Waring LB10 Operation Instructions

Page of 2

Download

Bookmark us

Variable Speed Blender LB10

OPERATION INSTRUCTIONS

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed.

READ ALL INSTRUCTIONS FOR VARIABLE SPEED BLENDER.

2. To protect against electrical hazards do not immerse motor unit in water or any liquid.

3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

4. Avoid contacting any moving parts.

5. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions

or is dropped or damaged in any manner. Return appliance to the Waring Service Center for

examination, repair or electrical or mechanical adjustment.

6. Do not use outdoors.

7. Do not let cord hang over the edge of table or counter, or touch hot surfaces.

8. Keep hands and utensils out of container when blending to prevent the possibility of severe

personal injury and/or damage to the blender.

9. Always operate the blender with the cover in place.

OPERATION

1. Make sure that power switch is in the off position.

2. Turn knob counterclockwise to its minimum setting.

3. BEFORE CONTINUING MAKE SURE THAT THE BLENDER CONTAINER IS SECURELY ON

THE BASE UNIT.

4. Turn power switch on the unit to the on position.

5. Rotate speed control knob clockwise increasing the blender speed to the desired point.

NOTE:

If you desire to start from a set speed follow the preceding steps 1-3 and then set the

desired speed before turning the blender power switch to the ON position.

FOR MORE INFORMATION ON WARING FULL LINE OF LABORATORY BLENDERS AND

ACCESSORIES CONTACT US AT THE FOLLOWING ADDRESS.

Waring Products

P.O. Box 3201

314 Ella T. Grasso Ave.

Torrington, CT 06790

Phone: 1-800-492-7464

E-mail: www.waringproducts.com

193-019274 RV01 0006

Page 1
Variable speed blender lb10 operation instructions important safeguards when using electrical appliances, basic safety precautions should always be followed. 1. Read all instructions for variable speed blender. 2. To protect against electrical hazards do not immerse motor unit in water or any liquid...
Page 2
Service refer to the list of authorized service centers enclosed with your waring blender for the name of the nearest service center, or write to: ship blender for repair to the above address or to an authorized service center. Do not ship to a waring sales office. Note: if your application involves...