WARPP INTIG 200 IDS Operation Manual - page 11
MACHINE PROTECTION FUNCTION
protection
when the machine is in the situation of over load, welding machine will stop the weld work,
machine will be in the over load situation of stop work. In this situation, welding machine
protection (overload light) light will power off. And, after the machine become cooling
automatically, machine will come back for the normal working situation for weld, and the
over load light power on.
over heat protection
when machine working temperature surpass the normal temperature, welding machine
will stop the work, and come into the machine protection situation automatically. At this
moment, people should have a check with the machine cooling fan working situation,
welding machine is being in the good ventilation or not.
regarding the MMA function
welding machine could use the kinds of MMA weld stick with the rated output power,
including the steel welding stick, ALU stick and CrAL weld stick and so on.
MMA weld stick recommend parameter
Metal thickness
=< 4mm
4-12mm
<12mm
Weld stick diameter
3.2-4mm
>=4mm
output power pole chosen
generally, weld black metal, when the weld stick is for the acidity weld, it is chosen the
positive connection. but, for alkaline weld, it is chosen the negative connection.