Warmup CDP-2 Installation Instructions - page 3
™
The world’s
best-selling electric floor heating brand
™
The world’s
best-selling electric floor heating brand
WARMUP INC.
USA: us@warmup.com
Tel.: 1-888-927-6333
www.warmup.com
CANADA: ca@warmup.com
Tel.: 1-888-592-7687
www.warmup.ca
CDP-2 SNOW SENSOR CONTROL/DISPLAY PANEL
INSTALLATION INSTRUCTIONS
HOME AUTOMATION INTERFACE
The CDP-2 also includes an input for optional home
automation control. This interface provides the capability to
trigger the system through telephone or computer control.
Closure of the Trigger and Enable inputs will start one snow
melting cycle, just as though the MANUAL ON button was
pressed. Once the cycle is complete the sensor will revert
to AUTOMATIC mode.
The Enable input is an optional connection point for a
second “safety” contact set. If used, both contact sets
must close to trigger the snow melt system. This can help
eliminate inadvertent cycling of the system. If only one
contact set is available the user may install a jumper wire
across terminals 3 & 4. The user may also connect a simple
toggle switch across the Enable input to allow manual
enabling and disabling of the home automation interface.
LIMITED WARRANTY
The CDP-2 is warranted against defects in workmanship and materials for two years from date of sale.
This warranty does not apply to damage resulting from accident, misuse, or alteration nor where connected
voltage to the attached snow sensor is more than 5% above the configured operating voltage, nor to
equipment improperly installed or wired or maintained in violation of this Owner’s Manual. No other
written or oral warranty applies. No employee, agent, dealer or other person is authorized to give any
warranties on behalf of Warmup.
The customer shall be responsible for all costs incurred in the removal or reinstallation and shipping of the
product for repairs. Within the limitations of this warranty, inoperative units should be returned, freight
prepaid, to Warmup, and we will repair or replace, at our option, at no charge to you with return freight
paid by Warmup. It is agreed that such repair or replacement is the exclusive remedy available from
Warmup and that WARMUP IS NOT RESPONSIBLE FOR DAMAGES OF ANY KIND, INCLUDING INCIDENTAL AND
CONSEQUENTIAL DAMAGE.
Some states do not allow the exclusion or limitation of incidental or consequential damages so the above
exclusion may not apply to you. The warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.