Waterco DigiHeat 18kW Installation And Operation Manual

Summary of DigiHeat 18kW

  • Page 1

    Waterco limited abn 62 002 070 733 www.Waterco.Com notice to installer this manual contains important information about the installation, operation and safe use of this product. Once the product has been installed this manual must be given to the owner / operator of this equipment. This equipment mu...

  • Page 2

    Table of waterco digiheat in line heaters safety information ---------------------------------------------- 01 importance of water chemistry ---------------------------- 01 electrical & wiring ---------------------------------------------- 02 hydraulics & required flow rates ------------------------...

  • Page 3

    Waterco digiheat in line heaters electrical & wiring • water must flow from left to right (when facing the digiheat). There are arrows marked on the housing to assist in determining the correct direction. • the digiheat should be positioned upstream from any chemical dosing or chlorinator and a chec...

  • Page 4

    Waterco digiheat in line heaters installation digiheatsinglephasemodelscanbemounteddirectlyontothepipework,fixedtoawallorbase mounted.Wallandbasefittingsaresupplied. Digiheatthreephaseunitscanbemounteddirectlyontothepipeworkorfixedtoawall. Wallfittingsaresuppliedwiththeunit. Direct mounting onto pip...

  • Page 5

    Waterco digiheat in line heaters operating the digiheat afterfamiliarisingyourselfwiththelayoutandsettingsofthetouchpad(seeprevioussection),fillthe spa or pool with water and follow the instructions below. Wesuggestthatyouinstructallthepeoplewhowillusethespaorpoolfittedwiththedigiheaton how to opera...

  • Page 6

    Waterco digiheat in line heaters troubleshooting thespapumpshouldonlybeservicedbyqualifiedservicetechnicians.However,someproblems canbecheckedandrectifiedbytheownerbeforemakingaservicecall. Fault possible cause action display is blank nfl o/t no power check the isolating switch is on and not damaged...