Warwick Amplifier Quad IV Owner's Manual

Other manuals for Amplifier Quad IV: Owner's Manual, User Manual, Wiring Diagram
Manual is about: amplifier head/combo

Summary of Amplifier Quad IV

  • Page 1

    Official warwick amp owner manual english.

  • Page 2: Amps

    Amps 4 congratulations on the purchase of the new warwick amplifier head/combo. Please read these instructions through before connecting and operating the device. If you keep to the guidelines set out in this manual, you will soon be able to appreciate the quality of this new warwick amplifier. Plea...

  • Page 3: Pro Tube Ix

    Pro tube ix 23 ground lift switch isolates the earth connection from the ground of signal. Should several devices be simultaneously connected to earth by the same conductor as well as via line connections, a so called hum loop might appear. In this case operate ground lift to eliminate the current h...

  • Page 4: Pro Tube Ix

    24 pro tube ix di out left and di out right sockets for supplying a stage or studio mixing console. Tuner out socket for the connection of a tuner. When mute mode is activated, the unmodified bass signal is retained here. Mono loop for the serial insertion of dynamic effects units (e.G. Compressor, ...

  • Page 5: Pro Tube Ix

    Pro tube ix 25 this channel is equipped with two tubes. One preamp tube is always included within the signal flow. 2nd stage switch adds one output stage tube into the circuit. This feature offers the choice between a so called hybrid amplifier (tube preamp with transistor power amp) and the sound o...

  • Page 6: Pro Tube Ix

    26 pro tube ix examples these setting examples aim at helping you to better handle with the control stage and to utilise it for the realisation of your sound conceptions. Set channel 1 according to the examples and adjust the tone control to the left and to the right within the suggested area, respe...

  • Page 7: Pro Tube Ix

    Pro tube ix 27 two switches low boost and high boost to pre-adjust the basic sound characteristics. Ten faders 35/70/140/210/420/730/1.2k/2.5k/5k/10k hz to amplify/soften the respective frequency band by +/-12 db. You should generally adjust the graphic eq to approximately 0 db. This means boosts an...

  • Page 8: Notes

    28 notes pro tube ix.

  • Page 9: Amps

    30 amps pro fet iii 25 mv transistor, active controlled none fan cooled (non permanent) bass, punch, param. Mids with freq. And level controls, attack, treble, low boost and high boost switches. Dyn. Control with switchable limiter none 200 Ω 0 db, 600 Ω mono serial send 0 dbu, 600 Ω return 0 dbu, 1...

  • Page 10: Circuit Diagram

    42 circuit diagram pro tube ix.

  • Page 11

    Headquarters: warwick gmbh&co.Music equipment kg•gewerbegebiet wohlhausen•08258 markneukirchen/germany•tel 0049-(0)37422-555-0 fax 0049-(0)37422-555-99 • send us an e-mail to: info@warwick.De • visit us on the world wide web: http://www.Warwick.De branch china: warwick music equipment (shanghai) ltd...