1. DL manuals
  2. WarmlyYours
  3. Food Warmer
  4. TW-E2CP
  5. Installation & Operation Manual

WarmlyYours TW-E2CP Installation & Operation Manual

Manual is about: WarmlyYours - Elements Towel Warmer - Installation & operation manual

Summary of TW-E2CP

  • Page 1

    Installation & operation manual for warmlyyours towel warmers.

  • Page 2: Safety Information

    Thank you for choosing a fi nely crafted towel warmer from the elements™ collection by warmlyyours. Now you can enjoy the luxury of a warm towel everyday. These models are so easy to install and use. Just plug the towel warmer unit into a standard 120v outlet, pre-heat your towel warmer and enjoy a ...

  • Page 3: Installation

    Installation this appliance must be installed in accordance with the instructions in the manual and the nec guidelines relating to electrical fi xtures in bathrooms. We recommend that the towel warmer be plugged into a gfci protected circuit. Install the towel warmer as close to an electrical outlet...

  • Page 4: Step 1

    Affi xing the towel warmer to the wall note: install the towel warmer no less than 1 foot from the fl oor and near an electrical outlet. The electrical outlet must be properly grounded. Position the brackets on the towel warmer to ensure that the towel warmer is fi rmly affi xed to the wall. See pag...

  • Page 5: Step 6

    Step 6 with the brackets now in place, adjust the towel warmer to desired position and fully tighten the screws into place. Step 7 plug the towel warmer into a gfci 120v, 15a electrical outlet. Enjoy! 4.

  • Page 6: Warning

    Affi xing the towel warmer to the wall - cont’d warning measure all dimensions prior to rough-in and installation. Elements™ model: tw-e2cp * note: anchor points must be attached to a stud. † note: drywall mounted bracket location is recommended, but can move up to 2” (51mm) horizontally as desired....

  • Page 7: Warning

    6 affi xing the towel warmer to the wall - cont’d warning measure all dimensions prior to rough-in and installation. Elements™ model: tw-e3cp anchor points * * note: anchor points must be attached to a stud. † note: drywall mounted bracket location is recommended, but can move up to 2” (51mm) horizo...

  • Page 8: Warning

    7 affi xing the towel warmer to the wall - cont’d warning measure all dimensions prior to rough-in and installation. Elements™ model: tw-e4pcp anchor points * anchor points * pin hole * note: anchor points must be attached to a stud. † note: 12” between brackets is recommended, but the top bracket c...

  • Page 9: Warning

    8 bracket assembly and installation diagrams warning measure all dimensions prior to rough-in and installation. Elements™ model: tw-e2cp stud drywall anchors quantity 6 brackets quantity 3 screws quantity 6 install this bracket with holder side facing downward. Do not use drywall anchors on stud.

  • Page 10: Warning

    Bracket assembly and installation diagrams - cont’d warning measure all dimensions prior to rough-in and installation. Elements™ model: tw-e3cp 9 stud drywall anchors quantity 6 brackets quantity 3 screws quantity 6 do not use drywall anchors on stud install this bracket with holder side facing down...

  • Page 11: Warning

    Bracket assembly and installation diagrams - cont’d warning measure all dimensions prior to rough-in and installation. Elements™ model: tw-e4pcp 10 anchor bolt quantity 4 bolt quantity 4 washer quantity 4 nut quantity 4 pin quantity 1 bracket quantity 2 half clamp quantity 4 half sleeve quantity 4 s...

  • Page 12: Operation

    Bracket assembly and installation diagrams operation all models of the elements™ towel warmer collection include an easy and accessible “on/off” button. Turn the power “on” by pressing the red “on/off” button located on the unit. Refer to diagram a. The “on” setting is indicated by an “i” and the “o...

  • Page 13: Specifications

    Specifications product construction - towel warmer the towel warmer is constructed with continuous 1” heavy gauge sphc steel tubing. The fi nished assembly is chrome plated and is heated by a ul listed wire which is designed for rapid and safe heating. The mounting brackets are chrome plated and man...

  • Page 14: Safety Guidelines

    Safety guidelines the main electrical line feeding the towel warmer must incorporate a ground fault circuit interrupter (gfci) for north america. Warmlyyours - elements towel warmer warranty warmlyyours.Com inc. Warrants the warmlyyours towel warmers (“the product”) to be free from defects in materi...

  • Page 15

    Warmlyyours.Com inc. Further disclaims any responsibility for special, indirect, secondary, incidental, or consequential damages arising from ownership or use of this product,including inconvenience or loss of use. There are no warranties which extend beyond the face of this document. No agent or re...