Waterford EMERALD E63-LP1 Owners & Installation Manual

Summary of EMERALD E63-LP1

  • Page 1

    Fireplace products international ltd. 6988 venture st., delta, bc canada, v4g 1h4 warning: if the information in these instructions are not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. For your safety do not store or use gasoline or other...

  • Page 2

    2 waterford e63-1 emerald freestanding gas stove to the new owner: congratulations! You are the owner of a state-of-the-art emerald gas stove by waterford irish stoves. The waterford gas series of hand crafted appliances has been designed to provide you with all the warmth and charm of a woodstove, ...

  • Page 3: Table of Contents

    Waterford e63-1 emerald freestanding gas stove 3 table of contents page page operating instructions operating instructions ........................................................ 15 lighting instructions ........................................................... 15 shutdown instructions .............

  • Page 4: Safety Label

    4 waterford e63-1 emerald freestanding gas stove this is a copy of the label that accompanies each emerald freestanding gas stove. We have printed a copy of the contents here for your review. The safety label is located on the inside of the drop down pedestal door. Note: waterford units are constant...

  • Page 5: Safety Label

    Waterford e63-1 emerald freestanding gas stove 5 copy of the safety label for the e63-lp1 propane safety label for the state of massachusetts, installation and repair must be done by a plumber or gasfitter licensed in the commonwealth of massachusetts. For the state of massachusetts, flexible connec...

  • Page 6: Installation

    6 waterford e63-1 emerald freestanding gas stove 12) under no circumstances should this appli- ance be modified. Parts that have to be removed for servicing should be replaced prior to operating this appliance. 13) installation and any repairs to this appliance should be done by a qualified service ...

  • Page 7: Installation

    Waterford e63-1 emerald freestanding gas stove 7 optional fan installation fan kit contains: qty. Description 1 fan speed controller with nut, and knob. 1 fan assembly c/w green wire attached 1 power cord 1 plastic locking grommet 1) remove the top control panel assembly by removing the three screws...

  • Page 8: Installation

    8 waterford e63-1 emerald freestanding gas stove vent terminations installation into existing woodstove flue system 1) clean existing chimney system. 2) run an approved 4" flex liner or "b" vent into existing chimney. Draft hood this heater has a draft hood built in. It must not be altered, obstruct...

  • Page 9: Installation

    Waterford e63-1 emerald freestanding gas stove 9 installation system data - e63-1 (with 38,000 btu) for 0 to 2000 feet altitude burner inlet orifice sizes: natural gas propane burner #32 #50 *above 2000 ft. See national fuel code orifice chart. Max. Input rating natural gas 38,000 btu/h propane 38,0...

  • Page 10: Installation

    10 waterford e63-1 emerald freestanding gas stove installation 2) loosen the "in" (# 7) and/or "out" (# 6) pressure tap(s), turning counterclockwise with a 1/8" wide flat screwdriver. 3) attach manometer to "in" and/or "out" pressure tap(s) using a 5/16" id hose. 4) light the pilot and turn the valv...

  • Page 11: Installation

    Waterford e63-1 emerald freestanding gas stove 11 reduction kit to lower btu rating for emerald e65-1 gas stove natural gas - kit #: 260-920 propane - kit # 260-922 t his conversion must be done by a qualified gas fitter if in doubt do not do this conversion !! 4) carefully remove the logs, embers a...

  • Page 12: Installation

    12 waterford e63-1 emerald freestanding gas stove optional door grill installation door grill kit contains: qty. Description 1 front door grill 4 screws 4 grill clips 1) open the front door. Open the right side door and there is a cutout in the heat shield through which can be seen a wing nut thread...

  • Page 13: Installation

    Waterford e63-1 emerald freestanding gas stove 13 optional remote control use the waterford remote control kit approved for this unit. Use of other systems may void your warranty. The remote control kit comes with a hand held transmitter, a receiver and a wall mounting plate. 1) choose a convenient ...

  • Page 14: Installation

    14 waterford e63-1 emerald freestanding gas stove wiring diagram installation final check before leaving this unit with the customer, the installer must ensure that the appliance is firing correctly. This includes: 1) clocking the appliance to ensure the cor- rect firing rate (rate noted on label) a...

  • Page 15: Operating Instructions

    Waterford e63-1 emerald freestanding gas stove 15 operating instructions 3) wait five minutes to allow gas, that may have accumulated in the main burner com- partment, to escape. If you smell gas, follow the instructions on the front of this manual. If you don't smell gas continue on to the next ste...

  • Page 16: Operating Instructions

    16 waterford e63-1 emerald freestanding gas stove normal operating sounds of gas appliances it is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there are various gauges and types of steel used within your appliance. Listed below are so...

  • Page 17: Maintenance

    Waterford e63-1 emerald freestanding gas stove 17 log replacement the unit should never be used with broken logs. Turn off the gas valve and allow the unit to cool before opening door to carefully remove the logs. The pilot light generates enough heat to burn someone. If for any reason a log should ...

  • Page 18: Maintenance

    18 waterford e63-1 emerald freestanding gas stove maintenance removing valve if your valve requires maintenance or replace- ment, use the following instructions: note: always close off the gas supply before removing the valve. 1) if optional fan is installed, disconnect pow- er source to stove. 2) r...

  • Page 19: Maintenance

    Waterford e63-1 emerald freestanding gas stove 19 maintenance 10) remove all 8 screws holding the burner tray assembly in place. 11) carefully lift the burner tray assembly out. 12) to replace the burner tray assembly, simply reverse these instructions. To remove valve from valve assembly, continue....

  • Page 20: Parts List

    20 waterford e63-1 emerald freestanding gas stove parts list main assembly 1) w400141** emerald right door 2) 904-258 door magnet 3) 948-134 door stop 4) 44351 black butt hinge 5) w842001** emerald right side 6) 41211 tape gasket w/adhesive backing 7) * heat shield - right 8) * firebox - right 9) * ...

  • Page 21: Parts List

    Waterford e63-1 emerald freestanding gas stove 21 burner & log assembly 52) 910-190 piezo igniter with nut 56) 908-672 control panel decal 57) 490-061 switch plate 251-524/p valve assembly s.I.T. - natural gas 251-526/p valve assembly s.I.T. - propane 261-969 propane conversion kit 60) 910-378 valve...

  • Page 22: Notes

    22 waterford e63-1 emerald freestanding gas stove _____________________________________________________________________________________ ____________________________________________________________ __________________________________________________________ ____________________________________________...

  • Page 23: Warranty

    Waterford e63-1 emerald freestanding gas stove 23 warranty waterford fireplace products are designed with reliability and simplicity in mind. In addition, our internal quality assurance team carefully inspects each unit thoroughly before it leaves our facility. Fpi fireplace products international l...

  • Page 24

    Installer: please complete the following information dealer name & address: ______________________________________________ __________________________________________________________________ installer: ___________________________________________________________ phone #: ______________________________...