- DL manuals
- Warwick
- Musical Instrument Amplifier
- LWA 500
- Owner's Manual
Warwick LWA 500 Owner's Manual
Summary of LWA 500
Page 1
Owner’s manual bass amplifier head lwa 500 family owned ◊ solar powered ◊ sustainably manufactured in a green environment.
Page 2
Index introduction 3 safety instructions 4 product features 7 optional accessories 7 front panel description 8 rear panel description 9 setup guide 10 troubleshooting 11.
Page 3: Introduction
Introduction congratulations! On the purchase of your new warwick lwa 500 bass amplifier head. True 500 watt power in a compact, lightweight design is now in your hands. Our considerations in the design of this product were multifold and our objectives were to provide: • transparent and noise-free s...
Page 4: Safety Instructions
Safety instructions caution: to reduce the risk of electrical shock, do not remove the cover as there are no user serviceable parts inside. Refer servicing to qualified personnel. This symbol, wherever it appears, alerts you to the presence of noninsulated dangerous voltage inside the enclosure - vo...
Page 5
15. Warning: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. 16. Never set the amplifier on a support tha...
Page 6: Protective Circuits
Protective circuits your new warwick lwa 500 amplifier is equipped with a multitude of protective circuits to prevent it from malfunction under inappropriate operating conditions. Over current protection: all amplifier channels are over current protected on outputs. Current clipping is engaged when ...
Page 7: Product Features
Product features • lightweight and ultra-portable. • class a preamp circuitry. • class d power amp section. • separate input gain control. • mute function. • 4-band equalizer. • adjustable compressor with bypass function. • compression knob simultaneously controls the compression amount and make-up ...
Page 8: Front Panel Description
Front panel description 1. Input jack – accepts a standard 6.25mm (1/4 ” ) audio jack for connecting active or passive basses using a properly shielded cable. 2. Gain – adjusts the input gain of the preamp stage. 3. Signal level led – this led, when green indicates that the input is at least 0dbu (0...
Page 9: Back Panel Description
” back panel description 1. Mains power on/off switch – for your safety remember to connect the power cord from the mains outlet to the amplifier before turning this switch on. Conversely, when disconnecting the amp, turn the switch off first, then disconnect cord from the outlet and finally disconn...
Page 10: Setup Guide
Setup guide 1. Unpacking – carefully unpack unit from the carton box. 2. Powering up – ensure the mains power switch is in ” off ” position and then connect the supplied power cord from the ac mains socket of the amplifier to the mains power outlet. Now flip the power switch on the amplifier to the ...
Page 11: Troubleshooting
Troubleshooting we apologize if your new amplifier doesn’t work as intended. We recommend this simple diy troubleshooting because often the solution to the problem is most likely simpler than it seems. • amp does not power up. - check whether the correct fuse is inserted in the fuse compartment and ...
Page 12
Headquarters: warwick gmbh & co. Music equipment kg • gewerbepark 46 • 08258 markneukirchen / germany • e-mail: info@warwick.De branch china: warwick music equipment (shanghai) ltd., co.• zhao jia bang road no 108, 3rd floor • 200020 lu wan district/shanghai/p.R.China • e-mail: info@warwick.Cn branc...