Owner’s manual bass amplifier head lwa 1000 family owned ◊ solar powered ◊ sustainably manufactured in a green environment.
Index introduction 3 safety instructions 4 product features 7 optional accessories 7 front panel description 8 rear panel description 9 channel selector footswitch 10 setup guide 10 troubleshooting 11.
Introduction congratulations! On the purchase of your new warwick lwa 1000 bass amplifier head. Two channels of true 1000 watt power in a compact, lightweight design is now in your hands. Our considerations in the design of this product were multifold and our objectives were to provide: • an afforda...
Safety instructions caution: to reduce the risk of electrical shock, do not remove the cover as there are no user serviceable parts inside. Refer servicing to qualified personnel. This symbol, wherever it appears, alerts you to the presence of noninsulated dangerous voltage inside the enclosure - vo...
15. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 16. Never set the amplifier on a support tha...
Protective circuits your new warwick lwa 1000 amplifier is equipped with a multitude of protective circuits to prevent it from malfunction under inappropriate operating conditions. Over current protection: all amplifier channels are over current protected on outputs. Current clipping is engaged when...
Product features • 1000 watt bass amplifier head. • lightweight and ultra-portable. • class a preamp circuitry. • class d power amp section. • two independent channels. • channels can be selected remotely with footswitch. • separate input gain control for each channel. • mute function (separate for ...
Front panel description (indicators 1-9 shown only for channel 1, channel 2 has exactly identical corresponding functions) 1. Input jack – accepts a standard 6.25mm (1/4 ” ) audio jack for connecting active or passive basses using a properly shielded cable. 2. Gain – adjusts the input gain of the pr...
Back panel description 1. Mains power on/off switch – for your safety remember to connect the power cord from the mains outlet to the amplifier before turning this switch on. Conversely, when disconnecting the amp, turn the switch off first, then disconnect cord from the outlet and finally disconnec...
Channel selector footswitch your new lwa 1000 comes with a footswitch and supplied cable provided for remote channel switching capability. Simply route your instrument through the footswitch and connect to one of the amplifier inputs. 1. In – use a standard guitar cable to connect your instrument to...
Troubleshooting we apologize if your new amplifier doesn’t work as intended. We recommend this simple diy troubleshooting because often the solution to the problem is most likely simpler than it seems. • amp does not power up. - check whether the correct fuse is inserted in the fuse compartment and ...
Headquarters: warwick gmbh & co. Music equipment kg • gewerbepark 46 • 08258 markneukirchen / germany • e-mail: info@warwick.De branch china: warwick music equipment (shanghai) ltd., co.• zhao jia bang road no 108, 3rd floor • 200020 lu wan district/shanghai/p.R.China • e-mail: info@warwick.Cn branc...
