Warm Audio WA-2A Manual - page 10
line level, transformer
balanced input
600 ohms impedance pin 2/tip=positive, pin
3/ring=negative, pin 1/sleeve=ground
line level, transformer
balanced output
600 ohms impedance pin 2/tip=positive, pin
3/ring=negative, pin 1/sleeve=ground
frequency response
+/- 1 DB, 15 HZ TO 20KHZ
maximum gain
+40 dB ±1dB
maximum peak reduction
-40 dB ±3dB
input level
+16 dB maximum
output level
+10 dB nominal, +16 dB maximum
distortion
Less than 0.1% THD at ±10 dBm
noise
-74
dB
attack time
10 milliseconds
release time
0.06 seconds for 50% release; 0.5 to 5 seconds
for complete release
tube compliment
2x 12AX7, 1x 12BH7, 1x 6P1 (compatible with
6aQ5, 6005, and 6N1N)
optical attenuator
Kenetek T4B module (socketed) (compatible with T4A,
T4B, and T4C modules per standard wiring
configuration to standard octal header
power
115/230 volts (switchable), 50/60 Hz,
standard IEC 3 conductor cord
fuse compliment
1x 250v, 1amp fast-blow type fuse
dimensions
19” Rackmount chassis, 2U. 19” x 7” x 3.5”
weight
12 lbs