Waring WPM28 Series Instruction Manual

Manual is about: Waring Pro WPM28 Series Professional Popcorn Maker

Summary of WPM28 Series

  • Page 1

    Wpm28 series professional popcorn maker for your safety and continued enjoyment of this product, always read the instruction book carefully before using..

  • Page 2: Contents

    2 contents important safeguards .................................................................2 power cord instructions .............................................................4 parts ...........................................................................................5 before first us...

  • Page 3: When Storing In An Appliance

    3 12. Kettle surface is hot and should not be touched during popping or just after use. 13. Do not touch hot surfaces. Always use handles or knobs to operate. 14. This appliance should not be used by or near children or individuals with certain disabilities. 15. Allow hot parts to cool down before m...

  • Page 4: Power Cord Instructions

    4 power cord instructions 1. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord. 2. Longer, detachable power supply cords or extension cords may be used if care is exercised in their use. 3. If a long detachable power supply c...

  • Page 5: Parts

    5 parts 1. Housing 2. On/off switch 3. Kettle 4. Kettle handle 5. Internal kettle plug 6. Kettle lid 7. Kettle lid handle 8. Kettle stirrer 9. Door (removable) 10. Tilt door (removable) 11. Unpopped kernel catcher & screen 12. Kettle release tab 13. Kettle hook 14. Accessories – oil measuring spoon ...

  • Page 6: Before First Use

    6 before first use make sure the popcorn maker is unplugged before you perform the following: 1. Check to be sure the voltage (120v – 60 hz) is suitable to your home. 2. Clean the internal surface of the kettle with warm soapy water; rinse well and dry with a clean cloth. Wipe down inner and outer h...

  • Page 7

    7 3. Insert the internal kettle plug into the socket on the top of the popcorn maker housing. 4. Insert the kernel catcher and screen at the bottom of the popcorn maker housing. This will help to separate any unpopped kernels from the popcorn. 5. Attach tilt door. 6. Place door on hinges..

  • Page 8: Popping Instructions

    8 popping instructions 1. Be sure that the popcorn maker has been assembled properly before plugging in and popping. 2. Plug the main power cord into an electrical outlet. 3. Add 2 tablespoons of oil (vegetable, canola, corn, peanut or safflower oil) and ½ cup of corn kernels to the kettle; lower th...

  • Page 9: Cleaning & Maintenance

    9 cleaning & maintenance after using the popcorn maker, let it cool completely. Use a wet cloth to clean the housing and doors. It is strongly recommended to clean the kettle frequently to avoid burning excess oil onto the bottom of the inner pot. 1. Turn the power switch to the off position. 2. Pou...

  • Page 10: Notes

    10 notes _______________________________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________ ___________________________...

  • Page 11: Notes

    11 notes _______________________________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________ ___________________________...

  • Page 12

    Trademarks or service marks of third parties used herein are the trademarks or service marks of their respective owners. ©2014 waring consumer products 150 milford road east windsor, nj 08520 www.Waringpro.Com printed in china wpm28 ib 14wr004325 ib-12492.