Summary of FP25
Page 1
Operation manual for waring fp25 and fp25c food processors fp25c.
Page 2
3 important safeguards when using electrical appliances, basic safety precautions should always be followed including these: 1. Read all instructions. 2. Blades are sharp. Handle carefully. 3. Your waring ® food processor is a piece of kitchen equipment and like all other kitchen equipment, extreme ...
Page 3
5 4 contents important safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 grounding instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4
6 the parts the waring ® fp25 and fp25c food processors are compact, easy-to-use appliances. Completely assem- bled, the fp25 is only 19" high (48.9cm) and stores conveniently when not in use. For more compact stor- age, the cover can be stored upside down with the feed tube in the bowl. When stored...
Page 5
(batch bowl assembly continued) • place the cover on the bowl, with the feed tube on the left, slightly toward the front. The locking tabs on the cover should be at the left of the locking tabs on the front rim of the work bowl. • rotate the cover counterclockwise to lock it into place. When the cov...
Page 6
Assembly of continuous feed chute parts fp25c • clean and sanitize the motor base, and wash, rinse, and sanitize the continuous feed chute, cover, slinger disc, food pusher, food pusher insert and processing tools prior to initial use. • place the base on a counter or table near a 3-prong electrical...
Page 7
13 operating the controls • plug the machine into an electrical outlet. The outlet must be 110/120 volts, 60hz. • there are two control levers located on the base of the machine. They are on the front and they give you fingertip control of processing. They are large enough to find easily in case of ...
Page 8
15 14 food preparation • prepare all food items to be processed by washing and peeling as required. Remove pits, stones, and large seeds. • cut vegetables, meats, cheeses, etc. Into sizes that will fit into your choice of small feed tube or large feed tube for processing with accessory discs, or int...
Page 9
17 16 use instructions for accessory discs in the continuous feed chute fp25 & fp25c • assemble the bowl and accessory disc as instructed in the section titled, “assembly of batch bowl parts,” (see page 8). Or, assemble the continuous feed chute and accessory disc as instructed in the section titled...
Page 10
19 18 slicing operation prepare all food items to be processed by washing and peeling as required. Remove pits, stones, and large seeds. Be sure the food will fit into the proper feed chute. Foods such as carrots, cucumbers, etc., should be cut flat at both ends to provide a consistent slice through...
Page 11
21 20 troubleshooting this section describes potential problems and the correct solutions for them. Problems that cannot be solved with the guidelines listed below should be referred to one of the waring authorized service centers for assistance. A listing of authorized service agencies is supplied ...
Page 12
23 22 some of the discs and blades have aluminum components. Whether cleaning them manually or in a dishwasher, be sure to use a detergent that is safe for use with soft metals. Other types of cleaning detergents can cause corrosion of soft metals. A stiff bristle brush will help to knock food parti...
Page 13
25 24 limited warranty five year limited motor warranty two year limited parts and labor warranty waring commercial warrants that this product's motor shall be free from defects in material and workmanship for a period of five years from the date of purchase when used with foodstuffs, nonabrasive li...
Page 14
27 26.
Page 15
©2005 314 ella t. Grasso ave. Torrington, ct 06790 www.Waringproducts.Com waring ® is a registered trademark of waring products division of conair corporation. Any other trademark or service marks used herein are the trademarks or service marks of their respective owners. 05wc30026 ib-3672.