Watchman ICU11168P Operation Manual - page 10
WATCHMAN USER GUIDE - JULY 2011
10
In this chapter, these functions will be explained in detail:
3.1 Operating Modes available with the device:
(1) DISARM (Stay) Mode (AR0)
F
When disarmed the reporting system will be limited to
Panic Button, Smoke Sensor and Gas Sensor text and video
alarm.
(2) ARM (AWAY) Mode (AR1)
F
When armed, all security features are ready to report any
breach via text and video to the Administrators mobile
phone.
(3) NOT ACTIVE Mode (AR2)
F
When the NOT ACTIVE Mode is selected, no monitoring will
take place, however the panic alarm can be activated.
3.2
To operate the Remote Control
Description of the Remote Buttons:
By pressing the appropriate button the device can be
activated or deactivated from a reasonable distance from
the premises – 150 metres approx. The disarm/active mode is
instant and the arm mode takes 30 seconds to deploy. This
ensures you can arm the premises before leaving and disarm
on arrival without the need for a dedicated control panel.
The Remote is ideal to be incorporated as a key ring and can
【 】
DISARM Mode
【 】
ARM (AWAY) Mode
【 】
NOT ACTIVE Mode