Warnock Hersey Patio Plus Installation, Operating, & Maintenance Instructions

Manual is about: Patio Plus infrared patio heaters

Summary of Patio Plus

  • Page 1

    1 this appliance is tested and approved for use in winds up to 15 mph. (25 km/hr.) do not use if wind is exceeding 15 mph. (25 km/hr.) or damage will result. Patio plus infrared patio heaters installation, operating & maintenance instructions this manual must be left with the purchaser/user of this ...

  • Page 2

    2 in all cases, the installation of this appliance must conform with all national, state/provincial, local and applicable codes for the installation of gas fired appliances. Only persons familiar with such codes and certified for the installation of gas appliances are authorized to install patio plu...

  • Page 3

    3 infrared heat patio plus heaters are effective in heating outdoor spaces because they utilize infrared or radiant heat. Infrared energy is the same type of warmth we get from the sun. Infrared energy warms people and objects without heating the intervening air. Unlike the sun, patio plus heaters d...

  • Page 4

    4 important safety rules 1. Children and adults should be alert to high surface temperatures of areas above the post when operating this heater. 2. Children should be carefully supervised when they are in the area of the heater. 3. Never hang anything including clothes or other flammable items on th...

  • Page 5

    5 “patio plus” infra red heaters are available for both l.P. And natural gas and are approved for indoor & outdoor applications. This appliance must only be used with the fuel for which it was originally labeled. Do not convert this heater to an alternate fuel without first consulting the manufactur...

  • Page 6

    6 warning (care & use of l.P. Cylinders) l.P. Gas cannot be used on units designed for natural gas. Natural gas cannot be used on units designed for l.P. If your heater is designed for use with an l.P. Cylinder, the cylinder must meet the following requirements: cylinder weight is 20 lb. (9.07 kg): ...

  • Page 7

    7 assembly instructions (portable models) ph-45-20-p-lp (liquid propane) (for use with 20 lb. Propane cylinder) ph-45-30-p-lp (liquid propane) (for use with 20 lb. & 30 lb. Propane cylinders). Step 1 carefully remove all packages from the main packing box. Remove the base assembly from the interior ...

  • Page 8

    8 assembly instructions model ph-45-fs-lp & model ph-50-fs-n free standing model for use will approved flexible supply line. S tep 1 determine a safe, level and suitable location for the weighted base. Step 2 remove the 3/8” x 1” bolt in the base of the heater head and set aside. (figure 2 previous ...

  • Page 9

    9 assembly instructions ph-45-fb-lp (liquid propane), ph-50-fb-n (natural gas), ph-45-fb-r-lp (liquid propane & ph-50-fb-r-n (natural gas). Fixed base model for permanent mounting to deck or patio. (“r” indicates heater with remote switching option. Requires switched 24 volt power supply to heater.)...

  • Page 10

    10 assembly instructions inground post model ph-45-ig-lp (liquid propane), ph-50-ig-n (natural gas) ph-45-ig-r-lp & ph-50-ig-r-n for permanent inground post mounting. (“r” indicates heater with remote switching option. Requires switched 24 volt power supply to heater.) step 1 determine a safe, level...

  • Page 11

    11 assembly instructions ph-45-h-lp (liquid propane) & ph-45-h-r-lp (liquid propane) ph-50-h-n (natural gas) & ph-50-h-r-n (natural gas) hanging model - complete with hanging bracket for suspending below an existing supporting structure. Step 1 determine a safe and appropriate location for the heate...

  • Page 12

    12 test firing heater leak test all gas connections with soapy water. Soap bubbles indicate gas leakage. Do not use an open flame to test for leaks. Test fire the heater following the lighting instructions on the heater post. To light pilot push and turn the control knob to “pilot” position. Continu...

  • Page 13

    13 troubleshooting installation, servicing and maintenance of patio plus heaters must only be performed by licensed technicians trained and educated in the installation and servicing of this type of gas appliance. Problem possible causes solution pilot won’t light -no gas to burner -low gas pressure...

  • Page 14: Easy Radiant Works

    14 maintenance keep the heater area clear and free from combustible materials and flammable vapours and liquids. Do not obstruct the flow of combustion and ventilation air. Keep the ventilation opening of the cylinder enclosure clean and free from debris. Visually inspect the burner flame for abnorm...

  • Page 15

    15.