Summary of WPD220VF
Page 1
Wpd-220 vf pole display user’s manual.
Page 2
© copyright wasp technologies ® 2002. All rights reser ved. Version 1.0 no part of this publication may be reproduced or transmitted in any form or by any means without the written permission of wasp technologies ® . The information contained in this document is subject to change without notice. Was...
Page 3: Table of Contents
Table of contents introduction ..........................................................................................................1 general specifications..........................................................................................2 interface specifications .........................
Page 4: Wpd-220 Vf User’S Manual
1 wpd-220 vf user’s manual introduction introduction thank you for choosing the wpd-220vf pole display. The wpd-220vf provides both reliability and performance in a professional looking design.In this guide, you will find connection and configuration information to help you connect the display to yo...
Page 5: Specifications
Specifications item wpd-220vf display method vacuum fluorescent display display color blue green number of characters 40 characters(20 columns x 2 lines) brightness 700 cd/m2 character type 96 alphanumeric 13 kinds of international character set and 1 user-defined set character font 5 x 7dot matrix ...
Page 6: Serial Port (Rs232C)
Serial port (rs232c) serial port (rs232c) communication (a) this interface specification is based on eia rs232c baud rate 300 to 38400 bps, 8 data bits, none parity, 1 or more stop bits (b) serial port (rs232c) communication data link data link flow chart: pc/host display display printer printer pc/...
Page 7: Wpd-220 Vf User’S Manual
4 wpd-220 vf user’s manual system command details baud rate stx 05 b n etx /set baud rate and keep it with eeprom/ ascii format stx 05 b n etx dec. Format [02][05][66] n [03] hex. Format [02h][05h] [42h] n [03h] 30h description change the display communication baud rate. The baud rate setting can be...
Page 8: Loading The Ribbon
5 loading the ribbon wpd-220 vf user’s manual system command details save data for demo display stx 05 l n m etx save demo message to eeprom ascii format stx 05 l n m etx dec. Format [02][05][76] n m [03] hex. Format [02h][05h][4ch] n m [03h] description save demo message for upper line and bottom l...
Page 9: Wpd-220 Vf User’S Manual
6 wpd-220 vf user’s manual system command details set communication option stx 05 p n etx set the communication parity ascii format stx 05 p n etx dec. Format [02][05][80] n [03] hex. Format 02h][05h][50h] n [03h] 31h description change the display communication parity. Set 7 or 8 data bit and the p...
Page 10: Wpd-220 Vf User’S Manual
7 wpd-220 vf user’s manual command command list standard mode command code description (hex) function description esc dc1 1b 11 overwrite mode esc dc2 1b 12 vertical scroll mode esc dc3 1b 13 horizontal scroll mode esc q a ..........Cr 1b 51 41 [n ]x20 0d set the string display mode, write string to...
Page 11: Wpd-220 Vf User’S Manual
8 wpd-220 vf user’s manual command (cont.) standard mode (cont.) command code description (hex) function description clr 0c clear display screen, and clear string mode can 18 clear cursor line, and clear string mode esc * n 1b 2an 1 ≤ =n ≤ =4 brightness adjustment esc & s n m [a(p1..Pa)]x 1b 26 1 n ...
Page 12: Wpd-220 Vf User’S Manual
9 wpd-220 vf user’s manual command (cont.) epson esc/pos command list command code description(hex) function description ht 09 move cursor right bs 08 move cursor left us lf 1f 0a move cursor up lf 0a move cursor down us cr 1f 0d move cursor to right-end position cr 0d move cursor to left-end positi...
Page 13: Wpd-220 Vf User’S Manual
10 wpd-220 vf user’s manual command (cont.) epson esc/pos command list command code description(hex) function description esc = n 1b 3d n (default n=2) select peripheral device n=1; enable printer, disable display n=2; disable printer, enable display n=3; enable printer, enable display for cd7220d o...
Page 14: Wpd-220 Vf User’S Manual
11 wpd-220 vf user’s manual command (cont.) standard command details esc dc1 /overwrite mode/ ascii format esc dc1 dec. Format [027][017] hex. Format [1bh][11h] description change the display mode to the overwrite mode. In this mode, the cursor will move rightward and begin from the upper left-end p...
Page 15: Wpd-220 Vf User’S Manual
12 wpd-220 vf user’s manual command (cont.) esc dc3 /horizontal scroll mode/ ascii format esc dc3 dec. Format [027][019] hex. Format [1bh][13h] description change the display mode to the horizontal mode. In this mode, the extent of the cursor activity is bound by a predefined range, limited to the u...
Page 16: Wpd-220 Vf User’S Manual
13 wpd-220 vf user’s manual command (cont.) esc [ d /move cursor left/ bs /move cursor left/ ascii format esc [ d dec. Format [027][091][068] hex. Format [1bh][5bh][44h] ascii format bs dec. Format [008] hex. Format [08h] description if the current cursor is at the left-end position, this command wi...
Page 17: Wpd-220 Vf User’S Manual
14 wpd-220 vf user’s manual command (cont.) 1.Overwrite mode:when the cursor reaches the right- end of the lower line, it will continue to the left-end of the upper line, overwriting previous characters. When it reaches the right-end of the upper line, it will continue to the right-end of the lower ...
Page 18: Wpd-220 Vf User’S Manual
15 wpd-220 vf user’s manual command (cont.) hex. Format [0ah] description move the cursor down one line . When the cursor reaches the lower line, this command will operate differently depending on the display mode. 1.Overwrite mode:the cursor is moved to the same column on the upper line. 2. Vertica...
Page 19: Wpd-220 Vf User’S Manual
16 wpd-220 vf user’s manual command (cont.) esc [ r /move cursor to right-most position/ ascii format esc [ r dec. Format [027][091][082] hex. Format [1bh][5bh][52h] description the cursor will be moved to the right-end position of the current line. Esc [ k /move cursor to bottom position/ ascii for...
Page 20: Wpd-220 Vf User’S Manual
17 wpd-220 vf user’s manual command (cont.) cancelled (values: x1, x2, and y are not required.) when s = 1 the window will be reset (values: x1, x2, and y are required.) the x1 and x2 set the position of the left column and right column, respectively, of the window. The y sets the upper line or the ...
Page 21: Wpd-220 Vf User’S Manual
18 wpd-220 vf user’s manual command (cont.) esc _ n /set cursor on or off / ascii format esc _ n dec. Format [027][095] n {0 ≤ =n ≤ =1} hex. Format [1bh][5fh][n] description: set cursor on or off when n = 0, cursor is off when n = 1, cursor is on esc f n /select international font/ ascii format esc ...
Page 22: Wpd-220 Vf User’S Manual
19 wpd-220 vf user’s manual command (cont.) description the n defines the beginning character code, and m defines the ending character code. When only one character is defined, use n = m the "a" denotes the number of dots in the horizontal direction.When a side of the user-defined characters are pad...
Page 23: Wpd-220 Vf User’S Manual
20 wpd-220 vf user’s manual command (cont.) description this command is successful when the display is selected under command esc=03h, if eeprom is not supported, this command is ignored. Esc d 1 /restore the user defined character from eeprom. (eeprom type only)/ ascii format esc d 1 dec. Format [0...
Page 24: Wpd-220 Vf User’S Manual
21 wpd-220 vf user’s manual character set (1) control code set hex code hex code 00h null 10h dle 01h md1 11h dc1 02h md2 12h dc2 03h md3 13h dc3 04h md4 14h dc4 05h md5 15h 06h md6 16h 07h md7 17h 08h bs,md8 18h can 09h ht 19h 0ah lf 1ah 0bh hom 1bh esc 0ch clr 1ch 0dh cr 1dh 0eh sle1 1eh sf1 0fh r...
Page 25: Wpd-220 Vf User’S Manual
22 wpd-220 vf user’s manual character set (cont.) (2) u.S.A font set 0 1 2 3 4 5 6 7 8 9 a b c d e f ..... ..O.. .O.O. .O.O. ..O.. Oo... .Oo.. .Oo.. ...O. .O... ..... ..... ..... ..... ..... ..... ..... ..O.. .O.O. .O.O. .Oooo oo..O o..O. ..O.. ..O.. ..O.. ..O.. ..O.. ..... ..... ..... ....O ..... ....
Page 26: Wpd-220 Vf User’S Manual
23 wpd-220 vf user’s manual dimensions 1.Wpd-220vf 2. Short pole 3.Wpd-220vf converter 4. Long pole 5. Metal plate 6. Rectangle base 7. Circular base.
Page 27: Wpd-220 Vf User’S Manual
24 wpd-220 vf user’s manual installation guide l1 l2 l3 l4 l5 19.69" 20.87" 17.32" 11.77" 8.23".