Water tech tm notice: these products are manufatctured under one or more of the following patents: 6,797,157 6,939,460 d485,652 catfish ® pool blaster ® & pool blaster ® max cg.
Congratulations on your purchase of a top-quality water tech product which has been thoroughly tested to meet our exacting quality control standards. State of the art nickel-metal hydride batteries power the pool blaster. These are the same batteries used in many portable phones. In order to properl...
Service information warning: any repairs requiring disassembly should be performed by a water tech authorized service center. For the repair center nearest you call us toll free at 1- 800-298-8800. Warning: to reduce the risk of fire, electrical shock, injury, or damage to your machine: do not use i...
Product specifications handvac battery motor 7.2 volt, dc charger rating 120v, 60 hz ac only (us) 240 volts. 50hz ac only (international) switch on-off charger voltage 8.4 volt important safeguards item no. Description part no. Qty. 1 vacuum head pba006 1 2 vacuum head brushes (for vinyl pools) pbw04...
The battery pack for your pool blaster has been shipped in a low voltage condition. It should be charged overnight prior to use. Warning: the pool blaster charger is for indoor use only. Warning: do not expose charger to excessive moisture or extreme heat or cold. Charge battery only with the batter...
Your pool blaster has a unique patented vacuum head that can be adapted to use on all types of pool surfaces. We recommend the following: • for gunite, we recommend using the five (5) wheels (part no.Pbw050) which came with your pool blaster. The five wheels are inserted into the vacuum head (part n...
How to use your pool blaster caution: the pool blaster is designed for underwater use only. Do not attempt to use your pool blaster to clean anything other than your pool or spa. It is not intended for use as an all-purpose vacuum cleaner. Unit must be submerged in water to operate properly. Maximum...
Warning: never put the pool blaster in water while the charging jack is connected. Warning: to keep water out of the motor box, before submerging make sure the on/off knob is fully secured by turning all the way until it stops at a 12 o’clock position. Once your pool blaster is set-up for use, you m...
Important tips: • store your pool blaster in a clean, dry place when not in use. Do not leave it under- water, in direct sunlight, or exposed to extreme heat or cold. • you may clean the pool blaster body with soap and water. Avoid using solvents when cleaning plastic parts. Most plastics are suscep...
Common questions q: the on-off knob has become difficult to turn. What can i do? A: clean off the o-rings and add silicone lubricant/sealant. This will ensure easier turning and a better water tight seal. Refer to the maintenance section for more information. Q: can my pool blaster be run out of wate...
