Watec WAT-525EX2 Operation Manuals - page 2
1420Z00-Y2000003
10)
Set the gain control to any required environment.
For AGC, turn the AGC control anti-clockwise to the
locking position. AGC automatically adjusts to a
range between 5 to 32dB(HI)/5 to 20dB(LO).
With MGC, gain is manually adjusted in a range
between 5 to 32dB. In a low light environment,
when illumination of the object is important,
increase the manual gain. Lower the gain control
for a clearer picture with less noise.
11)
When the external sync. function is required, input the composite video
or the composite sync. signal to
⑨
SYNC IN. The range of the level for
composite sync. is 0.2 to 5.0V(p-p). The camera has a resistance of
10k
Ω
. When more than 75
Ω
termination is required for impedance
matching, add the additional
Ω
s to the external sync. signal line.
Options
To purchase these options, please contact the distributor or dealer from
which you purchased the WAT-525EX2/535EX2.
Specifications
WAT-525EX2
WAT-535EX2
WAT-525EX2/535EX2
Contact information
Watec Co., Ltd.
Watec Co., Ltd.
Watec Co., Ltd.
Watec Co., Ltd.
Add.: 254-2 Nihonkoku, Daihoji, Tsuruoka- Shi,
Yamagata-Ken, 997-0017 Japan
TEL:
+81-235-23-4400 FAX: +81-235-23-4409
Email:
info-o@watec.co.jp
URL:
http://www.watec.net
Model
WAT-525EX2 (EIA)
WAT-525EX2 (CCIR)
Pick-up Element
1/2 inch interline transfer CCD image sensor
Unit Cell Size
8.4
μ
m(H)
×
9.8
μ
m(V)
8.6
μ
m(H)
×
8.3
μ
m(V)
Minimum Illumination
0.002 lx. F1.4
Model
WAT-535EX2 (EIA)
WAT-535EX2 (CCIR)
Pick-up Element
1/3 inch interline transfer CCD image sensor
Unit Cell Size
6.35
μ
m(H)
×
7.4
μ
m(V) 6.5
μ
m(H)
×
6.25
μ
m(V)
Minimum Illumination
0.003 lx. F1.4
Model
WAT-525EX2 (EIA)
WAT-535EX2 (EIA)
WAT-525EX2 (CCIR)
WAT-535EX2 (CCIR)
Number of Total Pixels
811(H)
×
508(V)
795(H)
×
596(V)
Number of
Effective Pixels
768(H)
×
494(V)
752(H)
×
582(V)
Sync. System
Internal / External (Auto-select)
Scanning System
2:1 interlaced
Video Output
Composite video, 1.0 V(p-p) 75
Ω
(Unbalanced)
External Sync. System
C. video / C. sync.
External Sync.
Signal Level
Sync. Signal portion 0.2-5.0 V(p-p)
Resolution (H)
More than 570TVL (Center)
S/N
More than 54dB (AGC=5dB,
γ
=1.0)
OFF
1/60 sec.
1/50 sec.
FL
1/100 sec.
1/120 sec.
ES
1/250, 1/500, 1/1000, 1/2000,
1/5000, 1/10000, 1/100000 sec.
AE Mode
EI
1/60-1/100000 sec.
1/50-1/100000 sec.
AGC
HI: 5-32dB / LO: 5-20dB
MGC
5-32dB
Gamma Characteristics
γ
≒
0.45(ON) /
γ
=1.0(OFF)
Lens iris
Video / DC (EIAJ arrangement, Auto-select)
Back Light
Compensation
ON /OFF
Power Supply
DC+12V
±
10%
Power Consumption
1.08W (90mA)
Operating Temperature
-10
-
+50
℃
(Without condensation)
Operating Humidity
Less than 95% RH
Storage Temperature
-30
-
+70
℃
(Without condensation)
Storage Humidity
Less than 95% RH
Lens Mount
CS-mount (Back focus adjustable)
Size
43.5(W)
×
44(H)
×
53.5(D) mm
Weight
Approx. 120g
C-mount Adaptor (34CMA-R)
This lens mount adaptor is used
to convert a CS-mount to a
C-mount.
Mini Stand (MS50)
A convenient stand for the
WAT-525EX2/535EX2. With this
stand, the camera can be
adjusted to any desired angle.
Bracket (B003)
This bracket is effective for a
stable installation of the WAT-
525EX2/535EX2.
•
Design and specifications are subject to change without notice.
•
Watec is not responsible for any inconvenience or the attendant damages
to the video and monitoring recording equipment caused by misuse, mis-
operation or improper wiring of our equipment.
•
If for any reason the WAT-525EX2/535EX2 does not work properly, or if
you have any questions regarding installation or operation, please
contact the distributor or dealer from which it was purchased.