WaterChef Countertop C7000 Installation, Use And Care Manual - Setup & Installation

3

www.waterchef.com

  1. Open the shipping carton, remove all System parts  

    and place them on your kitchen counter. 

  2. Compare them with the parts shown in this guide to be  

    certain all items were included (see inside front cover).

  3. Unthread and remove the aerator from the end of your  

    kitchen faucet if it has one.

 (fig. A)

  4. Thread the Diverter Valve directly onto your kitchen  

    faucet. Do not over-tighten.

 (fig. B)

  5. If the threads to the Diverter Valve do not directly  

    attach to your kitchen faucet, use one of the three  

    Adapters provided

. (fig. C)

  6. Most kitchen faucets with external threads will directly  

    attach to the Diverter Valve. In some instances the  

    Diverter Valve may be smaller than your kitchen faucet.  

    In this case use the adapter with internal threads and  

    thread it directly to your kitchen faucet. Next, thread  

    the Diverter Valve to the Adapter.

 (fig. D)

  7.  If your kitchen faucet has internal threads, thread 

    one of the two Adapters with external threads directly  

    to your kitchen faucet. Next, thread the Diverter Valve  

    to the Adapter.

 (fig. E)

  8. If your kitchen faucet does not have threads, measure  

    the inside diameter of the kitchen faucet and call  

    WaterChef Customer Care at 1.800.879.8909  

(int’l +1.775.359.9500)

 to request an Expandable Adapter.

  9. If your kitchen faucet does not fit any of the Adapters  

    provided, please call WaterChef Customer Care at  

  1.800.879.8909 

(int’l +1.775.359.9500) 

or check with your  

    local hardware store.

  (continued on next page)

SETUP & INSTALLATION

NOTE

This System is not recommended for installation on pull-out faucets.

A

B

C

D

E