1. DL manuals
  2. Wassermann Dental-Maschinen
  3. Power Tool
  4. HSM-500
  5. User Manual

Wassermann Dental-Maschinen HSM-500 User Manual

Manual is about: bench top rotary tool

Summary of HSM-500

  • Page 1

    Wassermann dental-maschinen gmbh user manual hsm-500 bench top rotary tool.

  • Page 2

    - 1 - dear customer, thank you for choosing a product from the wassermann range. Wassermann dental equipment incorporates the highest standards of quality and the latest technology. In order to enjoy maximum performance and years of trouble-free operation from the equipment, please read this user ma...

  • Page 3

    - 2 - contents contents ....................................................................................................................................2 1 for your safety ..................................................................................................................3 1.1 c or...

  • Page 4

    - 3 - 1 for your safety 1.1 correct use of this product this laboratory equipment is designed for working with dental materials (stainless steels, plastics, ceramics, etc.) in dental laboratories using rotating tools. 1.2 safety symbols used in this manual warning! This is a warning of risk situatio...

  • Page 5

    - 4 - danger! Do not touch the tool when it is rotating or coming to a stop! Be sure to follow the manufacturer’s guidelines for the maximum permissible speed of the rotating tools used. Take the following precautions before starting work: • wear eye protection • use a protective visor 1.4 handpiece...

  • Page 6

    - 5 - 1.6 authorized users the owner of the equipment must ensure that any users have been provided with the user manual and that they have read and understood its contents before operating the equipment. Ensure that this user manual is accessible at all times and has been read and understood. 2 car...

  • Page 7

    - 6 - 2.2 care 2.3 cleaning and/or changing the chuck • turn off the mains power. • open the chuck (see 5.4) and remove the tip by turning it manually to the left. • insert the chuck key fully in the chuck. • hold the shaft firmly with an adjustable wrench. • remove the chuck by turning the chuck ke...

  • Page 8

    - 7 - 3 use / application the hsm – 500 is designed for working with dental materials such as stainless steels, plastics, ceramics, etc. In dental laboratories using rotating tools. Warning! This tool is not designed as medical equipment. It is not to be used on human beings. The tool is not to be u...

  • Page 9

    - 8 - 4.2 contents hsm-500 bench top unit 111100 handpiece 592013 mains cable 111102 hsm-350 / 500 cable 111103 handpiece holder 111896 bench top control 111150 cleaning set 511156 foot switch 5 switch functions 5.1 power switch the power switch turns the controller on/off. When the unit is on, the ...

  • Page 10

    - 9 - 5.5 changing rotating tools rotating tools can only be changed when the motorised handpiece has stopped completely. Dangerous! • turn the handpiece casing to the right to open the chuck. • remove the rotating tool. • push in the new tool until you feel the stop. • turn the handpiece casing to ...

  • Page 11

    - 10 - 6.2 removing and assembling the motorised handpiece a) removal • turn the power switch to off. • undo the motor cable swivel nut from the handpiece casing. • pull the cable plug out of the handpiece. B) assembly • take the cable plug and insert it into the handpiece in the correct orientation...

  • Page 12

    - 11 - 8 troubleshooting / correcting errors 8.1 faults faults likely cause likely solution faulty cable replace cable overload block work with less pressure red led flashes open chuck on handpiece close chuck thermal overload switch triggered turn unit off and allow to cool red led stays on system ...

  • Page 13

    - 12 - 8.3 spare parts spare parts item number description 111100 hsm-350 / 500 motorised handpiece 111102 handpiece cable 111103 handpiece holder 111151 cleaning oil 111152 brush 111154 adjustable wrench 111155 chuck key for 2.35 mm Ø chuck 111156 chuck key for 3 mm Ø chuck 511155 foot control 1111...

  • Page 14

    - 13 - 10 ec conformity certificate in accordance with 73/23/ewg (low-voltage guidelines) modified by 93/68/ewg and 89/336/ewg (emv guidelines) and 89/392/ewg (machinery guidelines), with modifications manufacturer: w a s s e r m a n n dental-maschinen gmbh rudorffweg 15 - 17 d-21031 hamburg product...

  • Page 15

    - 14 -.

  • Page 16

    Wassermann dental-maschinen gmbh rudorffweg 15 – 17, d-21031 hamburg tel.: + 49 (0)40 / 730 926 – 0 fax: +49 (0)40 / 730 37 24 e-mail: info@wassermann-dental.Com internet: http://www.Wassermann-dental.Com.