faulty pod wait a minute or so and slowly remove the holder from the housing. Caution: any remaining pressure could cause hot espresso/water to splash. Replace the pod. The espresso is not supplied ...
Page 18: Problem:
18 problem: cause: solution: the espresso is not supplied or flows too slowly. (continued) broken pod. Remove the pod filter holder, clean the coupling seat with a sponge, and put a new pod inside. The espresso is too watery and cold. The blend has been ground too coarsely. A more finely ground blen...
Page 19: Notes
19 notes.
Page 20
Trademarks or service marks of third parties used herein are the trademarks or service marks of their respective owners. ©2014 waring consumer products 150 milford road east windsor, nj 08520 www.Waringpro.Com printed in china es1500 ib 13wr000858 ib-11226b.