Washtech GLV Operator's Manual - page 7
Operation
Description of Controls
Operating Instructions
Start up
Fit drain upstand with filter, scrap trays and shut door.
Turn wall and machine power switches on.
Power light glows red and machine fills automatically
When Wash Ready light and Rinse Ready light glow amber the machine is
ready to run and may be started.
Operation
Load rack into machine and shut door.
Press Start button (1, 2 or 3) for 1, 2 or 3 minute cycle accordingly.
Cycle light glows green while machine operates.
When Cycle light goes out, cycle is complete.
Remove rack. Close door.
NOTE: Machine will not operate unless Ready lights are on.
Shut down every night
Open the door and turn Drain switch on.
After drain starts remove scrap trays and drain upstand when the top
of the upstand is above the surface of the water.
Allow to drain for approximately 1 minute.
Turn Drain and Power switches off.
Rinse clean scrap trays and upstand filter and replace.