Warner Telecom Group UX5000 Quick Reference Manual - page 3
10
Transfer A Caller To A Mailbox
Use this procedure to transfer a caller directly into a co-workers voice
mailbox without ringing the telephone.
While on the call
Press
HOLD Key
Press
your
VMsg Softkey in display
Press Hotline key or dial extension number of co-worker
Hang-up
Other Voicemail Features
Transferring a co-worker into voicemail:
If a co-worker calling from outside the office wants to check messages,
you may transfer them into voicemail by doing the following:
Press
HOLD Key
Dial
700(0) (Voicemail Extension Number)
Hang-up
The co-worker will hear the company greeting and can dial # + Extension
Number to log on to mailbox.
Leave a quick message for a co-worker:
You can leave a quick message for a co-worker with out accessing your
own voice mailbox:
Dial Extension Number of co-worker
Press
8
Leave
message
Note: You can press * to bypass a co-workers greeting.
3
Answer A Call
At Your Phone:
When your telephone rings
Lift handset or press SPK Key to answer call
Your
CALL 1 Key will be red to indicate you are on a call
Note: If your telephone is programmed with outside line keys,
the line that you are using will be Lite green.
Answer Another Phone Ringing:
Lift handset or press SPK Key
Press
* *
+ Extension Number that is ringing
Place A Call
Internal Extension
Lift handset or press SPK Key
Dial Ext. No. or Press Hotline Key
*Note: You can press 1 after the Ext. No. to switch between voice and tone intercom
calling.
Outside Call
Lift handset
Press
available
Line Key if programmed or Press 9
Dial
telephone
number
Speakerphone Operation
You can place and answer calls by pressing the SPK Key instead of
using the handset.
Using Microphone Cutoff
During a speakerphone call
Press
MIC Key to mute microphone
Key will light up red
Callers will be unable to hear you, but you will be able to
hear the caller
Press
MIC Key again to turn microphone on
*Note: During a speakerphone call, you can lift the handset to make the
call private. Press SPK and hang up handset to return to speakerphone.