Dlc-100r water dispenser service manual prepared by water dispenser development dept nov. , 2004 s/n : dlc100r001.
Directory 1.Working principle ..................................................................................................................1 2.Main technical parameters ......................................................................................................1 3. Main components and...
I. Working principle the water dispenser is a kind of device, which provides bottled drinking water (distilled water, pure water, mineral water, etc.) or daily life water treated through purification equipment to people for drinking, after being heated, cooled or at its original water temperature. D...
Is fixed in the cold tank to determine water temperature. Medium. Advance. Compressor assembly(36): including ptc starter, condenser, etc., containing r134a cool-producing tap assembly(46,47): outlet of the water dispenser, made of edible grade plastic. Defrosting pan(37): receiving water overflowin...
Mounted. 2. The tap is broken or tap silica gel falls off. 2. Replace the tap. 3 hot water is not hot 1. 96 • bimetallic thermostat acts • 2. Heating wire has poor contact or is damaged. 1. Wait for 5 • 10 minute • the thermostat will self-reset • 2. Inspect or replace the hot tank. 4 cold water is ...
Attachment 1 water dispenser wiring principle diagram.
Attachment 2 water dispenser exploded view.
Attachment 3 compressor working principle and failure analysis brief outline of compressor cooling working principle the water dispenser compressor cooling system mainly includes compressor, condenser, filter, evaporator, capillary and other components. The water dispenser adopts a rotary compressor...
I. Methods for compressor maintenance 1. The single hermetic compressor has three terminals on the body: r • primary coil or moving coil t . . S • starting coil c • public poin 2. Judgment of compressor exhaust pipe oil vent generally, little oil discharges from a hermetic compressor. If oil is foun...
If it moves slightly, that would be good, and otherwise replace the compressor..
