WARRIOR 68113 Owner's manual & safety instructions - Large Mandrel Setup

Page of 4

Download

Bookmark us

Page 3

For technical questions, please call 1-800-444-3353.

Items 68113/68990

Large Mandrel Setup

Unthread the knurled Locking Collar

to retract the Locking Pins.

Locking Pins

Locking Collar

Thread Hole Saw onto Collar Thread until the

Locking Pins align with the Holes in the Saw.

It just needs to align, it does not need to be tight.

Hole

Saw

Collar Thread

(Align pins with holes.)

Tighten the knurled Locking

Collar to extend the

Locking Pins through the

holes in the Hole Saw.

Tighten the knurled Locking

Collar securely to hold

the Hole Saw in place.

Page 1
Item 68113 68990 visit our website at: http://www.Harborfreight.Com email our technical support at: tech@harborfreight.Com read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright © 2011 by harbor freight tools ® . All rights reserved. ...
Page 2: Save These Instructions.
Page 2 for technical questions, please call 1-800-444-3353. Items 68113/68990 important safety information 1. Wear ansi-approved safety goggles and heavy-duty work gloves during setup and use. 2. Set contains sharp blades. Keep away from children. 3. Use correct size arbor for selected hole saw. 4. ...
Page 3: Large Mandrel Setup
Page 3 for technical questions, please call 1-800-444-3353. Items 68113/68990 large mandrel setup a. Unthread the knurled locking collar to retract the locking pins. Locking pins locking collar b. Thread hole saw onto collar thread until the locking pins align with the holes in the saw. It just need...
Page 4: Operation
Operation 1. Holding the drill at 90° to the workpiece, set the hole saw on the workpiece. 2. Press the drill’s trigger to turn it on. 3. If the drill is a variable speed type, cut the workpiece slowly until a circle groove is made in the workpiece. Then cut faster. 4. When the hole is cut, release ...