1. DL manuals
  2. Warwick
  3. Amplifier
  4. BC10
  5. Owner's Manual

Warwick BC10 Owner's Manual

Manual is about: BASS COMBO AMPLIFIERS

Summary of BC10

  • Page 1

    Owner’s manual bass combo amplifiers bc10 bc20 bc40 bc80 bc150 family owned ◊ solar powered ◊ sustainably manufactured in a green environment.

  • Page 3

    Index introduction 5 safety instructions 6 product information bc10 8 bc20 10 bc40 12 bc80 14 bc150 16 troubleshooting 18.

  • Page 5: Introduction

    Introduction a series of compact amplifiers for bass instruments like nothing you have seen or heard before. These full frequency, extended headroom, integrated combo amps could be used for virtually any amplified instrument but are specifically tuned to the unique needs of electric and upright bass...

  • Page 6: Safety Instructions

    Safety instructions caution: to reduce the risk of electrical shock, do not remove the cover as there are no user serviceable parts inside. Refer servicing to qualified personnel. This symbol, wherever it appears, alerts you to the presence of noninsulated dangerous voltage inside the enclosure - vo...

  • Page 7: For Bc150:

    Important safety instructions 1. Read these instructions 2. Keep these instructions 3. Heed all warnings 4. Follow all instructions 5. Do not use this apparatus near water 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacture’s instruction...

  • Page 8: Bc10

    Bc10 • combo amplifier for bass instruments • passive and active inputs • class-a preamp with low-z circuitry for minimum noise and maximum headroom • 10 watt power amp • 8” warwick wxc 8/8 bass driver • 3-way eq with controls for bass, mid and treble • ddl (dynamic distortion limiter) for distortio...

  • Page 9: Front Panel Controls

    Front panel controls active – input to plug in instrument using shielded guitar cable. This input is low sensitivity to suit the output from instruments with active electronics. Passive – input to plug in instrument using shielded guitar cable. This input is high sensitivity to suit the output from ...

  • Page 10: Bc20

    Bc20 • combo amplifier for bass instruments • passive and active inputs • class-a preamp with low-z circuitry for minimum noise and maximum headroom • 20 watt power amp • 8” warwick wxc 8/8 bass driver • 2” warwick wtr 2/8 neodymium high-frequency driver • 3-way eq with controls for bass, mid and tr...

  • Page 11: Front Panel Controls

    Front panel controls active – input to plug in instrument using shielded guitar cable. This input is low sensitivity to suit the output from instruments with active electronics. Passive – input to plug in instrument using shielded guitar cable. This input is high sensitivity to suit the output from ...

  • Page 12: Bc40

    Bc40 • combo amplifier for bass instruments • passive and active inputs • class-a preamp with low-z circuitry for minimum noise and maximum headroom • 40 watt power amp • 10” warwick wxc 10/8 bass driver • 2 ” warwick wtr 2/8 neodymium high-frequency driver • 3-way eq with controls for bass, mid and...

  • Page 13: Front Panel Controls

    Front panel controls active – input to plug in instrument using shielded guitar cable. This input is low sensitivity to suit the output from instruments with active electronics. Passive – input to plug in instrument using shielded guitar cable. This input is high sensitivity to suit the output from ...

  • Page 14: Bc80

    Bc80 • combo amplifier for bass instruments • passive and active inputs • line out • send/return on front panel • class-a preamp with low-z circuitry for minimum noise and maximum headroom • 80 watt power amp • 12” warwick wxc 12/8 bass driver • 2” warwick wtr 2/8 neodymium highfrequency driver • 4-...

  • Page 15: Front Panel Controls

    Front panel controls active – input to plug in instrument using shielded guitar cable. This input is low sensitivity to suit the output from instruments with active electronics. Passive – input to plug in instrument using shielded guitar cable. This input is high sensitivity to suit the output from ...

  • Page 16: Bc150

    Bc150 • combo amplifier for bass instruments • passive and active inputs • line out • send/return on front panel • class-a preamp with low-z circuitry for minimum noise and maximum headroom • 150 watt power amp • 15” warwick wxc 15/8 bass driver • 4” warwick wtr 4/8 high-frequency driver • 4-way eq ...

  • Page 17: Front Panel Controls

    Front panel controls active – input to plug in instrument using shielded guitar cable. This input is low sensitivity to suit the output from instruments with active electronics. Passive – input to plug in instrument using shielded guitar cable. This input is high sensitivity to suit the output from ...

  • Page 18: Troubleshooting

    Troubleshooting when your unit seems to not work properly, take a few minutes to troubleshoot before calling service. You can save yourself time and money by doing it yourself, because the source of problem is often something quite simple. What is the problem? • there is no sound from the amp and le...

  • Page 20

    Headquarters: warwick gmbh & co. Music equipment kg • gewerbepark 46 • 08258 markneukirchen / germany • e-mail: info@warwick.De branch china: warwick music equipment (shanghai) ltd., co.• zhao jia bang road no 108, 3rd floor • 200020 lu wan district/shanghai/p.R.China • e-mail: info@warwick.Cn branc...