WaterChef Countertop C7000 Installation, Use & Care Manual - page 3
3
www.waterchef.com
www.waterchef.com
2
1. Open the shipping carton, remove all System parts
and place them on your kitchen counter.
2. Compare them with the parts shown in this guide to be
certain all items were included (see inside front cover).
3. Unthread and remove the aerator from the end of your
kitchen faucet if it has one.
(fig. A)
4. Thread the Diverter Valve directly onto your kitchen
faucet. Do not over-tighten.
(fig. B)
5. If the threads to the Diverter Valve do not directly
attach to your kitchen faucet, use one of the three
Adapters provided
. (fig. C)
6. Most kitchen faucets with external threads will directly
attach to the Diverter Valve. In some instances the
Diverter Valve may be smaller than your kitchen faucet.
In this case use the adapter with internal threads and
thread it directly to your kitchen faucet. Next, thread
the Diverter Valve to the Adapter.
(fig. D)
7. If your kitchen faucet has internal threads, thread
one of the two Adapters with external threads directly
to your kitchen faucet. Next, thread the Diverter Valve
to the Adapter.
(fig. E)
8. If your kitchen faucet does not have threads, measure
the inside diameter of the kitchen faucet and call
WaterChef Customer Care at
1.800.879.8909
(int’l +1.775.359.9500)
to request an Expandable Adapter.
9. If your kitchen faucet does not fit any of the Adapters
provided, send your threaded aerator to:
WaterChef Customer Care
3760 Barron Way
Reno, NV 89511
Include a note requesting an Adapter that fits your threads.
(continued on next page)
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Countertop
Particle Retention Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sub-Micron
Intelligent Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LED
Rated Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,000 gallons (US)
Rated Service Flow. . . . . . . . . . . . . . . . . . . . . . . . . . . 0.65 gal/min @ 60 psi
Maximum Working Pressure . . . . . . . . . . . . . . . . . . . . . . . 100 psig (689.5 kPa)
Minimum Working Pressure . . . . . . . . . . . . . . . . . . . . . . . 30 psig (206.8 kPa)
Maximum Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . 100˚ F / 38˚ C
Minimum Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 34˚ F / 1˚ C
Replacement Filter Cartridge (includes Battery) . . . . . . . . . . . . . . . . . . . . . . CR70
EPA Establishment Number . . . . . . . . . . . . . . . . . . . . . . . . . . 63018-NV-001
Protected under U.S. Patent #: D408,494
Refer to Performance Data Sheet for actual contaminant and substance reduction capabilities.
ProdUCt sPeCIFICatIons
setUP & InstallatIon
note
This System is not recommended for installation on pull-out faucets.
WATERCHEF COUnTERTOP FILTRATIOn SySTEM
(Model: C7000)
3
2
4
6
1
5
IteM
Part #
desCrIPtIon
1
1215-55-05
Lid Assembly
(White)
1
1215-41-01
Lid Assembly
(Black)
2
4-104-0052-02
Battery Shuttle
(White) (includes Battery)
2
4-104-0052-01
Battery Shuttle
(Black) (includes Battery)
3
1215-10-37
Housing Assembly
(White
)
3
1215-20-40
Housing Assembly
(Black)
4
CR70
Filter Cartridge
(includes Battery)
5
0581-03-02
3/8” Diverter Valve Assembly
(White)
5
0581-03-15
3/8” Diverter Valve Assembly
(Black)
6
9-904-0023
Faucet Adapter Kit
(3 pieces)
a
B
C
d
e
rePlaCeMent Parts dIreCtory
System Tested and Certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chloramine, Chlorine
Taste and Odor, and nominal Particulate Class I and NSF/ANSI Standard 53 for the reduction of Cysts, Lead, VOC and MTBE.