Professional popcorn maker wpm25 for your safety and continued enjoyment of this product, always read the instruction book carefully before using. Pop off w aring p ro.
Important safeguards when using any electrical appliance, basic safety precau- tions should always be followed, including the following: 1. Read all instructions before using your popcorn machine. 2. Do not touch hot surfaces. Always use handles or knobs to operate. 3. To avoid any risk of electrica...
16. Turn all switches to off position before disconnecting power plug from the wall supply outlet. 17. Not recommended for outdoor use. 18. Do not use appliance for other than intended use. 19. To avoid overheating, always add oil and then kernels before operating. 20. Extreme caution must be used w...
B) if the appliance is of the grounded type, the extension cord should be a grounding 3-wire cord. C) the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally. Parts 1. Housing 2. Kettle, lid an...
Assembling procedure figure 2 hook the kettle onto the hanger of the main unit. Figure 4 finally, insert the internal kettle plug into the socket on the inner top of the popcorn housing. Figure 3 insert tray. Pop off w aring p ro pop off w aring p ro pop off w aring p ro figure 1 place door on hinge...
Popping instructions 1. Follow assembly procedure. 2. Make sure the popcorn maker is unplugged before you do any of the following. 3. Before using the unit, please check carefully to be sure voltage (120v – 60 hz ) is suitable to your home. 4. Clean the internal surface of the kettle with warm sudsy...
12. Remove plug from power supply if the unit is not being used. 13. Repeat steps 8 to 10 for continuous popping. Cleaning and maintenance it is strongly recommended to clean the kettle frequently to avoid burning excess oil onto the bottom of the inner pot. After using the popcorn machine, let it c...
©2008 waring products division of conair corporation 150 milford road east windsor, nj 08520 www.Waringproducts.Com printed in china wpm25 ib 08wr170 ib-8541 any other trademarks or service marks of third parties herein are the trademarks or service marks of their respective owners..
