Summary of GM
Page 1
Operator manual gm.
Page 2: Service 1 800 622 216
Warning before installation and commissioning, you must read the safety instructions and warnings carefully and all the warning labels attached to the equipment. Important failure to comply (even partially) with the instructions given in this manual will invalidate the product warranty and relieves ...
Page 3: Safety Instructions
Safety instructions 2 m2 high performance passthrough dishwasher - operator manual warning before installation and commissioning, you must read the safety instructions and warnings carefully and all the warning labels attached to the equipment. Important failure to comply (even partially) with the i...
Page 4: Installation Checklist
Unpack • unpack the machine, check for damage and complete delivery. Positioning • place machine on sound waterproof self draining floor and adjust feet to level • allow room for adjacent chemical containers water • flush supply lines before connection • connect hose supplied to adjacent accessible ...
Page 5: Gm Installation Diagram
Gm installation diagram gm inst 24-11-14 3c 5 gm - operator manual 141218.
Page 6: Operating Procedures
Pre-rinsing pre-scraping of dishes is required by food hygiene regulations. The best method is to pre-rinse with warm water with a fisher pre-rinse unit - or alternatively by scraping or dunking in water. Cutlery should be pre-soaked in warm water, preferably containing cutlery pre-soak compound - r...
Page 7: Operating Procedures
Pre-rinsing pre-scraping of dishes is required by food hygiene regulations. The best method is to pre-rinse with warm water with a fisher pre-rinse unit - or alternatively by scraping or dunking in water. Cutlery should be pre-soaked in warm water, preferably containing cutlery pre-soak compound - r...
Page 8: User Programming
8 gm - operator manual 141218 user settings default selection power save on on/off detergent injection time 12 5 - 30 secs display contrast 27 10 - 40 user programming the user settings menu is accessed for programming by pressing the up and down keys simultaneously for a few seconds. The programmin...
Page 9: Troubleshooting
9 gm - operator manual 141218 fault cause remedy filling not filling water supply valve shut check water supply valve door switch not operating check door is closed filling during wash cycle upstand not fitted properly check drain upstand is fitted heating dishes not hot enough rinsing but not hot c...
Page 10: Gm7 Wiring Diagram
10 gm - operator manual 141218 gm7 wiring diagram 060247 19/12/14 3d gm7(w) wiring diagram.
Page 11: Accessories
11 gm - operator manual 141218 accessories code description 0428001 cuprack 450mm 0428002 dishrack 450mm c660503 g cutlery container.
Page 12
Information supplied in this manual is copyright. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical without the express permission of the author/publisher distributed in australia by moffat pty limited 740 springvale road mulgrave 3170 victoria au...